Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Warm white 25 W 540 lm 120 ° 36 V 700 mA

CLD-DS36 REV 8

PRODUCT FAMILY DATA SHEET/

BINNING AND LABELING DOCUMENT

Cree

XLamp

MT-G EasyWhite

LEDs

WWW.CREE.COM/XLAMP

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

PRODUCT DESCRIPTION

The XLamp

MT-G EasyWhite

LED

maximizes lumen density, eliminates

chromaticity binning and enables

luminaire and bulb manufacturers

to deliver consistent color and

high‑efcacy light output in a new,

compact, multi-die package. XLamp

MT-G EasyWhite LEDs can reduce

LED-to-LED color variation to within

a 2-step MacAdam ellipse, 94%

smaller than the total area of the

corresponding ANSI C78.377 color

region.

The XLamp MT-G EasyWhite LED

is the perfect choice for lighting

applications where high luminous

ux output is required from a

single, small point source. Example

applications include: LED retrot

bulbs, commercial/retail display

spotlights, and other indoor general

illumination applications.

FEATURES

• Cree EasyWhite color

temperatures from 2700 K to

5000 K CCT

• Wide range of operating power -

up to 25 W

• 85 °C binning and

characterization

• Two voltage options: 6 V, 36 V

• Low effective thermal

resistance: 1.5 °C/W

• High lumen density

• Wide viewing angle: 120°

• 80-minimum CRI at 2700 K and

3000 K CCT

• 85- and 90-minimum CRI

available in 2700 K and 3000 K

CCT

• Electrically neutral thermal path

• RoHS- and REACh-compliant

• UL-recognized component

(E349212)

APPLICATIONS

• MR, PAR and other directional

retrot bulbs

• Commercial/residential

directional lighting

• General illumination

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Cree

, the Cree logo, XLamp

and EasyWhite

are registered trademarks of Cree, Inc.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

TABLE OF CONTENTS

Characteristics .......................... 2

Flux Characteristics .................... 3

Relative Spectral Power

Distribution............................... 7

Relative Luminous Flux vs.

Junction Temperature ................. 7

Electrical Characteristics ............. 8

Relative Luminous Flux vs

Current .................................. 9

Typical Spatial Distribution .........10

Performance Groups –

Brightness ...............................10

Performance Groups –

Chromaticity ............................11

Cree EasyWhite Color

Temperatures Plotted on the

1931 CIE Curve ........................12

Bin and Order Code Format ........12

Reow Soldering Characteristics .13

Notes ......................................14

Mechanical Dimensions..............15

Tape and Reel ..........................16

Packaging ................................17

Summary of content (17 pages)

