Introduction Congratulations on your purchase of Sound Blaster ® E5! This portable headphone amplifier and USB DAC (Digital-to-Analog Converter) features powerful noise reduction microphones that record clean, high quality audio directly to smart devices or PCs and Macs. The built-in powerful SB-Axx1™ sound and voice processor with SBX ® Pro Studio™ technology was designed to perfectly deliver our legendary microphone reverb engine and produce an amazing cinematic audio playback experience.
Registering Your Product Registering your product ensures you receive the most appropriate service and product support available. You can register your product during installation or at register.creative.com. Please note that your warranty rights are not dependent on registration. More Help For the latest news and products for the Sound Blaster, please visit www.soundblaster.com. The site also includes information on making purchases, technical help and the latest software updates.
About Your Hardware The Sound Blaster E5 has input and output jacks to enable connection to various devices while controls on the side give you basic control over your audio device. CAUTION: Do not store the device in high temperatures or leave the device in a car exposed to direct sunlight for a long period of time. High temperatures may damage the device or battery.
Controls & Indicators 3 3 4 5 6 Control / Indicator Description Power / Bluetooth button and indicator Power / Bluetooth button l Power ON – Press and hold 1 sec l Bluetooth pairing – Press and hold 2 sec l Power OFF – Press and hold 4 sec l Turn ON/OFF charging via Micro-USB - Double-press Indicator l White: Power ON l Blue (blinking): Bluetooth discovery/pairing mode l Blue: Bluetooth connected l Off: Power OFF l White (blinking): Charging via Micro-USB is disabled 4 SBX / Call button and indic
Control / Indicator Description l l current battery level. Flashing: Battery is charging. The flashing LED shows the charge level. Off: Power OFF. Input / Output Jacks Top 7 8 Bottom 7 9 10 11 12 Jack / Control Description 7 Headphone jacks Connects to stereo headphones with a 3.50 mm (1/8inch) plug. 8 Volume control knob Adjusts the audio output volume.
Jack / Control Description recording. OR Alternatively, you may connect it to the power socket via a USB power adapter (DC 5V, 1A) to charge it.
Setting Up Your Audio Device Step 1: Charging your Sound Blaster E5 Connect your Sound Blaster E5 directly to a USB port on your computer. You can also connect to a wall outlet using USB power adapter* (not included). * DC 5V, 1 A Charge your Sound Blaster E5 for approximately 4 to 5 hours. It is recommended that you charge it for at least 8 hours before it is used for the first time. Note: Lithium-ion battery life may suffer when it is constantly fully depleted or overexerted at low voltage.
Step 2: Turning On Sound Blaster E5 Press the Power / Bluetooth button to turn on Sound Blaster E5. l Power On – Press and hold 1 sec l Bluetooth pairing – Press and hold 2 sec l Power Off – Press and hold 4 sec Battery level indication In On mode, the three white LEDs light up according to the battery level of your Sound Blaster E5. Low Full When charging during Off mode, the LEDs will light up according to the battery level, and the flashing LED shows the charge level.
Step 3: Connecting to an Audio Source One-touch pairing with NFC You may pair your NFC-enabled devices (such as Bluetooth mobile devices) with the Sound Blaster E5 with a single tap using NFC technology. Simply follow these steps to connect them. Action 1 Turn ON the NFC feature on your device. And touch your device on the NFC logo on Sound Blaster E5. If prompted "Are you sure you want to pair the Bluetooth device?", tap "Yes". LED Status Device Status Bluetooth indicator lights up in blue.
Manual Bluetooth pairing To enjoy your favorite music from your Bluetooth devices, simply follow these steps to connect them. Action LED Status Device Status 1 Press and hold Power / Bluetooth button for 2 seconds. Bluetooth indicator blinks in blue. Pairing mode. Ready to be paired with new device. 2 Turn ON the Bluetooth feature on your device. Search and select "Sound Blaster E5". If password is required, enter 0000 and connect to it. Bluetooth indicator lights up in blue.
Connecting to a computer via USB (a) (b) (c) (a) Micro-USB cable (b) Desktop (c) Laptop Note: Connecting the Sound Blaster E5 to a USB hub is not recommended. Setting the Sound Blaster E5 as the default audio device For Windows 1. Go to Control Panel and click Sound. 2. Click the Playback tab, select Sound Blaster E5, then click the Set Default button. 3. Click the Recording tab, select the required Sound Blaster E5 recording device, then click the Set Default button. For Mac 1.
