Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Warm white 320 lm 110 ° 3.2 V 350 mA

CLD-DS16 REV 6

PRODUCT FAMILY DATA SHEET

Cree

XLamp

MC-E LED

WWW. CREE.COM/XLAMP

notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

PRODUCT DESCRIPTION

The XLamp MC-E LED is a lighting-

class, multi-chip LED that provides

high lumen output in a small foot-

print package. Compared to discrete

LEDs, XLamp MC-E LEDs reduce the

distance between LED die, creating

a small optical source for excellent

optical control and efcient color

mixing. XLamp MC-E LEDs can re-

duce LED system complexity by re-

ducing the number of components

required.

Cree XLamp LEDs bring high perfor-

mance and quality of light to a wide

range of lighting applications, in-

cluding color-changing lighting, por-

table and personal lighting, outdoor

lighting, indoor directional lighting,

and entertainment lighting.

FEATURES

• Available in white (2600 K –

10,000 K CCT), EasyWhite™,

or color (RGBW)

• ANSI-compatible neutral &

warm white chromaticity bins

• Individually addressable LEDs

• Maximum drive current: 700

mA per LED die

• Reow solderable – JEDEC

J-STD-020

• Electrically neutral thermal

path

• RoHS and REACH-compliant

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

TABLE OF CONTENTS

Flux Characteristics .................... 2

Characteristics -

Complete Package ................. 3

Characteristics -

Per LED Die (White) ............... 3

Characteristics -

Per LED Die (Color) ................ 3

Relative Spectral Power Distribution

- White .................................... 4

Relative Spectral Power Distribution

- Color ..................................... 4

Relative Flux Output vs Junction

Temperature ............................. 5

Electrical Characteristics ............. 6

Relative Intensity vs. Current ...... 6

Typical Spatial Radiation Pattern .. 7

Reow Soldering Characteristics .. 8

Notes ....................................... 9

Mechanical Dimensions..............11

Tape and Reel ..........................12

Dry Packaging and Packaging .....13

Summary of content (28 pages)

