Installation Guide

9/15
Page: 5 of 9
SmartThings Installation Instructions:
Installing the SmartThings
®
Hub:
1. Plug the SmartThings
®
Hub into the power adapter and an
Ethernet cable connected to your internet router. A solid green
light on the back indicates that it’s connected.
2. On your mobile device, download and install the SmartThings
Mobile app.
3. Fill in information related to your location, including providing a name
and selecting a location image.
4. During the account creation process you’ll be prompted to enter your 6 digit Welcome Code.
This will connect your SmartThings
®
Hub to your SmartThings account.
Pairing the Connected Cree
®
LED bulb in the SmartThings Mobile
App:
Connected Cree
®
LED bulbs are installed and paired one at a time with SmartThings
®
App.
1. Install a single Connected Cree
®
LED bulb in a lamp or light fixture.
The switch to the lamp or fixture should remain OFF at this time.
2. Open the SmartThings App and click the plus icon on the bottom of
the Dashboard.
3. Select Light Bulbs from the list of supported devices.
4. On the Lights list, select the Connected Cree
®
LED Bulb.
5. Select “Connect Now”.