Connecting to a mobile device via USB Host (a) (c) (b) (a) USB cable (not included) (b) Smartphone (c) Tablet Sound Blaster E5 – Setting Up Your Audio Device 13
Connecting to line-in sources (e.g. MP3 player, CD player) (a) (b) (c) (d) (e) (a) 3.
Connecting to optical-in sources (e.g.
Connecting to the PlayStation® 4 via USB (a) (b) (a) Micro-USB cable (b) PS4™ game console Sound Blaster E5 – Setting Up Your Audio Device 16
Step 4: Connecting to Headphones / Microphones / Speakers Connecting to headphones CAUTION: Set the appropriate gain level (L or H) before connecting your headphones to the Headphone jack to prevent damaging your headphones. Low: For headphones with low impedance (16 ~ 120 ohms). Gain: up to 5 dB. High: For headphones with high impedance (120 ~ 600 ohms). Gain: up to 15 dB.
Connecting to microphones For Windows 1. Go to Control Panel and click Sound. 2. Click the Recording tab, select Sound Blaster E5 (External Mic), then click the Set Default button. For Mac 1. Go to System Preferences and click Sound. 2. Click the Input tab, then select Sound Blaster E5 (External Mic). Note: You can only use one external microphone at a time.
Connecting to speakers (c) (a) BASS TREBLE VOLUME OFF MAX AUX IN (b) (d) (a) 3.5 mm 2-channel audio cable (available separately) (b) Analog speakers (c) Mini-TOSLINK cable (d) Digital speakers Note: Line Out audio is muted if a device is connected to the Headphone jacks.
Installing and Uninstalling Software To take full advantage of your Sound Blaster E5 audio device, you need to install device drivers and applications. At times, you may also need to uninstall some or all of the device drivers and applications to correct problems, change configurations, or upgrade outdated drivers or applications.
Uninstalling Drivers and Applications In the event that an uninstallation is required (such as for upgrades), please follow the following procedure. Before you begin, close all running audio applications. Applications that are still running during uninstallation will not be removed. For Windows OS 1. From the Control Panel, click Uninstall a program. 2. Select Sound Blaster E5. 3. Click the Uninstall button or option. If the User Account Control dialog box appears, click the Continue button. 4.
Installing the Mobile App Sound Blaster Central (for iOS and Android) Sound Blaster E5 comes with an amazing app, Sound Blaster Central, that supports both iOS and Android OS, so you can customize your audio – you now have total control right from the palm of your hand. Download Sound Blaster Central from the Apple App Store or Google Play Store.
Using Your Audio Device Step 1: Adjusting the volume WARNING: l l Set the volume control at minimum level before connecting headphones or speakers. Do not listen to audio at high volumes for prolonged periods of time to avoid impairing your hearing. Adjust the volume to a comfortable level using the volume control.
Step 2: Using your Sound Blaster E5 Your Sound Blaster E5 works seamlessly with many external devices to perform different tasks: l Playing audio l Recording audio l Answering calls Note: Line Out audio is muted if a device is connected to the Headphone jacks.
Playing audio from a computer via USB OR BASS TREBLE VOLUME OFF MAX AUX IN Note: Enhance audio playback with SBX Pro Studio enhancements such as immersion control, dynamic range restoration, low-frequency boost, dialog boost, and automatic volume levelling. See Using the Creative Software Suite – SBX Pro Studio Settings.
Playing audio from a mobile device via USB Host OR BASS TREBLE VOLUME OFF MAX AUX IN Sound Blaster E5 – Using Your Audio Device 26
Playing audio from a line-in/optical-in device OR BASS TREBLE VOLUME OFF MAX AUX IN Sound Blaster E5 – Using Your Audio Device 27
Recording audio to an iOS mobile device You can record audio to your iOS mobile device using the built-in microphones of the Sound Blaster E5, or an external microphone connected to the Sound Blaster E5. Use a voice recording application on your mobile device to record audio. Microphone array orientation The built-in stereo microphones with horizontal or vertical orientation sensor creates a beamforming microphone array that works together with CrystalVoice technology to ensure crystal clear recording.
