Specifications

Installing Hardware 1-7

Step 3: Connect to

audio cable

(Optional step for

Analog or Digital

CD audio cable

connection)

For analog CD audio output:

connect the Analog CD audio cable from the Analog Audio connector on your CD-

ROM/DVD-ROM drive to the CD_IN connector on the Sound Blaster Audigy card

as shown in Figure 1-6.

For digital CD audio output:

connect the Digital CD audio cable from the Digital Audio connector on your CD-

ROM/DVD-ROM drive to the CD_SPDIF connector on the Sound Blaster Audigy

card as shown in Figure 1-6.

• The MPC-to-MPC (4-pin)

Analog CD audio cable

and the MPC-to-MPC (2-

pin) Digital CD audio

cable are not included

with your audio card.

• If the Sound Blaster

Audigy card is connected

to both the CD SPDIF and

CD Audio connectors on a

CD-ROM or DVD-ROM

drive, do not enable the

CD Audio and CD Digital

options at the same time

in Surround Mixer.

Figure 1-6: Connecting the drives.

CD-ROM/DVD-ROM drive

Sound Blaster Audigy (SB1394) Sound Blaster Audigy (non-SB1394)