Datasheet

CLD-AP20 REV 6
BINNING & LABELING
Cree
®
XLamp
®
MC-E LED
WWW. CREE.COM/XLAMP
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: [phone]
TABLE OF CONTENTS
Introduction ...................................................... 2
Bin and Order-Code Format (White) ..................... 3
Bin and Order-Code Format (EasyWhite)............... 4
Bin and Order-Code Format (Color) ...................... 5
Performance Groups –
Brightness ....................................................... 6
Performance Groups –
Chromaticity ..................................................... 7
Performance Groups –
Dominant Wavelength ........................................ 9
Cree’s Standard Chromaticity Regions Plotted
on the 1931 CIE Curve ..................................... 10
Standard Order Codes and Bins
(MC-E Cool White) ........................................... 12
Standard Order Codes and Bins
(MC-E Neutral White) ....................................... 12
Standard Order Codes and Bins
(MC-E Warm White) ......................................... 13
Standard Order Codes and Bins
(MC-E EasyWhite)............................................ 14
Standard Order Codes and Bins
(MC-E Color) ................................................... 15
INTRODUCTION
This document describes the product nomenclature
required to select and order Cree XLamp MC-E LEDs.
XLamp MC-E LEDs are tested and sorted into bins
which are then combined into orderable kits identied
by an order code.
All XLamp LEDs are tested and sorted by color and
brightness into a unique bin. Each bin contains LEDs
from only one color and brightness group and is
uniquely identied by a bin code. White XLamp LEDs
are sorted by chromaticity (color) and luminous ux
(brightness). Color XLamp LEDs are sorted by domi-
nant wavelength (color) and luminous ux (bright-
ness). LEDs are shipped on reels containing LEDs from
one bin and are always labeled with the appropriate
bin code.
Kits contain LEDs from a number of similar bins and
are fully dened by their order codes. A full explana-
tion of the order codes for XLamp MC-E, as well as a
list of standard order codes, is provided in this docu-
ment.
Copyright © 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree
logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or
a specication. For product specications, please see the data sheets available at www.cree.com. For warranty information, please contact
Cree Sales at [e-mail].