Recording audio to a computer Easily record audio on your computer with the built-in microphones of the Sound Blaster E5, or an external microphone connected to the Sound Blaster E5. Use a voice recording application on your computer to record audio. Note: The built-in microphones will be disabled automatically when an external microphone is connected.
Recording line-level audio to a mobile device or computer You can record audio from a line-in source (game console, DVD player, TV set) and store them in your mobile or computer via the Sound Blaster E5. OR Note: Signal levels can be adjusted using the Sound Blaster E-Series Control Panel. See Using the Creative Software Suite.
Recording "What U Hear" (For Windows OS) The Sound Blaster E5 is equipped with What U Hear feature that allows you to record what is being played on the speakers/headphones as it is. Thus, you can also record voice conversations held over instant messaging tools such as Google Talk, Skype etc. 1. Go to Control Panel and click Sound. 2. Click the Recording tab, select Sound Blaster E5 (What U Hear), then click the Set Default button. 3. Play music on your connected device or activate your voice conversation.
Answering calls Mobile communication When there's an incoming call, the call takes precedence over audio playback – playback stops and the ringtone will be heard. Press the SBX button once to answer the call. Press again to end the call. The music will resume after the call has ended. Desktop communication Use the Sound Blaster E5 to enjoy outstanding acoustic performance in popular VoIP applications like Ventrilo®and TeamSpeak®.
Using the Creative Software Suite A software suite for the Sound Blaster E5 is developed to provide additional enhancements to the audio and voice inputs and outputs of the product.
Sound Blaster E-Series Control Panel Configuring Your Software Settings Click each feature to access its settings page. More information on each feature can be found in thei respective sections in this manual.
SBX Pro Studio Settings Enhancing Your Listening Experience You can adjust the amount to apply for each enhancement by dragging its slider left to decrease or right to increase. To test the effects of the audio enhancements, click l l l l l and listen to the demo video. SBX Pro Studio Surround provides immersion control of sounds not just around you, but also above and below for a full 3D audio experience.
CrystalVoice Settings Having Fun with CrystalVoice You can adjust the amount to apply for each enhancement by dragging its slider left to decrease or right to increase. To test the effects of the audio enhancements, click microphone. l l l l l l and speak into your CrystalVoice FX enables the speaker's voice to be altered with a variety of effects, which can be used to enhance the tone of the speaker's voice, create interesting accents or to sound like a completely different person.
Scout Mode Scout Mode delivers audio realism that enables you to hear your opponents from further away, giving you a distinct tactical advantage in combat. 1. Scout Mode Select to turn on or off Scout Mode. 2. Click to configure hotkeys for turning on and turning off Scout Mode.
Speakers/Headphones Settings 1. Speakers / Headphones Configuration Shows your current physical speakers or headphones configuration. 2. Testing your audio playback Click to hear a sample audio clip being played back through your setup. Note: Direct Mode is an option for direct playback to stereo speaker channel sampled at 192kHz. Direct Mode will remain on until the device is power off.
Mixer Settings 1. Volume sliders Under Playback, adjust your playback and monitoring volumes, or to mute/unmute them. Under Recording, adjust your recording volumes or to mute/unmute them. 2. Mixer settings Click the icon to mute/unmute the input/output. You can click the icon to adjust more settings for your input/output.
Equalizer Settings 1. EQ presets Select an equalizer preset to apply to your audio. 2. EQ sliders Adjust the equalizer settings. Customizing Your EQ Settings Select the EQ checkbox to enable this feature, then click the EQ drop-down arrow and select a preset from the list. Selecting a preset will move the EQ sliders to the appropriate values. You can then adjust the equalizer setting by dragging the sliders up or down to the desired level. Click configuration as a new preset.
General Specifications Inputs l One 3.5 mm (1/8") line-in/mic-in/optical-in jack l Built-in stereo microphones Outputs l Two 3.5 mm (1/8") headphones jack l One 3.
Troubleshooting and Support This section provides solutions to problems you may encounter during installation or normal use. This includes: l Problems with Sound l Problems with Audio Streaming via USB Host l Problems with Simultaneous Playback/Recording l Tips to Improve Your Recording Quality l Restore Default Settings Problems with Sound No sound from the headphones. Check the following: l The headphones are connected to the Headphone jack. l Ensure the Sound Blaster E5 is turned on.
