Operation Manual

Troubleshooting and Support
This section provides solutions to problems you may encounter during installation or normal use. This
includes:
l Problems with Sound
l Problems with Audio Streaming via USB Host
l Problems with Simultaneous Playback/Recording
l Tips to Improve Your Recording Quality
l Restore Default Settings
Problems with Sound
No sound from the headphones.
Check the following:
l The headphones are connected to the Headphone jack.
l Ensure the Sound Blaster E5 is turned on.
l Ensure the volume control of the Sound Blaster E5 is not at minimum level.
l Ensure the volume on your connected device or the media player is not muted.
No audio output when playing digital files such as WAV, MIDI files or AVI clips.
Check the following:
l The volume control is set at mid-range. Adjust the volume mixer settings in Sound Blaster E-Series
Control Panel, if necessary.
l The powered speakers or external amplifier are connected to the Line Out jack.
No audio can be recorded from the built-in microphone.
Do the following:
i. Navigate to Windows Control Panel > Sound > Recording tab.
ii. Select Sound Blaster E5 (Internal Mic) as the default recording device.
iii. In the Mixer selection of Sound Blaster E-Series Control Panel, unmute the Internal Mic in the
Recording section.
No audio can be recorded from the source connected to Line In/Mic In jack.
Do the following:
i. Navigate to Windows Control Panel > Sound > Recording tab.
ii. Select Sound Blaster E5 (Aux In or External Mic) as the default recording device.
iii. In the Mixer selection of Sound Blaster E-Series Control Panel, unmute the Aux In or External
Mic in the Recording section.
Sound Blaster E5 – Troubleshooting and Support 42