User`s guide

Troubleshooting B-2
The camera’s Power LED does not light
up, or in Windows 98/98 SE, Me and
2000, the computer restarts for no
apparent reason.
You may have USB devices drawing too
much power from your computer. This
can happen especially when connecting
USB devices to a passive or self-
powered USB hub. In Windows XP, a
dialog box similar to Figure B-1
appears.
Do the following:
❑ Connect the camera directly to your
computer’s USB port.
❑ Use a USB hub with an external power
supply.
Insufficient system resources reserved for the USB port, causing the
system to be unable to function.
There are too many devices in the system, causing IRQ problems with the
system’s USB controller.
Do the following:
1. Remove some devices from the system.
2. Restart the system.
The system will rearrange the resources automatically.
Figure B-1: USB Hub Power Exceeded
dialog box