Product Info

4
LPS2238: WIM – Rev C (August 2019)
Physical Mounting Considerations
3D Step models for the SmartCast Wireless Integration Module are available upon request. It is recommended that the
models are used to ensure seamless integration.
Dimensions
Dimensions in mm
Figure 3. Module Dimensions
Fascia Plate
The SmartCast Wireless Integration Module is equipped with snaps on the sides of the module to allow the
designer/integrator to design a custom fascia plate that creates a seamless, aesthetic look for any application.
Design Considerations:
 It is important that the sensor and button holes are maintained in order to ensure full functionality.
 Use the example fascia models for appropriate sizing and alignment.
 The fascia design should not contain any metallic material.
Figure 4. Fascia Example
Example Fascia
Fascia Snap Features
Example Fixture Base
Reset Button
PIR
ALS