Technology Home Security System User Manual

Using Your Wireless Features 13
For Sound Blaster Wireless Transmitter
1 In Sound Blaster Wireless Control Panel, click the Zone button, and then
click the zones assigned to the receivers you want to activate or deactivate.
2 Clicking the Zone button will put the activated zones/receivers on
standby.
3 Click the Zone button again to activate the previously selected zones/
receivers.
For Sound Blaster X-Fi Notebook
1 In Entertainment Mode, click the Zone button, and then click the zone
number buttons (1 to 4) assigned to the receivers you want to activate or
deactivate.
2 Click the Enable Wireless Music Control check box to deselect it. Activated
receivers will then be on standby.
3 Click the Enable Wireless Music Control check box again to select it.
Previously selected receivers will be activated.
NOTE
Your transmitter can only save and reactivate one combination of
receivers. It remembers the last combination of activated
receivers just before the Zone button is clicked.