Datasheet
Table Of Contents
- Characteristics (TJ = 25 °C)
- Flux Characteristics - ML-E Parallel White (TJ = 25 °C)
- Relative Spectral Power Distribution - White
- Relative Luminous Flux vs. Junction Temperature - White (Parallel: IF = 150 mA, Series: IF = 50 mA)
- Relative Radiant Flux vs. Junction Temperature - Parallel Royal Blue (IF = 150 mA)
- Electrical Characteristics - Parallel White (TJ = 25 °C)
- Relative Luminous Flux vs. Current - Parallel White (TJ = 25 °C)
- Relative Radiant Flux vs. Current - parallel Royal Blue (TJ = 25 °C)
- Typical Spatial Distribution - White
- Thermal Design - Parallel White
- Reflow Soldering Characteristics
- Notes
- Mechanical Dimensions (TA = 25 °C)
- Tape and Reel
- Packaging
Copyright © 2010-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo and XLamp
®
are registered
trademarks of Cree, Inc.
3
XLamp
®
mL-E LEDs
FLUX CHARACTERISTICS - PARALLEL WHITE (T
J
= 25 °C)
The following table provides several base order codes for XLamp ML-E LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as
a complete description of the order-code nomenclature, please consult the XLamp ML LED Family Binning and Labeling
document.
Color
CCT Range
Base Order Codes
Minimum Luminous
Flux (lm) @ 150 mA
Calculated Minimum
Luminous Flux (lm)*
Order Code
Min. Max. Group Flux (lm) 350 mA 500 mA
Cool White 5000 K 8300 K
N2 51.7 104.8 132.9 MLEAWT-A1-0000-000451
M3 45.7 92.6 117.4 MLEAWT-A1-0000-000351
80-CRI
Cool White
6000 K 7000 K M3 45.7 92.6 117.4 MLEAWT-H1-0000-0003E1
4750 K 5250 K M3 45.7 92.6 117.4 MLEAWT-H1-0000-0003E3
Warm White
3700 K 4300 K
M3 45.7 92.6 117.4 MLEAWT-A1-0000-0003E5
M2 39.8 80.7 102.3 MLEAWT-A1-0000-0002E5
2800 K 3200 K
M2 39.8 80.7 102.3 MLEAWT-A1-0000-0002E7
K3 35.2 71.4 90.5 MLEAWT-A1-0000-0001E7
80-CRI
Warm White
3700 K 4300 K M2 39.8 80.7 102.3 MLEAWT-H1-0000-0002E5
2800 K 3200 K K3 35.2 71.4 90.5 MLEAWT-H1-0000-0001E7
85-CRI
Warm White
2800 K 3200 K K3 35.2 71.4 90.5 MLEAWT-P1-0000-0001E7
90-CRI
Warm White
2800 K 3200 K K2 30.6 62 78.6 MLEAWT-U1-0000-0000E7
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy)
measurements and ±2 on CRI measurements. See the Measurements section (page 22).
• Typical CRI for Cool White (4300 K – 8300 K CCT) is 75.
• Typical CRI for Warm White (2600 K – 4300 K CCT) is 80.
• Minimum CRI for 80-CRI White is 80.
• Minimum CRI for 85-CRI White is 85.
• Minimum CRI for 90-CRI White is 90
* Calculated ux values are for reference only.