Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Cold white 1 W 130 lm 120 ° 3.3 V 350 mA

CLD-23 REV 3

PRODUCT FAMILY DATA SHEET

Cree

XLamp

MX-6 LEDs

WWW.CREE.COM/XLAMP

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

PRODUCT DESCRIPTION

The Cree XLamp MX-6 LED provides

the proven lighting-class perfor-

mance and reliability of Cree XLamp

LEDs in a at-top PLCC package.

The XLamp MX-6 LED continues

Cree’s history of innovation in LEDs

for lighting applications with wide

viewing angle, unlimited oor life,

uniform light output without sec-

ondary optics and electrically neu-

tral thermal path.

The XLamp MX-6 LED brings high

performance and quality of light

to a wide range of lighting applica-

tions, including linear lighting, LED

light bulbs, uorescent retrots and

retail-display lighting.

FEATURES

• Available in white (2,600 K to

8,300 K CCT)

• Maximum drive current: 1000

• Wide viewing angle: 120°

• Electrically neutral thermal

path

• Qualication at max drive

current

• RoHS-compliant

• Unlimited oor life at

≤ 30°C/85% RH

TABLE OF CONTENTS

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

Label with Cree Bin Code,

Qty, Lot # ......................................

Label with Customer Order Code, ..

Qty, Reel ID, PO# ..........................

Flux Characteristics .................... 2

Characteristics .......................... 2

Relative Spectral Power

Distribution............................... 3

Relative Flux vs. Junction

Temperature ............................. 3

Electrical Characteristics ............. 4

Relative Flux vs. Current ............ 4

Thermal Design ......................... 5

Typical Spatial Distribution .......... 5

Reow Soldering Characteristics .. 6

Notes ....................................... 7

Mechanical Dimensions............... 8

Tape and Reel ........................... 9

Packaging ............................... 10

Label with Cree Bin Code,

Qty, Lot # .................................

Label with Customer Order

Code, ........................................

Qty, Reel ID, PO# .....................

Summary of content (27 pages)

