User`s guide

Setting up your player 2-3
Powering your
player
1. Connect the DC Adapter as shown in the diagram.
2. Turn on the power from the power source.
Charging the
battery
The high performance lithium battery supplied with your player needs to be fully charged before you use
it. Your player’s built-in battery charger should charge the battery in 4 hours to obtain the maximum
playback time. If you are using two batteries, both batteries should be fully charged in 8 hours.
How to charge
the battery
To charge your player’s battery, you should:
1. Insert the uncharged battery as shown in “Inserting the battery” on page 2-2.
2. Connect your player to an AC power outlet as shown in “Powering your player” on page 2-3.
Your player will turn itself on.
Check the battery icon to see when the battery is fully charged.
Remember to use only the
accessories packaged for
you. Substitute accessories
may damage your player,
or worse yet, hurt you.
Figure 2-2: Powering your NOMAD Jukebox 3