Operation Manual

Troubleshooting B-4
For Windows 2000 and Windows XP users:
1. Click
Start
->
Settings
->
Control Panel
.
2. In the
Control Panel
dialog box, double-click the
System
icon.
3. In the
System Properties
dialog box, click the
Hardware
tab.
4. Click the
Device Manager
button.
5. Double-click the
ATA/ATAPI IDE Controllers
icon.
Your
IDE channels
will appear.
6. If your storage device is connected to the primary IDE channel, right-click the
Primary IDE Channel
icon.
If your storage device is connected to the secondary IDE channel, right-click the
Secondary IDE Channel
icon.
7. Click
Properties
.
8. In the
Properties
dialog box, click the
Advanced Settings
tab.
9. Click the
Use DMA if available
check box, to select it.
10.Click the
OK
button.
No audio output when playing audio CDs.
Sound Blaster does not support analog CD audio playback. To listen to audio CDs,
digital CD playback must be enabled. Do the following to enable digital CD playback:
For Windows 98 SE users:
1. Click
Start
->
Settings
->
Control Panel
.
2. In the
Control Panel
dialog box, double-click the
Multimedia
icon.
3. In the
Multimedia Properties
dialog box, click the
CD Music
tab.
4. Click the
Enable digital CD audio for this CD-ROM device
check box to select
it.
5. Click the
OK
button.
In Windows 2000, Service
Pack 3 may be necessary for
full and correct functionality.
In Windows XP, Service Pack
1 may be necessary for full
and correct functionality.
Digital CD Playback may not
be available on external
DVD/CD-ROM drives with
PCMCIA IDE controllers.