Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Warm white 10.9 W 368 lm 115 ° 9 V 1000 mA

CLD-DS73 REV 6

PRODUCT FAMILY DATA SHEET

, the

Cree logo, XLamp

and EasyWhite

are registered trademarks of Cree, Inc. UL

and the UR logo are registered trademarks of UL LLC.

WWW.CREE.COM/XLAMP

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

Cree

XLamp

CXA1304 LED

PRODUCT DESCRIPTION

The XLamp

CXA1304 LED array

expands Cree’s family of high‑ux,

multi-die arrays in a smaller,

easy-to-use platform. With XLamp

LED lighting-class reliability,

the CXA1304’s small, uniform

emitting surface enables both

directional and non-directional

lighting applications including lamp

retrot and luminaire designs.

Available in 2-step and 4-step color

consistency, and featuring a 6-mm

optical source, the CXA1304 brings

new levels of ux and efcacy to

this form factor.

The CX Family LED Design Guide

provides basic information on the

requirements to use the CXA1304

LED successfully in luminaire

designs.

FEATURES

• Available in ANSI white bins

as well as 4-step and 2-step

EasyWhite

bins at 2700 K,

3000 K, 3500 K, 4000 K and

5000 K CCT

• Available in ANSI white bins as

well as 4-step EasyWhite bins

at 5700 K and 6500 K CCT

• Available in 70-, 80-, 90- and

93-minimum CRI options

• Forward voltage options: 9-V

class, 18-V class & 36-V class

• 85 °C binning and

characterization

• Maximum drive current:

1000 mA (9 V), 500 mA (18 V),

250 mA (36 V)

• 115° viewing angle, uniform

chromaticity profile

• Top-side solder connections

• Thermocouple attach point

• NEMA SSL‑3 2011 standard ux

bins

• RoHS- and REACh-compliant

• UL

recognized component

(E349212)

TABLE OF CONTENTS

Characteristics .............................. 2

Operating Limits ............................ 2

Flux Characteristics, EasyWhite

Order Codes and Bins - 9 V ............. 4

Flux Characteristics, ANSI White

Order Codes and Bins - 9 V ............. 7

Flux Characteristics, EasyWhite

Order Codes and Bins - 18 V ..........10

Flux Characteristics, ANSI White

Order Codes and Bins - 18 V ..........13

Flux Characteristics, EasyWhite

Order Codes and Bins - 36 V ..........16

Flux Characteristics, ANSI White

Order Codes and Bins - 36 V ..........19

Relative Spectral Power

Distribution..................................22

Electrical Characteristics ................22

Relative Luminous Flux .................. 24

Typical Spatial Distribution .............27

Performance Groups - Brightness .... 27

Performance Groups - Chromaticity . 28

Cree EasyWhite

Bins Plotted on

the 1931 CIE Color Space ..............30

Cree ANSI White Bins Plotted on

the 1931 CIE Color Space ..............31

Bin and Order Code Formats ..........32

Mechanical Dimensions..................32

Thermal Design ............................33

Notes .......................................... 35

Packaging ....................................36

Summary of content (36 pages)

