Installation Guide

9/15
Page: 7 of 9
WeMo Installation Instructions:
Installing the WeMo Link:
1. Plug the WeMo Link into an outlet.
Note: Using your smart device, be sure you have two (2)
bars of signal strength from your router at that location.
2. Find and tap on your Settings icon and select Wi-Fi from the settings menu. Choose the
WeMo Wi-Fi from your network list.
Note: The default network name or SSID of the WeMo Link has this format,
WeMo.Link.xxx. The xxx represents the last three (3) digits of the serial number of the
WeMo Link.
3. Exit Setting and open your WeMo App.
4. It will try to scan nearby networks. If prompted, select your home wireless network. Once it
shows you’re connected, it will enable the Remote Access. Tap OK.