Product Info

ManualsBrandsCREE Lighting ManualsElectronics802.15.4/BLE Radio module

Application Note

LPS2238, Rev C

August 2019

SmartCast

Wireless Integration Module

Available Part Numbers

Part Number

Description

WIM-CMA-OEM SmartCast Wireless Integration Module

WIM-CMB-OEM

SmartCast Wireless Integration Module with

Bluetooth

Purpose of Document

This document is intended to provide fixture manufacturers with the information needed to properly integrate the

SmartCast

Wireless Integration Module controls with their fixtures.

Table of Contents

Compatible Drivers........................................................................................................3

Compatible Drivers.......................................................................................................3

Physical Mounting Considerations ..............................................................................4

Dimensions...................................................................................................................4

Fascia Plate..................................................................................................................4

Mounting Features .......................................................................................................5

Orientation....................................................................................................................5

Keep Out ......................................................................................................................6

Wiring Considerations ..................................................................................................6

Packaging.......................................................................................................................7

FCC COMPLIANCE STATEMENT..................................................................................8

Summary of content (8 pages)

PAGE 1
Application Note LPS2238, Rev C August 2019 SmartCast® Wireless Integration Module Available Part Numbers Part Number WIM-CMA-OEM WIM-CMB-OEM Description SmartCast Wireless Integration Module SmartCast Wireless Integration Module with Bluetooth Purpose of Document This document is intended to provide fixture manufacturers with the information needed to properly integrate the SmartCast® Wireless Integration Module controls with their fixtures. Table of Contents Compatible Drivers .......................
PAGE 2
Table of Figures Figure 1. Product Overview ...................................................................................................................3 Figure 2. Wiring Diagram .......................................................................................................................3 Figure 3. Module Dimensions................................................................................................................4 Figure 4. Fascia Example........................................
PAGE 3
Product Overview The SmartCast® Wireless Integration Module (WIM) is a modular system intended to be mounted into an existing light fixture or be mounted directly into the ceiling and leverage Cree’s SmartCast™ technology to automate setup, drive data acquisition, enable remote control, and provide energy savings for the user. Ambient Light Sensor PIR Reset Button Facia Snap Features Fixture Snap Features DALI Connection Figure 1.
PAGE 4
Physical Mounting Considerations 3D Step models for the SmartCast Wireless Integration Module are available upon request. It is recommended that the models are used to ensure seamless integration. Dimensions Dimensions in mm Figure 3. Module Dimensions Fascia Plate The SmartCast Wireless Integration Module is equipped with snaps on the sides of the module to allow the designer/integrator to design a custom fascia plate that creates a seamless, aesthetic look for any application.
PAGE 5
Mounting Features The SmartCast Wireless Integration Module is designed to be installed into the fixture from room side and the module includes release features within the snaps so that the module can be removed and replaced if needed. Base Dimensions: Example Base Mount. **Dimensions are in mm. Refer to 3D models for exact dimensions and snap interfaces. Figure 5. Base Mount Recommended Cutout: The WIM is designed to be recessed from the main surface to allow for a fascia plate to be installed. Figure 6.
PAGE 6
Keep Out Mounting Thickness:  Suitable for use in mounting thicknesses up to 1mm. Separation from Metal:  Maintain 0.25 inches (12.7mm) from metallic walls. o Note: For all fixture integrations, it is recommended that the antenna is tested to ensure successful communications over the desired range. 0.25 in (6.35mm) Figure 8. Separation from Metal Wiring Considerations Acceptable Wire Gauge: Parameter SOLID STRANDED Min 24 22 Max 18 20 Unit AWG AWG Table 2.
PAGE 7
EMC Considerations: The SmartCast Wireless Integration module can support up to 25ft cable lengths, however, long cable lengths can cause unintentional EMC compliance failures. It is recommended that the cable length between the module and the driver be kept to a minimum. A ferrite may be used on the DALI control lines to suppress noise for unintentional EMC filtering. Packaging Fixture packaging must protect the module so that it does not get damaged in shipping.
PAGE 8
FCC COMPLIANCE STATEMENT CAUTION: Changes or modifications not expressly approved could void your authority to use this equipment. This device complies with Part 15 of the FCC Rules.