Problems with Audio Streaming via USB Host The Sound Blaster E5 automatically powers off during audio streaming. When a supported Android device is connected to the Sound Blaster E5 via the USB Host port, the Sound Blaster E5 will attempt to charge the device. As a result, battery power consumption of the Sound Blaster E5 increases. When the battery level drops to the minimum, the Sound Blaster E5 automatically powers off to conserve battery power. Do the following: i. Disconnect the Android device. ii.
Safety Information Refer to the following information to use your product safely, and to reduce the chance of electric shock, short-circuiting, damage, fire, hearing impairment or other hazards. Improper handling may void the warranty for your product. For more information, read the warranty available with your product. l Do not dismantle or attempt to repair your product. Refer all servicing to authorized repair agents.
Wireless Product l l l The short wave radio frequency signals of a wireless device may impair the operation of other electronic and medical devices. Switch off the device where it is prohibited. Do not use the device in medical facilities, aircraft, refueling points, close to automatic doors, automatic fire alarms or other automatically controlled devices. Keep this device at least 20 cm from pacemakers and other medical devices.
IMPORTANT — A LIRE AVEC ATTENTION Ecouter de manière prolongée, à un très haut volume sonore de la musique (au dessus de 80 decibels), aumoyen d'un casque ou d'écouteurs, peut entraîner une détérioration irreversible et définitive de vos facultés auditives. L’usage répété et habituel d’un casque ou d’écouteurs à un niveau de volume sonoretrop élevé peut donner l'impression à l'utilisateur que le volume sonore émis par l’appareil n'est pas suffisant.
Safe Removal of Built-in Battery This product contains an integrated battery which should ONLY be removed by service centers or recycling facilities with reference to the instructions herein. Creative and its affiliates will not be liable for any damages resulting from attempting to remove and/or tampering with the battery or any part of the product by an end user.
Démontage sécurisé de la batterie intégrée Ce produit contient une batterie intégrée qui ne devrait être démontée que par des centres de services ou des installations de recyclage en référence aux instructions indiquées dans ce document. Creative et ses sociétés affiliées ne seront pas responsables de tout dommage résultant de votre essai de démonter et / ou altérer la batterie ou une partie du produit par un utilisateur final.
Sicherer Ausbau des integrierten Akkus Dieses Produkt enthält einen integrierten Akku, der NUR durch Service-Center oder Recycling-Stellen unter Befolgung der hier enthaltenen Anleitung entfernt werden darf. Creative und dessen Partner haften nicht für eventuelle Schäden, die aus dem Versuch entstehen, den Akku oder beliebige andere Teile des Produkts auszubauen oder zu manipulieren.
Veilige verwijdering van ingebouwde batterij Dit product bevat een ingebouwde batterij en mag alleen worden verwijderd door servicecentra of recyclingfaciliteiten met verwijzing naar de hieronder beschreven aanwijzingen. Creatieve en haar gelieerde bedrijven zijn niet aansprakelijk voor schade die veroorzaakt wordt door het verwijderen en/of modificeren van de batterij of een deel van het product door een eindgebruiker.
Sikker fjernelse af indbygget batteri Dette produkt indeholder et indbygget batteri, som KUN må fjernes af servicecentre eller genbrugsanlæg, i overensstemmelse med de medfølgende vejledninger. Creative og dets associerede selskaber, kan ikke holdes ansvarlige for skader forårsaget af forsøg på at fjerne og/eller ændre batteriet, eller nogle andre dele af produktet, på vegne af en slutbruger.
Sikker fjerning av innebygd batteri Dette produktet har et integrert batteri som KUN skal fjernes av servicesentre eller gjenbruksanlegg med referanse til instruksjonene heri. Creative og deres samarbeidspartnere vil ikke være ansvarlige for noen skader oppstått ut fra forsøk på å fjerne og/eller tukle med batteriet eller noen del av produktet av en sluttbruker.
