Datasheet

Copyright © 2008-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®v
, the Cree logo, XLamp
®
and EasyWhite
®
are
registered trademarks of Cree, Inc.
4
xlamp
®
mC-e leds
FLUX CHARACTERISTICS - EASYWHITE
®
MC-E LEDS (T
J
= 25 °C)
The following table provides order codes for XLamp MC-E EasyWhite LEDs. For a complete description of the order-code
nomenclature, please consult the XLamp MC-E LED Binning and Labeling document.
Color
CCT
Range
Base Order Codes
Min. Luminous Flux
@ 350 mA, 25 ° C
2-Step Order Code 4-Step Order Code
Group Flux (lm)
Chromaticity
Region
Chromaticity
Region
Standard
CRI
EasyWhite
4000 K
K 370
40H
MCEEZW-A1-0000-0000K040H
40F
MCEEZW-A1-0000-0000K040F
J 320 MCEEZW-A1-0000-0000J040H MCEEZW-A1-0000-0000J040F
3500 K
J 320
35H
MCEEZW-A1-0000-0000J035H
35F
MCEEZW-A1-0000-0000J035F
H 280 MCEEZW-A1-0000-0000H035H MCEEZW-A1-0000-0000H035F
3000 K
J 320
30H
MCEEZW-A1-0000-0000J030H
30F
MCEEZW-A1-0000-0000J030F
H 280 MCEEZW-A1-0000-0000H030H MCEEZW-A1-0000-0000H030F
2700 K
J 320
27H
MCEEZW-A1-0000-0000J027H
27F
MCEEZW-A1-0000-0000J027F
H 280 MCEEZW-A1-0000-0000H027H MCEEZW-A1-0000-0000H027F
80-CRI
Minimum
EasyWhite
4000 K
K 370
40H
MCEEZW-H1-0000-0000K040H
40F
MCEEZW-H1-0000-0000K040F
J 320 MCEEZW-H1-0000-0000J040H MCEEZW-H1-0000-0000J040F
3500 K
J 320
35H
MCEEZW-H1-0000-0000J035H
35F
MCEEZW-H1-0000-0000J035F
H 280 MCEEZW-H1-0000-0000H035H MCEEZW-H1-0000-0000H035F
3000 K
J 320
30H
MCEEZW-H1-0000-0000J030H
30F
MCEEZW-H1-0000-0000J030F
H 280 MCEEZW-H1-0000-0000H030H MCEEZW-H1-0000-0000H030F
2700 K
J 320
27H
MCEEZW-H1-0000-0000J027H
27F
MCEEZW-H1-0000-0000J027F
H 280 MCEEZW-H1-0000-0000H027H MCEEZW-H1-0000-0000H027F
85-CRI
Minimum
EasyWhite
3000 K
H 280
30H
MCEEZW-P1-0000-0000H030H
30F
MCEEZW-P1-0000-0000H030F
G 240 MCEEZW-P1-0000-0000G030H MCEEZW-P1-0000-0000G030F
2700 K
H 280
27H
MCEEZW-P1-0000-0000H027H
27F
MCEEZW-P1-0000-0000H027F
G 240 MCEEZW-P1-0000-0000G027H MCEEZW-P1-0000-0000G027F
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy)
measurements and ±2 on CRI measurements. See the Measurements section (page 10).
• For Standard CRI parts, the typical CRI is 80 for 4000 and 3500 K CCT parts and typical CRI is 82 for 3000 and
2700 K CCT.
• Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 mA and with
all LEDs lit simultaneously.