PAGE 1
CLD-DS16 REV 6 PRODUCT FAMILY DATA SHEET Cree XLamp MC-E LED ® ® PRODUCT DESCRIPTION FEATURES Available in white (2600 K – Flux Characteristics..................... 2 class, multi-chip LED that provides 10,000 K CCT), EasyWhite™, Characteristics - high lumen output in a small foot- or color (RGBW) The XLamp MC-E LED is a lighting- print package.
PAGE 2
XLAMP MC-E LEDS FLUX CHARACTERISTICS (TJ = 25°C) The following tables provide several base order codes for XLamp MC-E. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp MC-E Binning and Labeling document. Part Color CCT / Dominant Wavelength Range Min. Max.
PAGE 3
XLAMP MC-E LEDS CHARACTERISTICS - COMPLETE PACKAGE The following table lists the product characteristics for the XLamp MC-E LED package.
PAGE 4
XLAMP MC-E LEDS Relative Spectral Power Distribution (If = 350 mA per LED) - Whit RELATIVE SPECTRAL POWER DISTRIBUTION (IF = 350 MA PER LED) - WHITE The following graph graph represents typicaltypical spectral outputoutput of theofXLamp MC-E MC-E White White LED with allwith fourall LEDs simultaneously. The following represents spectral the XLamp LED fouron LEDs on simultaneously.
PAGE 5
XLAMP MC-E LEDS RELATIVE SPECTRAL POWER DISTRIBUTION (IF = 350 MA PER LED) - COLOR (CONTINUED) The following graph represents typical spectral output of the XLamp MC-E Color LED with each LED on independently. The following graph represents typical spectral output of the XLamp MC-E Color LED with each LED on independently.
PAGE 6
XLAMP MC-E LEDS ELECTRICAL CHARACTERISTICS (TJ = 25˚C) The following graph represents typical performance of each LED die in the XLamp MC-E LED. 700 Forward Current (mA) 600 500 400 White, Blue 300 Red Green 200 100 0 1.5 2.0 2.5 3.0 3.5 4.0 Forward Voltage (V) Relative Intensity vs. Current (Tj = 25ºC) RELATIVE INTENSITY VS.
PAGE 7
XLAMP MC-E LEDS TYPICAL SPATIAL RADIATION PATTERN The following graph represents typical output of the XLamp MC-E LED with all four LEDs on simultaneously. Relative Luminous Intensity (%) 120 100 80 White 60 Color 40 20 0 -90 -60 -30 0 30 60 90 Angle (º) Copyright © 2008-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
PAGE 8
XLAMP MC-E LEDS REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp MC-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
PAGE 9
XLAMP MC-E LEDS NOTES Lumen Maintenance Projections Based on internal long-term reliability testing, Cree projects white XLamp MC-E LEDs to maintain an average of 70% lumen maintenance after 50,000 hours, provided the LED junction temperature is maintained at or below 135°C and each LED is operated with a constant current of up to 700 mA. Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
PAGE 10
XLAMP MC-E LEDS RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as a
PAGE 11
A Initial Release 10/16/07 RC B Change height due to new lens 10/23/2007 RC C Change recommended solder pad footprint 11/26/2007 RC D Height change due to new lens (was 3.86) 12/26/2007 RC E - Change package height FROM 1.5 TO 1.45 - Add LED reference designators - Delete Series Configuration schematic - Add tabs to recommended PCB footprint 5/12/2008 .80 TYP. 3 6 5 4 NOTICE RC CREE CONFIDENTIAL.
PAGE 12
XLAMP MC-E LEDS TAPE AND REEL All measurements in mm. 4.0±.1 1.5±.1 12.0±.1 1.75±.10 5.5±.1 Cathode Side +.3 16.0 .0 Anode Side (denoted by chamfer) User Feed Direction END START Loaded Pockets (200 Lamps) Trailer 160mm (min) of empty pockets sealed with tape (13 pockets min.) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (34 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 13mm 7" Copyright © 2008-2011 Cree, Inc. All rights reserved.
PAGE 13
XLAMP MC-E LEDS DRY PACKAGING AND PACKAGING Dessicant Desiccant Dessicant Desiccant (inside bag) (inside bag) (inside bag) (inside bag) Humidity Indicator Humidity Indicator Humidity Indicator Card (inside bag)bag) Humidity Indicator (inside Card (inside bag)bag) (inside Vacuum-Sealed Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Vacuum-Sealed MoistureBarrier Barrier Bag Moisture Bag Moisture Barrier Bag Label Bin with Cree Bin CREE Code Label with Cree Bin CREE Bin Code & Barcode Label Code, Qty, Lo
PAGE 14
CLD-AP20 REV 6 BINNING & LABELING Cree XLamp MC-E LED ® ® INTRODUCTION TABLE OF CONTENTS This document describes the product nomenclature Introduction....................................................... 2 required to select and order Cree XLamp MC-E LEDs. Bin and Order-Code Format (White)...................... 3 XLamp MC-E LEDs are tested and sorted into bins Bin and Order-Code Format (EasyWhite)...............
PAGE 15
