Specifications

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
21
CROSS series mixed matrix switch User 's Manual
CROSS Series Mixed Matrix Switcher User 's Manual
system installation equipment needed by server
(matrix controller), the client simply need a
computer which can access the Internet.
3.4.3 Connection Diagram
System Connection is simple. Connect interface
one-to-one, as shown in the following diagram:
Figure 2-3
3.4.4 Instructions
The following instructions will choose "TP-link"
router as an example to illustrate, as follows:
3.4.4.1 Mapping Setup
A. After connecting system, open the IE browser,
enter the IP address of TP-link and enter into the
TP-link setup page. If the access is
password-protected, enter the default user name:
admin, password admin to enter.
For the first time into the TP-link setup interface, it
default display the status of the TP-link
information, see Figure 2-4 below.
Remote control system, TP-link routers only do
port mapping settings, i.e. forwarding rules
(common routers have this feature).
Figure 2-4
B. Select “forwarding rules "option on the left
column of TP-link setting page, click on the"
virtual server”, and enter mapping settings page,
as shown in Figure 2-5, this set operated as
follows:
Click adding a new entry→fill the service port
number, IP address, protocol, state→ save and
exit, the setup is complete.
Service port number is the port number of the
controlled device (matrix controller); IP address is
the IP address of the controlled device (matrix
controller);
Agreement can choose ALL or TCP protocol;
state effective.
Figure 2-5