PAGE 1
CLD-23 REV 3 PRODUCT FAMILY DATA SHEET Cree® XLamp® MX-6 LEDs PRODUCT DESCRIPTION FEATURES The Cree XLamp MX-6 LED provides • • Label with Cree .................... Bin Code, Flux Characteristics. 2 Qty,Characteristics........................... Lot #.......................................2 8,300 K CCT) 10 Relative Spectral Power Maximum drive current: 1000 Label with Customer Order Code,... 10 Distribution............................... 3 mA Qty, Reel ID, PO#...........................
PAGE 2
XLAMP MX-6 LEDS FLUX CHARACTERISTICS (TJ = 25°C) The following table provides several base order codes for XLamp MX-6 LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp MX-6 LED Binning & Labeling document. CCT Range Color Min. Cool White 5,000 K Max.
PAGE 3
XLAMP MX-6 LEDS Relative Spectral Power RELATIVE SPECTRAL POWER DISTRIBUTION Relative Radiant Power (%) 100 80 60 5000K - 8300K CCT 3500K - 5000K CCT 40 2600K - 3500K CCT 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) Relative Flux Output vs. Junction Temperature RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 300 MA) 100% Relative Luminous Flux 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2009-2010 Inc.
PAGE 4
XLAMP MX-6 LEDS ELECTRICAL CHARACTERISTICS (TJ = 25°C) 1000 900 Forward Current (mA) 800 700 600 500 400 300 200 100 0 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50 Forward Voltage (V) RELATIVE FLUX VS. CURRENT (TJ = 25°C) Relative Luminous Flux (%) 300 250 200 150 100 50 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Copyright © 2009-2010 Inc. All rights reserved. The information this document is subject to change without notice.
PAGE 5
XLAMP MX-6 LEDS THERMAL DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics.
PAGE 6
XLAMP MX-6 LEDS REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp MX-6 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder 3°C/second max.
PAGE 7
XLAMP MX-6 LEDS NOTES Lumen Maintenance Projections Based on internal long-term reliability testing, Cree projects XLamp MX-6 LEDs will maintain an average of 70% or higher lumen maintenance after 35,000 hours, provided the LED is operated with a constant current of not more than 600 mA and ambient air temperature around the LED is maintained at or below 85°C. Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
PAGE 8
XLAMP MX-6 LEDS MECHANICAL DIMENSIONS All measurements are ±.13 mm unless otherwise indicated. Top View Top View Bottom View Side View Recommended FR4 Solder Pad Recommended MCPCB Solder Pad Alternative Solder Pad Copyright © 2009-2010 Inc. All rights reserved. The information this document is subject to change without notice. the logo Cree and logoXLamp and XLamp are registered trade2010 Cree, Cree, Inc. All rights reserved. The information in thisindocument is subject to change without notice.
PAGE 9
1.5±.1 4.0±.1 XLAMP MX-6 LEDS 8.0±.1 1.75±.10 2.5±.1 Cathode Side TAPE AND REEL All dimensions in mm. +.3 12.0 .0 Anode Side User Feed Direction (denoted by + and circle) END START User Feed Direction END START Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) Loaded Pockets (1,000 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 13mm 7" Copyright © 2009-2010 Inc.
PAGE 10
Dessicant Desiccant XLAMP MX-6 LEDS (inside bag) (inside bag) Humidity Indicator Humidity Indicator Card (inside bag)bag) (inside PACKAGING Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label Bin with Cree Bin CREE Code & Barcode Label Code, Qty, Lot # Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Label with Customer P/N, Qty, Lot #, PO## Code, Qty, Lot Label with Cree Bin
PAGE 11
CLD-BL30 REV 4 BINNING & LABELING Cree® XLamp® MX Family LEDs INTRODUCTION TABLE OF CONTENTS This document describes the product nomenclature re- Bin and Order-Code Format................................... 2 quired to select and order Cree’s XLamp MX Family of Performance Groups – Brightness........................... 3 LEDs. XLamp MX Family LEDs are tested and sorted Performance Groups – VF......................................
PAGE 12
CLD-BL30 REV 4 BIN AND ORDER-CODE FORMAT For MX-6 and MX-3 (parallel), bin codes and order codes are configured in the following manner: Order Code Bin Code Series MX6A = MX-6 MX3A = MX-3 Series MX6A = MX-6 MX3A = MX-3 Color specification A1 = White H1 = 80CRI Color specification A1 = White H1 = 80CRI Kit number SSSSCC-BB-HHHH-NNNNNN Luminous or radiant flux group Internal code SSSSCC-BD-WWW-FF-G-AAAAA Forward voltage group Internal code Chromaticity Color WT = White Color WT = White For MX-6 and
