What You Will Need: 1. Connected Cree® LED bulb 2. Connected Cree® LED Bulb Compatible Hub Wink Hub SmartThings® Hub Other ZigBee® certified hub 3. Mobile device using the compatible Android®, iOS®, or Windows Phone® App 4. The latest version of the compatible App downloaded on your mobile device (Wink App, SmartThings App, or compatible App for your ZigBee® certified hub).
Wink Installation Instructions: Installing the Wink Hub: Note: Wink Hub Installation requires a Wi-Fi network connected with a router using WPA-PSK, WPA2-PSK or open security 1. Plug the Wink Hub into an outlet. The Hub will turn on and when it is ready to connect, the light on the Hub will begin flashing purple. 2. On your mobile device, open the Wink App and tap Add a Product. 3. Select Wink Hub from the product list. 4.
. Select Lights from Product list. 4. On the Lights list, select Cree Light Bulb. 5. The Wink App then guides you through a series of steps; the first step is installing the Connected Cree® LED bulb in a lamp or light fixture, if needed. 6. Step 2 instructs you to ensure Wink Hub is plugged in (bulb should remain OFF). Tap Next. 7. Step 3 indicates the Wink Hub is ready to add the Cree® bulb. The light on the Wink Hub will flash blue when ready to add your Connected Cree® LED bulb. 8.
. Tap the 3 dots in the top right corner to customize the settings for your lights and set Schedules. You can also access Help from this menu and view Activity. 5. From the main Wink page you can customize Shortcuts and Robots and also access Activity. Shortcuts let you control multiple products with one tap in the Wink app. For example, you can turn off all lights on the first floor of your home with one tap.
SmartThings Installation Instructions: Installing the SmartThings® Hub: 1. Plug the SmartThings® Hub into the power adapter and an Ethernet cable connected to your internet router. A solid green light on the back indicates that it’s connected. 2. On your mobile device, download and install the SmartThings Mobile app. 3. Fill in information related to your location, including providing a name and selecting a location image. 4.
. Turn ON the Connected Cree® LED bulb at the wall or lamp switch. 7. When the Connected Cree® LED bulb is connected, the SmartThings App will list the device as available to configure. Click on the device to name it as well as configure Top Alerts and Actions. 8. Repeat these steps to install each Connected Cree® LED bulb on your network. Controlling Connected Cree® LED bulbs with the SmartThings Mobile App: 1. Open the SmartThings Mobile App and click on the Things section. 2.