Specifications

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
19
CROSS series mixed matrix switch User 's Manual
CROSS Series Mixed Matrix Switcher User 's Manual
3.2.1 Switching Operation Example
Example: synchronously switch the first channel
audio and video, and RS-232 and IR control
signals to the output channels of no.3, no.4
channel
The steps are as follows:
1, Press switching mode "V / RS” button, lamp is
lit.
2. Press input channel "1" key, the key lamp is
lit.
3 Press output channels "3,4" keys, the key lamps
are lit. Key light "ENTER" has been in a flashing
state, suggest whether to confirm the
operation.
4.Press the command key "ENTER" to perform
operations, all the lit key lamps are closed. At the
same time, output device will display
corresponding information to indicate that
operation was successful.
The operation methods of button "VIDEO" and
"RS" are as described above, no longer elaborate
here.
3.2.2 Save and Call Operation Example
Example: synchronously input the audio and
video, and RS-232 and IR control signal of the
current 1st channel, the 3rd and 4th output
channels are saved as No. 6, and call.
The steps are as follows:
1.Press the "SAVE" button, the button lamp is lit.
2.Press input channels key "6" , key lamp is lit,
indicating the operation is successful, the current
input, the output state is saved to the 6th storage
unit
3.Press the "RECALL" button, the button lamp is
lit.
4.Press the input channel key "6", key lamp is lit,
call up the input and output state of the 6th
storage unit.
3.3 “Matrix Net Tool” Software
Description
"Matrix Net Tool" matrix control software is used
with CAT-5 digital matrix switcher to set the
network parameters of the matrix.
3.3.1 Software Running Environment
Window98/2000/NT/XP/Vista/Win7 operating
system
32M or more memory
10M or more hard disk space
CD-ROM
At least one serial communication port