Specifications
Table Of Contents
- Coverpage
- Safety Instructions
- Revision History
- Contents
- Introduction
- 1 Outline
- 2 Explanation of Functions
- 3 Q-PLC Multi-CPU
- 4 Q Motion CPU
- 5 SFC Program
- 6 SV22 Servo Programs
- 6.1 Servo program
- 6.1.1 Servo program configuration
- 6.1.2 List of servo commands
- 6.1.3 Linear control
- 6.1.4 Circular interpolation control using auxiliary point designation
- 6.1.5 Circular interpolation control using radius designation
- 6.1.6 Circular interpolation control using center point designation
- 6.1.7 Fixed-dimension feed control
- 6.1.8 Speed control
- 6.1.9 Speed/position changeover control
- 6.1.10 Speed changeover control
- 6.1.11 Constant-speed control
- 6.1.12 Repeated control (for speed changeover control and uniform speed control)
- 6.1.13 Simultaneous start
- 6.1.14 Zero point return
- 6.1.15 Position follow-up control
- 6.1.16 High-speed oscillation control
- 6.1.17 Helical interpolation control with auxiliary point designated
- 6.1.18 Helical interpolation control with radius designated
- 6.1.19 Helical interpolation control with center point designated
- 6.1.20 Current value change
- 6.1 Servo program
- 7 Operation Control Program
- 8 Windows Personal Computer Operations
- 9 Basic Practice Using the SV22 Real Mode
- 10 Applied Practice with SV22 Real Mode
- 10.1 Details of practice
- 10.2 Q172CPU practice machine system configuration
- 10.3 Practice SFC programs
- 10.4 Writing to the motion CPU
- 10.5 Program for operation
- 10.5.1 JOG operation
- 10.5.2 Main routine SFC program (real mode operation)
- 10.5.3 Execution of servo program (motion control step)
- 10.5.4 Stopping
- 10.5.5 Error reset
- 10.5.6 Current value change
- 10.5.7 Speed change (CHGV)
- 10.5.8 Reading actual current value
- 10.5.9 Continuous positioning
- 10.5.10 M code function
- 10.5.11 Indirect setting of servo program address
- 10.6 Operating the practice machine
- 11 Practicing with the SV22 Virtual Mode
- 11.1 Mechanism program
- 11.2 Details of practice
- 11.3 Starting up SW3RN-CAMP and creating the cam
- 11.4 SFC program for virtual mode
- 11.5 Editing the mechanism
- 11.6 Writing to the motion CPU
- 11.7 Reading of sequence program from Q-PLC CPU
- 11.8 SFC program for practice
- 11.9 Practice machine operations
- 11.10 Exercise (Roller setting)
- Appendix
1 - 4
1.2 Outline of control
1.2.1 Real mode control for SV13 transfer assembly and SV22 automatic machine
(a) A system containing a servomotor is directly controlled with the servo program.
(b) The positioning parameters must be set, and the servo program and positioning
sequence program must be created.
(c) The procedures for positioning control are indicated below.
1) Start up of the motion SFC program is requested with the sequence
program's SFCS command
2) Positioning control is carried out with the designated motion SFC program
3) The servomotor is controlled
Servo amplifier
Servomotor
Sequence program
Motion SFC program
Transfer
[K10: Real
1 INC-2
Axis 1, 10000 PLS
Axis 2, 20000 PLS
Composite speed 30000 PLS/sec
[G100]
M2049//Accept servo ON?
END
K0
.........
Motion SFC
program start
request
command
Start program No. designation
1)
3)
2)
Q-PLC CPU
Q motion CPU
* The motion SFC program can also be started
automatically with parameter settings.
SP.SFCS
Servo program
Parameters for positioning
SYSTEM SETTING
FIXED PARA
SERVO PARA
P.B. DATA
ZERO P. DATA
JOG DATA
LMT. SW. DATA
.........