PAGE 1
® ® Cree XLamp CXA1304 LED Product Description features Table of Contents The XLamp® CXA1304 LED array • Available in ANSI white bins Characteristics............................... 2 expands Cree’s family of high‑flux, as well as 4-step and 2-step Operating Limits............................. 2 multi‑die EasyWhite bins at 2700 K, Flux Characteristics, EasyWhite® arrays in a smaller, ® easy‑to‑use platform. With XLamp 3000 K, 3500 K, 4000 K and Order Codes and Bins - 9 V..............
PAGE 2
XLamp ® CXA1304 LED Characteristics Characteristics Unit Viewing angle (FWHM) Minimum Typical degrees ESD withstand voltage (HBM per Mil-Std-883D) Maximum 115 V 8000 DC forward current (9 V) mA 1000* DC forward current (18 V) mA 500* DC forward current (36 V) mA 250* Reverse current (9 V, 18V, 36 V) mA 0.
PAGE 3
XLamp ® CXA1304 LED Operating Limits - Continued CXA1304-18V 600 500 If (mA) 400 300 18 V 200 100 0 0 25 50 75 100 125 150 Case Temperature (°C) CXA1304-36V 300 250 If (mA) 200 150 36 V 100 50 0 0 25 50 75 100 125 150 Case Temperature (°C) Copyright © 2013-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
PAGE 4
XLamp ® CXA1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 9 V (If = 400 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1304 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 32). Base Order Codes Min.
PAGE 5
XLamp ® CXA1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 9 V (If = 400 mA, TJ = 85 °C) - cONTINUED Base Order Codes Min.
PAGE 6
XLamp ® CXA1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 9 V (If = 400 mA, TJ = 85 °C) - cONTINUED Base Order Codes Min.
PAGE 7
XLamp ® CXA1304 LED Flux Characteristics, ANSI White Order Codes and Bins - 9 V (If = 400 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1304 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 32). Base Order Codes Min.
PAGE 8
XLamp ® CXA1304 LED Flux Characteristics, ANSI White Order Codes and Bins - 9 V (If = 400 mA, TJ = 85 °C) - Continued CCT Range Min 70 4000 K Base Order Codes Min.
PAGE 9
XLamp ® CXA1304 LED Flux Characteristics, ANSI White Order Codes and Bins - 9 V (If = 400 mA, TJ = 85 °C) - Continued Base Order Codes Min.
PAGE 10
XLamp ® CXA1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 200 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1304 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 32). Base Order Codes Min.
PAGE 11
XLamp ® CXA1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 200 mA, TJ = 85 °C) - cONTINUED Base Order Codes Min.
PAGE 12
XLamp ® CXA1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 200 mA, TJ = 85 °C) - cONTINUED Base Order Codes Min.
PAGE 13
XLamp ® CXA1304 LED Flux Characteristics, ANSI White Order Codes and Bins - 18 V (If = 200 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1304 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 32). CCT Range Min 70 Typ 75 6500 K 80 70 --- 75 5700 K 80 70 5000 K Base Order Codes Min.
PAGE 14
XLamp ® CXA1304 LED Flux Characteristics, ANSI White Order Codes and Bins - 18 V (If = 200 mA, TJ = 85 °C) - Continued CCT Range Min 70 4000 K Base Order Codes Min.
PAGE 15
XLamp ® CXA1304 LED Flux Characteristics, ANSI White Order Codes and Bins - 18 V (If = 200 mA, TJ = 85 °C) - Continued CCT Range Base Order Codes Min.
PAGE 16
XLamp ® CXA1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 100 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1304 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 32). Base Order Codes Min.
PAGE 17
XLamp ® CXA1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 100 mA, TJ = 85 °C) - cONTINUED Base Order Codes Min.
PAGE 18
XLamp ® CXA1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 100 mA, TJ = 85 °C) - cONTINUED Base Order Codes Min.
PAGE 19
XLamp ® CXA1304 LED Flux Characteristics, ANSI White Order Codes and Bins - 36 V (If = 100 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1304 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 32). CCT Range Min 70 Typ 75 6500 K 80 70 --- 75 5700 K 80 70 5000 K Base Order Codes Min.
PAGE 20
XLamp ® CXA1304 LED Flux Characteristics, ansi wHITE Order Codes and Bins - 36 V (If = 100 mA, TJ = 85 °C) - Continued CCT Range Min 70 4000 K Base Order Codes Min.
PAGE 21
XLamp ® CXA1304 LED Flux Characteristics, ansi wHITE Order Codes and Bins - 36 V (If = 100 mA, TJ = 85 °C) - Continued CCT Range Base Order Codes Min.
PAGE 22
XLamp ® CXA1304 LED Relative Spectral Power Distribution Relative Spectral Power Distribution The following graph is the result of a series of pulsed measurements at 400 mA for the 9-V CXA1304 LED, 200 mA for the 18-V CXA1304 LED and 100 mA for the 36-V CXA1304 LED and TJ = 85 °C.
PAGE 23
XLamp ® CXA1304 LED Electrical Characteristics - Continued 21.5 18 V Voltage (V) 20.5 Tc = 25 °C 19.5 Tc = 55 °C Tc = 85 °C 18.5 Tc = 105 °C 17.5 16.5 100 150 200 250 300 350 400 450 500 Current (mA) 43 36 V Voltage (V) 41 Tc = 25 °C 39 Tc = 55 °C Tc = 85 °C 37 Tc = 105 °C 35 33 50 75 100 125 150 175 200 225 250 Current (mA) Copyright © 2013-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
