Datasheet
Table Of Contents
- Characteristics (TJ = 25 °C)
- Flux Characteristics - ML-E Parallel White (TJ = 25 °C)
- Relative Spectral Power Distribution - White
- Relative Luminous Flux vs. Junction Temperature - White (Parallel: IF = 150 mA, Series: IF = 50 mA)
- Relative Radiant Flux vs. Junction Temperature - Parallel Royal Blue (IF = 150 mA)
- Electrical Characteristics - Parallel White (TJ = 25 °C)
- Relative Luminous Flux vs. Current - Parallel White (TJ = 25 °C)
- Relative Radiant Flux vs. Current - parallel Royal Blue (TJ = 25 °C)
- Typical Spatial Distribution - White
- Thermal Design - Parallel White
- Reflow Soldering Characteristics
- Notes
- Mechanical Dimensions (TA = 25 °C)
- Tape and Reel
- Packaging
Copyright © 2010-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo and XLamp
®
are registered
trademarks of Cree, Inc.
23
XLamp
®
mL-E LEDs
Storage Conditions
XLamp ML-E LEDs that have been removed from the original MBP but not soldered should be stored in one of the
following ways:
• Store the parts in a rigid metal container with a tight-tting lid. Verify that the storage temperature is <30 °C, and
place fresh desiccant and an RH indicator in the container to verify that the RH is no greater than 60%.
• Store the parts in a dry, nitrogen-purged cabinet or container that actively maintains the temperature at <30° and
the RH at no greater than 60%.
• For short-term store only: LEDs can be resealed in the original MBP soon after opening. Fresh desiccant may be
needed. Use the included humidity indicator card to verify <60% RH.
If an environment of <60% RH is not available for storage, XLamp ML-E LEDs should be baked (described above) before
reow soldering.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to
as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU
Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained
from your Cree representative or from the Product Documentation sections of www.cree.com.
REACh Compliance
REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical
Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,
please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned
substance information (REACh Article 67) is also available upon request.
UL Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a re and electrical
enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and
eye safety, please refer to the LED Eye Safety application note.