Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Warm white 25 W 500 lm 120 ° 36 V 700 mA

Product family data sheet

, the Cree logo,

XLamp

and EasyWhite

are registered trademarks of Cree, Inc. UL

and the UR logo are registered trademarks of UL LLC.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

WWW.CREE.COM/XLAMP

CLD-DS36 REV 9B

Cree

XLamp

MT-G EasyWhite

LEDs

PRODUCT DESCRIPTION

The XLamp

MT-G EasyWhite

LED

maximizes lumen density, eliminates

chromaticity binning and enables

luminaire and bulb manufacturers to

deliver consistent color and high‑efcacy

light output in a new, compact, multi-die

package. XLamp MT-G EasyWhite LEDs

can reduce LED-to-LED color variation

to within a 2-step MacAdam ellipse,

94% smaller than the total area of the

corresponding ANSI C78.377 color region.

The XLamp MT-G EasyWhite LED is the

perfect choice for lighting applications

where high luminous ux output is

required from a single, small point source.

Example applications include: LED

retrot bulbs, commercial/retail display

spotlights, and other indoor general

illumination applications.

FEATURES

• Cree EasyWhite color temperatures

from 2700K to 5000K CCT

• Wide range of operating power - up

to 25W

• 85°C binning and characterization

• Two voltage options: 6V, 36V

• Low effective thermal resistance:

1.5°C/W

• High lumen density

• Wide viewing angle: 120°

• 80‑minimum CRI at 2700K and

3000K CCT

• 85‑ and 90‑minimum CRI available in

2700K and 3000K CCT

• Electrically neutral thermal path

• RoHS- and REACh-compliant

• UL

recognized component

(E349212)

APPLICATIONS

• MR, PAR and other directional retrot

bulbs

• Commercial/residential directional

lighting

• General illumination

TABLE OF CONTENTS

Characteristics ....................................... 2

Flux Characteristics, EasyWhite

Order

Codes and Bins ‑ 6V .............................. 3

Flux Characteristics, EasyWhite

Order

Codes and Bins ‑ 36V ............................ 5

Relative Spectral Power Distribution .... 7

Relative Luminous Flux vs. Junction

Temperature ........................................... 7

Electrical Characteristics ....................... 8

Relative Luminous Flux vs. Current ....... 9

Typical Spatial Distribution .................. 10

Performance Groups – Brightness ..... 10

Performance Groups – Chromaticity .. 11

Cree EasyWhite

Color Temperatures

Plotted on the 1931 CIE Curve ............ 12

Bin and Order Code Formats ............... 12

Reow Soldering Characteristics ........ 13

Notes .................................................... 14

Mechanical Dimensions ...................... 16

Tape and Reel ....................................... 17

Packaging ............................................. 18

Summary of content (18 pages)