PAGE 13
CLD-BL30 REV 4 PERFORMANCE GROUPS – BRIGHTNESS White XLamp MX Family LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code Min. Luminous Flux (lm) Max. Luminous Flux (lm) P2 67.2 73.9 P3 73.9 80.6 P4 80.6 87.4 Q2 87.4 93.9 100 Q3 93.9 Q4 100 107 Q5 107 114 R2 114 122 R3 122 130 R4 130 139 R5 139 148 PERFORMANCE GROUPS – VF MX-6 Group Code Min. V @ 300 mA Max. V @ 300 mA MX-3 Group Code D 2.8 3.2 D 2.8 3.2 E 3.
PAGE 14
CLD-BL30 REV 4 PERFORMANCE GROUPS – CHROMATICITY Region 0A 0R 1A 1R 2A 2R 3A 3R 4A 4R x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.2980 0.2950 0.2970 0.3009 0.3042 0.3037 0.2937 0.3048 0.3130 0.3144 0.3186 0.3068 0.3068 0.3144 0.3186 0.3161 0.3059 0.3093 Region x y 0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3042 0.2984 0.2880 0.2895 0.2870 0.3210 0.2937 0.3312 0.2962 0.3220 0.3207 0.3028 0.3290 0.3115 0.3130 0.3290 0.3113 0.3048 0.3113 0.
PAGE 15
CLD-BL30 REV 4 PERFORMANCE GROUPS – CHROMATICITY (CONTINUED) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 0.3702 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 0.3825 0.3847 0.3912 0.3917 0.3887 0.3783 0.3804 0.3721 0.3863 0.3758 0.3840 Region x y 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3612 0.3744 0.3722 0.3719 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 0.3798 0.3847 0.3877 0.3912 0.3877 0.3869 0.
PAGE 16
CLD-BL30 REV 4 PERFORMANCE GROUPS – CHROMATICITY (CONTINUED) Region 7B1 7C1 7D1 8A1 8B1 8C1 8D1 x y 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 0.4342 0.4385 0.4119 0.4449 0.4141 0.4403 0.4049 0.4259 0.4300 0.4359 0.3960 0.4316 0.4373 0.4418 0.3981 0.4475 0.3994 0.4428 Region x y 0.4259 0.4073 x y 0.4322 0.4096 0.4299 0.4165 0.4364 0.4188 0.4364 0.4188 0.4430 0.4212 0.4006 0.4322 0.4028 0.4385 0.4096 0.4385 0.4119 0.4449 0.4430 0.4212 0.4496 0.
PAGE 17
CLD-BL30 REV 4 CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE 0.42 0.41 4500K 0.40 5000K 0.39 4T 4S 0.38 4C 3S 0.37 6500K 0.34 0T 0.33 0S 0.32 0C 0B 0.31 0D 4R 3U 3R 2A 1D ANSI C78.377A 2U 2R 1A 0A 2D 1C 1B 4U 3A 2B 1S 4A 3D 2C 1T 8000K 4D 3B 2S 0.35 4B 3C 2T 0.36 CCy 3T 5700K 1U 1R 0U 0.30 0R 0.29 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx 0.46 0.45 2700K 3000K 0.44 0.43 3500K 0.42 4000K 0.
PAGE 18
CLD-BL30 REV 4 STANDARD ORDER CODES AND BINS (MX-3 COOL WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-3 LED Standard Order Codes - Cool White Min. Luminous Flux (lm) @ 350 mA* Flux (lm) Calculated Min.
PAGE 19
CLD-BL30 REV 4 STANDARD ORDER CODES AND BINS (MX-3 WARM WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-3 LED Standard Order Codes - Warm White Min. Luminous Flux (lm) @ 350 mA* Group Flux (lm) Calculated Min.
PAGE 20
CLD-BL30 REV 4 STANDARD ORDER CODES AND BINS (MX-6 COOL WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6 LED Standard Order Codes - Cool White Min. Luminous Flux (lm) @ 300 mA* Flux (lm) Calculated Min.
PAGE 21
CLD-BL30 REV 4 STANDARD ORDER CODES AND BINS (MX-6 80-CRI MINIMUM, WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6 LED Standard Order Codes - 80-CRI minimum, White Min. Luminous Flux (lm) @ 300 mA* Flux (lm) Calculated Min.
PAGE 22
CLD-BL30 REV 4 STANDARD ORDER CODES AND BINS (MX-6 WARM WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6 LED Standard Order Codes - Warm White Min. Luminous Flux (lm) @ 300 mA* Flux (lm) Calculated Min.
PAGE 23
CLD-BL30 REV 4 STANDARD ORDER CODES AND BINS (MX-3S COOL WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-3S LED Standard Order Codes - Cool White Min.
PAGE 24
CLD-BL30 REV 4 STANDARD ORDER CODES AND BINS (MX-3S WARM WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-3S LED Standard Order Codes - Warm White Min.
PAGE 25
CLD-BL30 REV 4 STANDARD ORDER CODES AND BINS (MX-6S COOL WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6S LED Standard Order Codes - Cool White Min.
PAGE 26
CLD-BL30 REV 4 STANDARD ORDER CODES AND BINS (MX-6S 80-CRI MINIMUM, WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6S LED Standard Order Codes - 80-CRI minimum, White Min.
PAGE 27
CLD-BL30 REV 4 STANDARD ORDER CODES AND BINS (MX-6S WARM WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6S LED Standard Order Codes - Warm White Min.