CLD-AP20 REV 6 BIN AND ORDER-CODE FORMAT (WHITE) Bin codes and order codes are configured in the following manner: Series MCE = MC-E Color WT = White Optical characteristic 2 = Lambertian Order Code Kit number SSSGCC-BD-HHHH-NNNNNN Internal code Package configuration A = Individually addressable (all anodes on same side) Number of chips 4 = 4 chips Series MCE = MC-E Color WT = White Package configuration A = Individually addressable (all anodes on same side) Chromaticity group Bin Code Luminous flux
PAGE 16
CLD-AP20 REV 6 BIN AND ORDER-CODE FORMAT (EASYWHITE™) Bin codes and order codes are configured in the following manner: Series MCE = MC-E Package configuration A = Individually addressable (all anodes on same side) Internal code Order Code SSSCCC-BD-HHHH-NNNNNNNNN Kit number Optical characteristic 1 = Lambertian Color EZW = EasyWhite Series MCE = MC-E Package configuration A = Individually addressable (all anodes on same side) Chromaticity group Internal code Bin Code SSSCCC-BD-WWW-FF-GG-AAAA Flux gr
PAGE 17
CLD-AP20 REV 6 BIN AND ORDER-CODE FORMAT (COLOR) Bin codes and order codes are configured in the following manner: Series MCE = MC-E Color CT = Red, Green, Blue, White Optical characteristics 2 = Lambertian Internal code Order Code Dominant wavelength kit (RGB) SSSGCC-BD-HHHH-NNNNNNNNN Chromaticity kit for white Flux kit Internal code Package configuration A: Individually addressable (all anodes on same side) Number of chips 4 = 4 chips Series MCE = MC-E Color CT = Red, Green, Blue, White Optical chara
PAGE 18
CLD-AP20 REV 6 PERFORMANCE GROUPS – BRIGHTNESS XLamp MC-E White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code Min. Luminous Flux @ 350 mA (lm) Max. Luminous Flux @ 350 mA (lm) F 210 240 G 240 280 H 280 320 J 320 370 K 370 430 M 430 490 * Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 mA. * The flux and chromaticity are measured with all LEDs lit simultaneously.
PAGE 19
CLD-AP20 REV 6 PERFORMANCE GROUPS – CHROMATICITY XLamp MC-E White LEDs and the white LED in the XLamp MC-E Color LED are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the following pages. The XLamp MC-E White LED is tested with each LED die connected to independent drive circuits at 350 mA and all LEDs lit simultaneously. The white LED in the XLamp MC-E Color LED is tested individually. Region WK WA WM WB WE WN WC x y .283 .284 .295 .297 .
PAGE 20
CLD-AP20 REV 6 PERFORMANCE GROUPS – CHROMATICITY (CONTINUED) Region 3A 4A 5A 6A 7A 8A 40F 40H x y .3371 .3490 .3451 .3554 .3440 .3428 .3366 Region x y .3376 .3616 .3463 .3687 .3451 .3554 .3369 .3371 .3512 .3465 .3529 .3597 .3615 .3659 .3590 .3670 .3702 .3722 .3825 .3798 .3783 Region x y .3463 .3687 .3551 .3760 .3533 .3620 .3490 .3451 .3529 .3597 .3548 .3736 .3641 .3804 .3521 .3615 .3578 .3702 .3736 .3874 .3869 .3958 .3646 .3825 .3889 .
PAGE 21
CLD-AP20 REV 6 PERFORMANCE GROUPS – DOMINANT WAVELENGTH The red, green and blue LEDs in the XLamp MC-E Color LED are tested individually for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. DWL Group Min. DWL @ 350 mA Max. DWL @ 350 mA K 450 455 L 455 460 M 460 465 2 520 525 Green 3 525 530 4 530 535 Red A 620 630 Color Blue Copyright © 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
PAGE 22
CLD-AP20 REV 6 CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE Cool White                                                Neutral and Warm White 0.45 0.44 2900K 2600K 3000K 0.43 3200K 0.42 3500K 7B 4000K 0.40 6C 4300K 0.39 5000K 0.38 0.37 4B 3C 0.36 3B 3D 0.
PAGE 23
CLD-AP20 REV 6 CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE (CONTINUED) 0.45 EasyWhite 0.44 0.43 3000K 3500K 0.42 4000K 0.41 CCy 2700K ANSI C78.377 Quadrangle EasyWhite "F" (4-Step) Chromaticity Regions 4500K 27F 0.40 30F 0.39 35F 0.38 40F 0.37 0.36 0.45 0.43 0.49 0.48 0.47 0.46 0.45 0.44 0.43 CCx 2700K ANSI C78.377 Quadrangle EasyWhite "H" (2-Step) Chromaticity Regions 0.44 3000K 3500K 0.42 4000K 0.41 CCy 0.42 0.41 0.40 0.39 0.38 0.37 0.
PAGE 24
CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E COOL WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - White Min.
PAGE 25
CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E NEUTRAL WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range.
PAGE 26
CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E WARM WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range.
PAGE 27
CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E EASYWHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range.
PAGE 28
CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E COLOR) Preliminary The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s April 29, 2009 color or chromaticity bins and luminous flux range.