Datasheet

®v

, the Cree logo, XLamp

and EasyWhite

are

registered trademarks of Cree, Inc.

xlamp

mC-e leds

Storage Conditions

XLamp MC-E LEDs that have been removed from the original MBP but not soldered yet should be stored in a room or

cabinet that will maintain an atmosphere of 25 ± 5 ºC and no greater than 10% RH. For LEDs stored in these conditions,

storage time does not add to exposure time as dened in the above Moisture Sensitivity section.

RoHS Compliance

The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to

as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU

Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained

from your Cree representative or from the Product Documentation sections of www.cree.com.

REACh Compliance

REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical

Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,

please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned

substance information (REACh Article 67) is also available upon request.

UL Recognized Component

Level 1 enclosure consideration. The LED package or a portion thereof has not been investigated as a re enclosure or

a re and electrical enclosure per ANSI/UL 8750.

Vision Advisory

WARNING. Do not look at exposed LED lamps in operation. Eye injury can result. For more information about LEDs and

eye safety, please refer to the LED Eye Safety application note.