PAGE 1
CLD-DS36 Rev 8 Product family data sheet/ bINNING AND lABELING dOCUMENT Cree® XLamp® MT-G EasyWhite® LEDs Product Description FEATURES Table of contents The XLamp® MT-G EasyWhite® LED • Cree EasyWhite color temperatures from 2700 K to 5000 K CCT Characteristics........................... 2 maximizes lumen density, eliminates chromaticity binning and enables luminaire and bulb manufacturers to deliver consistent color and high‑efficacy light output in a new, compact, multi‑die package.
PAGE 2
xlamp ® MT-G EasyWhite ® LEDs Characteristics Characteristics Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Effective thermal resistance, junction to solder point Unit degrees Minimum Typical 120 V °C/W Maximum 8000 1.5 LED junction temperature °C DC forward current (6 V) mA 1100 4000 DC forward current (36 V) mA 185 700 Forward voltage (6 V, 1100 mA, 85 °C) V 5.6 6.7 Forward voltage (36 V, 185 mA, 85 °C) V 33.5 40.
PAGE 3
xlamp ® MT-G EasyWhite ® LEDs Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V (IF = 1100 mA, Tj = 85 °C) The following tables provide order codes for 6-volt XLamp MT-G EasyWhite LEDs. For a complete description of the order code nomenclature, please reference page 12 of this document. Color CCT Range 5000 K 4000 K Standard CRI 3500 K 3000 K 2700 K Base Order Codes Min.
PAGE 4
xlamp ® MT-G EasyWhite ® LEDs Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V (IF = 1100 mA, Tj = 85 °C) - Continued Color CCT Range 3000 K 85 CRI Minimum 2700 K 3000 K 90 CRI Minimum 2700 K Base Order Codes Min.
PAGE 5
xlamp ® MT-G EasyWhite ® LEDs Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (IF = 185 mA, Tj = 85 °C) The following table provide order codes for 36-volt XLamp MT-G EasyWhite LEDs. For a complete description of the order code nomenclature, please reference page 12 of this document. Color CCT Range 5000 K 4000 K Standard CRI 3500 K 3000 K 2700 K Base Order Codes Min.
PAGE 6
xlamp ® MT-G EasyWhite ® LEDs Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (IF = 185 mA, Tj = 85 °C) - Continued Color CCT Range 3000 K 85 CRI Minimum 2700 K 3000 K 90 CRI Minimum 2700 K Base Order Codes Min.
PAGE 7
xlamp ® MT-G EasyWhite ® LEDs Relative Spectral Power Distribution White The following graph represents typical spectral output of each die of the MT-G Relative Spectral Power Distribution (6 V, 1100 mA; 36 V, 185 mA; TJ= 85 °C) The following graph represents typical spectral output of the XLamp MT-G EasyWhite LED. 100% Relative Spectral Power Warm White Cool White 80% 60% 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs.
PAGE 8
xlamp ® MT-G EasyWhite ® LEDs Electrical Characteristics (Tsp = 85ºC) 6V Electrical Characteristics (TJ = 85 °C) 4000 3500 Current (mA) 3000 2500 2000 MT-G 6 V 1500 1000 500 0 5 5.25 5.5 5.75 6 6.25 Forward Voltage V 36V 700 600 Current (mA) 500 400 MT-G 36 V 300 200 100 0 31.00 32.00 33.00 34.00 35.00 36.00 37.00 38.00 Forward Voltage V ® ® ® Copyright © 2010 2011-2014 Cree,AllInc. All rights reserved.
PAGE 9
xlamp ® MT-G EasyWhite ® LEDs Relative Intensity vs. Current (Tsp = 85ºC) Relative Luminous Flux vs Current (TJ = 85 °C) Relative Luminous Flux 300% 250% 200% 150% MT-G 6 V 100% 50% 0% 0 A, or 183.33 if @ 36V) 500 1000 1500 2000 2500 3000 3500 4000 Forward Current, Pulsed (mA) Relative Luminous Flux 300% 250% 200% 150% MT-G 36 V 100% 50% 0% 0 100 200 300 400 500 600 700 Forward Current, Pulsed (mA) ® ® ® Copyright © 2010 2011-2014 Cree,AllInc. All rights reserved.
PAGE 10
xlamp ® MT-G EasyWhite ® LEDs Spatial Distribution Typical Spatial Distribution The following graph represents typical performance of the XLamp MT-G EasyWhite LED. Relative Luminous Intensity 100% 80% 60% 40% 20% -90 -60 -30 0% 0 30 60 90 Angle (º) Performance Groups – Brightness (TJ = 85 °C) XLamp MT-G EasyWhite LEDs are tested for luminosity and placed into one of the following bins. Group Code Min. Luminous Flux @ 1100 mA, 6 V; @185 mA, 36 V Max.
PAGE 11
xlamp ® MT-G EasyWhite ® LEDs Performance Groups – Chromaticity (TJ = 85 °C) XLamp MT-G EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step EasyWhite Color Temperatures – 2-Step Code Code 50F 40F 35F 30F 27F CCT 5000 K 4000 K 3500 K 3000 K 2700 K x y 0.3407 0.3459 0.3415 0.3586 x y 0.3429 0.3507 0.3434 0.3571 0.3499 0.3654 0.3484 0.3521 0.3475 0.3604 0.3469 0.
PAGE 12
xlamp ® MT-G EasyWhite ® LEDs Cree EasyWhite® Color Temperatures Plotted on the 1931 CIE Curve (TJ = 85 °C) 0.45 ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step 0.44 2700K 3000K 0.43 3500K 0.42 4000K 0.41 4500K 0.40 5000K CCy 0.39 5700K 0.38 0.37 0.36 0.35 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.
PAGE 13
xlamp ® MT-G EasyWhite ® LEDs Reflow Soldering Characteristics In testing, Cree has found XLamp MT-G EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
PAGE 14
xlamp ® MT-G EasyWhite ® LEDs Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products.
PAGE 15
6 6 5 5 5 4 4 4 NOTICE NOTICE CE REE CONFIDENTIAL. THIS AND THE INFORMATION FIDENTIAL. THIS PLOT ANDPLOT THE INFORMATION S PLOT AND THE ONTAINED WITHIN ARE THE PROPRIETARY AND D WITHIN ARE THEINFORMATION PROPRIETARY AND HE PROPRIETARY AND ONFIDENTIAL INFORMATION CREE, THIS PLOT TIAL INFORMATION OF CREE,OF INC. THIS INC. PLOT ION OF CREE, INC.
PAGE 16
xlamp ® MT-G EasyWhite ® LEDs 6 5 4 3 2 1 REVISONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC.
PAGE 17
xlamp ® MT-G EasyWhite ® LEDs Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Qty, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Qty, Reel ID, PO # Label with Cree Bin Code, Qty, Reel ID Label with Custom Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Qty, Reel ID, PO # Patent Label Label with Cree Bin Code, Qty, Reel ID Patent Label ® ® ® Copyr