Specifications

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
20
CROSS series mixed matrix switch User 's Manual
CROSS Series Mixed Matrix Switcher User 's Manual
3.3.2 Software Startup
Turn off the matrix and computer power. The
matrix RS-232 interface and the computer's
RS-232 communication port are connected with a
randomly distributed communication line;
Power on matrix and computer; run the Matrix Net
Tool Setup.exe of randomly distributed CD-ROM
on the control computer, after installation, you can
enter the control software interface.
3.3.3 Open Program
The "Start” on the left bottom of windows →
Programs → Matrix Net Tool → the Matrix Net
Tool to enter the main program screen.
3.3.4 The Main Interface
The main interface of "Matrix Net Tool" is shown
in Figure 2-1.
Right-click an empty space in the main interface,
then pop-up
"Set Com Port" window, shown in Figure 2-2, you
can choose different computers COM ports to
communicate with matrix.
Can set network port, IP address, subnet mask,
gateway and MAC address of matrix through the
main interface.
"Current Settings" reads the current network port
parameters of the matrix; “Default Settings "to
restore the matrix network port parameters to the
factory defaults. The factory default value is as
follows:
Port number: 5000
IP address: 192.168.0.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
Hardware address: 0x00: 0x11: 0x22: 0x33: 0x44:
0x55
Figure 2-1
Figure 2-2
3.4 Remote Control Description
3.4.1 Functionality
Realize remote control in the Ethernet
environment, namely, remote client control local
matrix device via the Internet.
Local matrix devices and remote clients in
the following description will be respectively
represented by server and client.
3.4.2 System components
1. Controlled device (matrix controller)
2. Network switcher or router
3. Internet accessible PC
4. Straight-through cable
These system components merely refer to