Ασφαλής αφαίρεση της ενσωματωμένης μπαταρίας Αυτό το προϊόν περιέχει ενσωματωμένη μπαταρία η οποία πρέπει να αφαιρείται ΜΟΝΟ από εξειδικευμένα κέντρα ή εγκαταστάσεις ανακύκλωσης με καθοδήγηση από τις παρούσες οδηγίες. Η Creative και οι συνεργάτες της δε φέρουν καμία ευθύνη για φθορές λόγω απόπειρας αφαίρεσης της μπαταρίας ή άλλου εξαρτήματος του προϊόντος από τον τελικό χρήστη.
Bezpečné vyjmutí zabudované baterie Produkt obsahuje integrovanou baterii, kterou mohou vyjímat POUZE pracovníci servisních center nebo recyklačních zařízení dle zde uvedených pokynů. Společnost Creative a její přidružené společnosti nebudou odpovídat za žádné škody vyvstávající z nedovolené manipulace nebo pokusu o vyjmutí baterie či jakékoli součásti produktu koncovým uživatelem. UPOZORNĚNÍ: l l Než se pokusíte vyjmout baterii, ujistěte se, že je produkt odpojen od napájecího kabelu.
Az elem biztonságos eltávolítása Ez a termék elemet is tartalmaz, amelyet azonban CSAK szervizekben vagy újrahasznosító telepeken távolíthatnak el a készülékből az erre vonatkozó utasítások betartása mellett. A Creative vállalat és annak leányvállalatai nem tehetőek felelőssé semminemű olyan kárért, amelyet egy végfelhasználó okozott az elem vagy a termék bármely részének eltávolításával és/vagy megrongálásával.
Безопасное извлечение встроенной аккумуляторной батареи Настоящий продукт содержит встроенную аккумуляторную батарею, которую разрешается извлечь ТОЛЬКО в сервисном центре или на объекте по утилизации с соблюдением приведенных в настоящем документе инструкций. Компания Creative и ее дочерние компании не несут ответственности за любые повреждения, нанесенные в результате попытки извлечения и/или нарушения целостности аккумуляторной батареи или любой части изделия конечным пользователем.
Regulatory Information Notice for the USA Federal Communication Commission (FCC) Interference Statement FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Notice for Canada This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Cet appareil numérique de classe B est conforme aux normes canadiennes NMB-003 et CNR-210. This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesirable operation.
DECLARATION OF CONFORMITY According to the FCC96 208 and ET95-19 Manufacturer/Importer’s Name: Creative Labs, Inc. Manufacturer/Importer’s Address: 1901 McCarthy Boulevard Milpitas, CA. 95035 Tel: (408) 428-6600 declares under its sole responsibility that the product Trade Name: Creative Model Numbers: SB1590 has been tested according to the FCC / CISPR22 requirement for Class B devices and found compliant with the following standards: EMI/EMC: ANSI C63.
European Compliance This product conforms to the following: EMC Directive. RoHS Directive. Mains operated products for the European market comply with Low Voltage Directive and Commission Regulation(s) Implementing Directive. Communication/RF wireless products for the European market comply with R&TTE Directive. CAUTION: To comply with the Europe CE requirement, this device must be installed with CE certified computer equipment which meet with Class B limits.
Conformità alle normative europee Questo prodotto è conforme alla seguente normativa: Direttiva EMC. Direttiva RoHS. I prodotti che funzionano con corrente di rete per il mercato europeo sono conformi alla direttiva bassa tensione e alla direttiva di implementazione nelle normative europee. I prodotti di comunicazione/wireless RF per il mercato europeo sono conformi alla Direttiva R&TTE.
Homologación para Europa Este producto cumple: la Directiva de compatibilidad electromagnética. Directiva RoHS. Los productos funcionando con corriente electrica cumplen con la Directiva de baja tensión y con la implementación de los requisitos de la Comisión para la directiva. Los productos inalámbricos de comunicación o frecuencias de radio para el mercado europeo cumplen la Directiva de equipos de radio y terminales de telecomunicaciones.
Conformidade Europeia Este produto está em conformidade com a seguinte regulamentação: Directiva EMC. Directiva RoHS. Os produtos com ligação à rede destinados ao mercado europeu estão em conformidade com a directiva de baixa voltagem. Directiva de Implementação do(s) Regulamento(s) da Comissão. Os produtos de comunicação/radiofrequência sem fios destinados ao mercado europeu estão em conformidade com a directiva R&TTE.