PAGE 1
CLD-DS36 Rev 9B Product family data sheet Cree® XLamp® MT-G EasyWhite® LEDs Product Description FEATURES Table of contents The XLamp® MT-G EasyWhite® LED • Cree EasyWhite color temperatures from 2700 K to 5000 K CCT Characteristics........................................ 2 • Wide range of operating power - up to 25 W maximizes lumen density, eliminates chromaticity binning and enables luminaire and bulb manufacturers to Codes and Bins - 6 V...............................
PAGE 2
XLamp ® MT-G EasyWhite ® LED Characteristics Characteristics Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Effective thermal resistance, junction to solder point Unit degrees Minimum Typical 120 V °C/W Maximum 8000 1.5 LED junction temperature °C DC forward current (6 V) mA 1100 4000 DC forward current (36 V) mA 185 700 Forward voltage (6 V, 1100 mA, 85 °C) V 5.6 6.7 Forward voltage (36 V, 185 mA, 85 °C) V 33.5 40.
PAGE 3
XLamp ® MT-G EasyWhite ® LED Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V (IF = 1100 mA, Tj = 85 °C) The following tables provide order codes for 6-volt XLamp MT-G EasyWhite LEDs. For a complete description of the order code nomenclature, please reference page 12 of this document.
PAGE 4
XLamp ® MT-G EasyWhite ® LED Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V (IF = 1100 mA, Tj = 85 °C) - Continued Color CCT Range 3000 K 90 CRI Minimum 2700 K Minimum Luminous Flux @ 1100 mA 2-Step Chromaticity Region 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* C0 370 424 D0 400 458 E0 440 504 MTGEZW-00-0000-0B0UE030H MTGEZW-00-0000-0B0UE030F B0 340 390 MTGEZW-00-0000-0B0UB027H MTGEZW-00-0000-0B0UB027F C0 370 424 D0 400 458 Order Code Chromaticity Region
PAGE 5
XLamp ® MT-G EasyWhite ® LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (IF = 185 mA, Tj = 85 °C) The following table provide order codes for 36-volt XLamp MT-G EasyWhite LEDs. For a complete description of the order code nomenclature, please reference page 12 of this document.
PAGE 6
XLamp ® MT-G EasyWhite ® LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (IF = 185 mA, Tj = 85 °C) - Continued Color CCT Range 3000 K 90 CRI Minimum 2700 K Minimum Luminous Flux @ 185 mA 2-Step Chromaticity Region 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* C0 370 424 D0 400 458 E0 440 504 MTGEZW-00-0000-0B0UE030H MTGEZW-00-0000-0B0UE030F B0 340 390 MTGEZW-00-0000-0B0UB027H MTGEZW-00-0000-0B0UB027F C0 370 424 D0 400 458 Order Code Chromaticity Region
PAGE 7
XLamp ® MT-G EasyWhite ® LED Relative Spectral Power Distribution White - the only roboto graph The following graph represents typical spectral output of each die of the MT-G Relative Spectral Power Distribution (6 V, 1100 mA; 36 V, 185 mA; TJ= 85 °C) The following graph represents typical spectral output of the XLamp MT-G EasyWhite LED. 100% Relative Spectral Power 80% 60% Cool White Warm White 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs.
PAGE 8
XLamp ® MT-G EasyWhite ® LED Electrical Characteristics (Tsp = 85ºC) 6V Electrical Characteristics (TJ = 85 °C) 4000 3500 Current (mA) 3000 2500 2000 6V 1500 1000 500 0 5 5.25 5.5 36V 5.75 6 6.25 Forward Voltage( V) 700 600 Current (mA) 500 400 36 V 300 200 100 0 31 32 33 34 35 36 37 38 Forward Voltage( V) Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
PAGE 9
XLamp ® MT-G EasyWhite ® LED Relative Intensity vs. Current (Tsp = 85ºC) Relative Luminous Flux vs. Current (TJ = 85 °C) 300% Relative Luminous Flux 250% 200% 150% 6V 100% 50% 0% 0 500 1000 1500 2000 2500 3000 3500 4000 Forward Current, Pulsed (mA) 300% Relative Luminous Flux 250% 200% 36 V 150% 100% 50% 0% 0 100 200 300 400 500 600 700 Forward Current, Pulsed (mA) Copyright © 2011-2015 Cree, Inc. All rights reserved.
PAGE 10
XLamp ® MT-G EasyWhite ® LED Spatial Distribution Typical Spatial Distribution The following graph represents typical performance of the XLamp MT-G EasyWhite LED. 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -60 0% -30 0 30 60 90 Angle (º) Performance Groups – Brightness (TJ = 85 °C) XLamp MT-G EasyWhite LEDs are tested for luminosity and placed into one of the following bins. Group Code Min. Luminous Flux @ 1100 mA, 6 V; @185 mA, 36 V Max.
PAGE 11
XLamp ® MT-G EasyWhite ® LED Performance Groups – Chromaticity (TJ = 85 °C) XLamp MT-G EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite® Color Temperatures – 4-Step EasyWhite® Color Temperatures – 4-Step Code 50F 40F 35F 30F 27F CCT 5000 K 4000 K 3500 K 3000 K 2700 K x y 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 0.3685 0.3784 0.3741 0.3837 0.3804 0.3818 0.3867 0.3857 x y 0.
PAGE 12
XLamp ® MT-G EasyWhite ® LED Cree EasyWhite® Color Temperatures Plotted on the 1931 CIE Curve (TJ = 85 °C) 0.45 ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step 0.44 2700 K 3000 K 0.43 3500 K 0.42 4000 K 4500 K 0.41 CCy 0.40 5000 K 0.39 5700 K 0.38 0.37 0.36 0.35 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.
PAGE 13
XLamp ® MT-G EasyWhite ® LED Reflow Soldering Characteristics In testing, Cree has found XLamp MT-G EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
PAGE 14
XLamp ® MT-G EasyWhite ® LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products.
PAGE 15
XLamp ® MT-G EasyWhite ® LED Notes - Continued Vision Advisory WARNING. Do not look at exposed LED lamps in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
PAGE 16
6 6 5 5 5 4 4 4 NOTICE NOTICE CE REE CONFIDENTIAL. THIS AND THE INFORMATION FIDENTIAL. THIS PLOT ANDPLOT THE INFORMATION S PLOT AND THE ONTAINED WITHIN ARE THE PROPRIETARY AND D WITHIN ARE THEINFORMATION PROPRIETARY AND HE PROPRIETARY AND ONFIDENTIAL INFORMATION CREE, THIS PLOT TIAL INFORMATION OF CREE,OF INC. THIS INC. PLOT ION OF CREE, INC.
PAGE 17
XLamp ® MT-G EasyWhite ® LED 6 5 4 3 2 1 REVISONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC.
PAGE 18
XLamp ® MT-G EasyWhite ® LED Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custom Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID