Datasheet
XLAMP MX-6 LEDS
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
2
Copyright © 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trade-
marks of Cree, Inc.
222
FLUX CHARACTERISTICS (T
J
= 25°C)
The following table provides several base order codes for XLamp MX-6 LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a
complete description of the order-code nomenclature, please consult the XLamp MX-6 LED Binning & Labeling document.
Color
CCT Range
Base Order Codes
Min Luminous Flux
(lm) @ 300 mA
Calculated
Min Luminous
Flux (lm)
@ 350 mA*
Order Code
Min. Max. Group Flux (lm) Flux (lm)
Cool White 5,000 K 8,300 K
Q5 107 122 MX6AWT-A1-0000-000D51
R2 114 130 MX6AWT-A1-0000-000E51
Q4 100 114 MX6AWT-A1-0000-000CE3
Q5 107 122 MX6AWT-A1-0000-000DE3
80-CRI
White
3,700K 4,300K
Q2 87.4 100 MX6AWT-H1-0000-000AE5
Q3 93.9 107 MX6AWT-H1-0000-000BE5
2,600K 3,700K
P4 80.6 92 MX6AWT-H1-0000-0009E7
Q2 87.4 100 MX6AWT-H1-0000-000AE7
Warm White
3,700 K 4,300 K
Q3 93.9 107 MX6AWT-A1-0000-000BE5
Q4 100 114 MX6AWT-A1-0000-000CE5
2,600 K 3,700 K
Q2 87.4 100 MX6AWT-A1-0000-000AE7
Q3 93.9 107 MX6AWT-A1-0000-000BE7
* Calculated values for reference purposes only.
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements and ±2 on CRI measurements.
• Typical CRI for Cool White (4,300 K – 8,300 K CCT) is 75.
• Typical CRI for Warm White (2,600 K – 4,300 K CCT) is 80.
• Minimum CRI for 80-CRI White is 80.
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 5
Viewing angle (FWHM) degrees 120
Temperature coefcient of voltage mV/°C -3.3
ESD classication (HBM per Mil-Std-883D) Class 2
DC forward current mA 1000
Forward voltage (@ 300 mA) V 3.3 3.8
LED junction temperature °C 150
* The increase of maximum forward current to 1000 mA for XLamp MX-6 White is retroactive and applies to all XLamp
MX-6 White LEDs produced by Cree. This increase is the result of more extensive testing that was performed after the
initial product launch.