Installation Guide

9/15
Page: 8 of 9
Pairing Additional Connected Cree
®
LED bulbs in the WeMo App:
Connected Cree
®
LED bulbs can be installed and paired
up to 8 at a time with the WeMo app.
1. Launch the WeMo App and tap More, then Add WeMo
Link Devices
2. Install or screw in the Cree LED bulb(s) and turn the light
switch ON.
3. Once the new light bulb(s) is detected tap on Add Checked.
Note: If no bulb is found, power cycle the bulb for more
than 2 seconds.
4. You will be prompted to rename your new light bulb(s) and edit its picture or icon. Tap Done
once completed.