Europeisk samsvar Dette produktet er i samsvar med følgende: EMC-direktivet. RoHS-Direktivet. Elektriske produkter til det europeiske markedet er i samsvar med Lavspenningsdirektivet og Økodesigndirektivet. Kommunikasjon/RF trådløse produkter til det europeiske markedet er i samsvar med R&TTE-direktivet. ADVARSEL: For å overholde det europeiske CE-kravet må denne enheten installeres med CE-sertifisert datautstyr som tilfredsstiller klasse B-grensene.
Eurooppalainen yhdenmukaisuus Tämä tuote täyttää seuraavat tuotemääritykset: TEMC-direktiivin. RoHS-direktiivin. Euroopan markkinoiden verkkovirtaa käyttävät tuotteet ovat matalajännitedirektiivin mukaisia. Euroopan parlamentin ja neuvoston ohjaava direktiivi. Euroopan markkinoiden tietoliikenne- ja langattomat radiotaajuustuotteet noudattavat R&TTEdirektiiviä.
Zgodność z przepisami europejskimi Urządzenie jest zgodne z dyrektywą EMC. Dyrektywa RoHS. Urządzenia zasilane z sieci elektrycznej przeznaczone na rynek europejski muszą być zgodne z dyrektywą dotyczącą urządzeń niskonapięciowych oraz z dyrektywą wdrażającą komisji regulacyjnej. Urządzenia komunikacyjne / bezprzewodowe wykorzystujące transmisję radiową przeznaczone na rynek europejski spełniają warunki dyrektywy RTTE.
Európai megfelelőség Ez a termék megfelel a következőknek: Az elektromágneses összeférhetőségre. RoHS. Az Európa területére szánt hálózati termékek megfelelnek az alacsony feszültségre vonatkozó irányelvnek. Az irányelvet végrehajtó bizottsági rendeletek. Az Európa területére szánt, távközlési, illetve rádiófrekvenciás vezeték nélküli termékek megfelelnek a rádióés távközlő végberendezésekre vonatkozó irányelvnek.
Europos Sąjungos atitiktis Šis gaminys atitinka šiuos reikalavimus: „Elektromagnetinės atitikties“ („EMC“) direktyva. RoHS direktyva. Produktai, kurie veikia maitinami iš elektros tinklo, skirti Europos rinkai, atitinka Žemos įtampos direktyvą. Komisijos reglamentas(-ai) dėl Direktyvos įgyvendinimo. Europos Sąjungos rinkai skirti ryšių / radijo dažnių bevieliai gaminiai atitinka 1999/5/EB direktyvą „Dėl radijo ryšio įrenginių ir telekomunikacijų galinių įrenginių bei abipusio jų atitikties pripažinimo“.
Avrupa Uyumu Bu ürün aşağıdakilere uygundur: EMC (Elektromanyetik Uyumluluk) Yönetmeliği. RoHS (Tehlikeli Maddelerin Kısıtlanması) Yönetmeliği Avrupa piyasasına yönelik, elektrik şebekesi tarafından çalıştırılan ürünler Alçak Gerilim Yönetmeliği (LVD) ve Enerji ile İlgili Ürünlerin Çevreye Duyarlı Tasarımına İlişkin Yönetmeliğe uygundur. Avrupa piyasasına yönelik İletişim / RF kablosuz ürünleri R ve TTE Yönetmeliği ile uyumludur.
Ukraine RoHS Statement Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні, затвердженого постановою Кабінету Міністрів України від 3 грудня 2008 № 1057 Notice for Japan 充電式電池のリサイクル 充電式リチウム電池はリサイクル可能な資源です。 l Creative製品に埋め込まれている充電式リチウム電池をリサイクルするために、本体から電池を取り外さないで ください。リサイクルに関する情報および指示については、 Creative Media K Kカスタマーサポート http://jp.creative.
Vietnam RoHS Statement This product is in compliance with Circular 30/2011/TTBCT of the Ministry of Trade of the Socialist Republic of Vietnam (“Circular”), it does not contain the following substances in concentration greater than the Maximum Limit value as specified in the Circular.
License and Copyright Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of Creative Technology Ltd. © 2015 Creative Technology Ltd. All rights reserved.