PAGE 24
XLamp ® CXA1304 LED Relative Luminous Flux The relative luminous flux values provided below are the ratio of: • Measurements of CXA1304 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 400 mA at TJ = 85 °C for the 9-V CXA1304 LED. Using the 9-V CXA1304 LED as an example, at steady-state operation of Tc = 55 °C, IF = 700 mA, the relative luminous flux ratio is 160% in the chart below.
PAGE 25
XLamp ® CXA1304 LED Relative Luminous Flux - Continued The relative luminous flux values provided below are the ratio of: • Measurements of CXA1304 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 200 mA at TJ = 85 °C for the 18-V CXA1304 LED. Using the 18-V CXA1304 LED as an example, at steady-state operation of Tc = 55 °C, IF = 350 mA, the relative luminous flux ratio is 160% in the chart below.
PAGE 26
XLamp ® CXA1304 LED Relative Luminous Flux - Continued The relative luminous flux values provided below are the ratio of: • Measurements of CXA1304 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 100 mA at TJ = 85 °C for the 36-V CXA1304 LED. Using the 36-V CXA1304 LED as an example, at steady-state operation of Tc = 55 °C, IF = 175 mA, the relative luminous flux ratio is 160% in the chart below.
PAGE 27
XLamp ® CXA1304 LED Typical Spatial Distribution Relative Luminous Intensity 100% 80% 60% 40% 20% -90 -70 -50 -30 0% -10 10 30 50 70 90 Angle (º) Performance Groups - Brightness (9 V, If = 400 ma; 18 V, If = 200 mA; 36 V, If = 100 mA, Tj = 85 °C) XLamp CXA1304 LEDs are tested for luminous flux and placed into one of the following bins. Group Code Min. Luminous Flux Max.
PAGE 28
XLamp ® CXA1304 LED Performance Groups - Chromaticity (Tj = 85 °C) XLamp CXA1304 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step Code 65F 57F 50F 40F 35F 30F 27F CCT 6500 K 5700 K 5000 K 4000 K 3500 K 3000 K 2700 K x y 0.3097 0.3196 0.3079 0.3297 0.3164 0.3382 0.3176 0.3275 0.3253 0.3325 0.3249 0.3439 0.3331 0.3514 EasyWhite Color Temperatures – 2-Step 0.3330 0.
PAGE 29
XLamp ® CXA1304 LED Performance Groups - Chromaticity (Tj = 85 °C) - Continued ANSI White Bins Code Bin Code CCT 1A0 1B0 0E1 6500 K 1C0 1D0 ANSI White Bins x y 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 CCT Bin Code 3A0 3B0 0E3 5000 K 3C0 3D0 CCT Bin Code 2A0 x y 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3068 0.3113 0.3222 0.3243 0.3028 0.3304 0.3207 0.3462 0.3115 0.3391 0.3290 0.3538 0.3130 0.3290 0.3290 0.3417 0.3048 0.3207 0.3115 0.3391 0.3205 0.
PAGE 30
XLamp ® CXA1304 LED Performance Groups - Chromaticity (Tj = 85 °C) - Continued ANSI White Bins ANSI White Bins Code Bin Code CCT 7A0 7B0 0E7 3000 K 7C0 7D0 Code CCT Bin Code x y .4373 .3893 .4465 .4071 .4582 .4099 .3853 .4483 .3919 .3984 .4465 .4071 .4299 .4165 .4562 .4260 .4430 .4212 .4687 .4289 .4342 .4028 .4582 .4099 .4582 .4099 .4687 .4289 .4813 .4319 x y .4147 .3814 .4221 .3984 .4342 .4028 .4259 .4221 8A0 8B0 0E8 2700 K .4342 .4028 .4430 .
PAGE 31
XLamp ® CXA1304 LED Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.45 ANSI C78.377 Quadrangle 0.44 2700K 3000K 0.43 0.42 3500K 0.41 6B 5C 5D 0.37 5700K 0.36 7D 7A 8A 8B 8C 8D 6D 5B 5000K 0.38 CCy 6C 4500K 0.39 6A 5A 3C 3B 6500K 0.35 1C 8000K 1B 0.32 3D 2C 2B 0.34 0.33 7B 4000K 0.40 7C 1D 3A 2D 2A 1A 0.31 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.
PAGE 32
XLamp ® CXA1304 LED Bin and Order Code Formats Bin codes and order codes are configured as follows: Order Code Bin Code Series = CXA13 Series = CXA13 Internal code Chromaticity bin CRI Specification 0 = Standard CRI 6 H = 80 min CRI NOTICE UTHE =INFORMATION 90 min CRI CREE CONFIDENTIAL. THIS PLOT AND CONTAINED WITHIN ARE THE PROPRIETARY AND Y =INC.
PAGE 33
XLamp ® CXA1304 LED Thermal Design The CXA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to ensure the CXA LED is being operated within its designed limits.
PAGE 34
XLamp ® CXA1304 LED CXA1304-18V Thermal Design - Continued Maximum R_c-a 100.00 18 V 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 100 150 200 250 300 350 400 450 500 Current (mA) CXA1304-36V Maximum R_c-a 100.00 36 V 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 50 75 100 125 150 175 200 225 250 Current (mA) Copyright © 2013-2015 Cree, Inc. All rights reserved.
PAGE 35
XLamp ® CXA1304 LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products.
PAGE 36
XLamp ® CXA1304 LED Packaging Cree CXA1304 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton, for a total of 100 LEDs per carton. Each carton contains 100 LEDs from the same performance bin. Dimensions are in inches. Tolerances: +.13 REV DESC. DATE BY REV CHK. DESC. DATE x° +1° BY CHK. 5.875 5.875 R.375 R.375 6 5 NOTICE FIDENTIAL. THIS PLOT AND THE INFORMATION D WITHIN ARE THE PROPRIETARY AND TIAL INFORMATION OF CREE, INC.