Datasheet
Table Of Contents
- Characteristics (TJ = 25 °C)
- Flux Characteristics - ML-E Parallel White (TJ = 25 °C)
- Relative Spectral Power Distribution - White
- Relative Luminous Flux vs. Junction Temperature - White (Parallel: IF = 150 mA, Series: IF = 50 mA)
- Relative Radiant Flux vs. Junction Temperature - Parallel Royal Blue (IF = 150 mA)
- Electrical Characteristics - Parallel White (TJ = 25 °C)
- Relative Luminous Flux vs. Current - Parallel White (TJ = 25 °C)
- Relative Radiant Flux vs. Current - parallel Royal Blue (TJ = 25 °C)
- Typical Spatial Distribution - White
- Thermal Design - Parallel White
- Reflow Soldering Characteristics
- Notes
- Mechanical Dimensions (TA = 25 °C)
- Tape and Reel
- Packaging
Copyright © 2010-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo and XLamp
®
are registered
trademarks of Cree, Inc.
24
XLamp
®
mL-E LEDs
MECHANICAL DIMENSIONS (T
A
= 25 °C)
All measurements are ±.13 mm unless otherwise indicated.
MX3535 Pad Layout
Bottom View
Top View
Side View
Top View
Recommended PCB Solder Pad
Alternative Solder Pad
Recommended FR4 Solder Pad w/Thermal Vias
MX3535 Pad Layout
Bottom View
Top View
Side View
Top View
Recommended PCB Solder Pad
Alternative Solder Pad
Recommended FR4 Solder Pad w/Thermal Vias
MX3535 Pad Layout
Bottom View
Top View
Side View
Top View
Recommended PCB Solder Pad
Alternative Solder Pad
Recommended FR4 Solder Pad w/Thermal Vias
Top View
Bottom View Side View
Recommended PCB Solder Pad Alternate Solder Pad