Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Neutral white 4 W 104 lm 120 ° 20 V 175 mA

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

CLD-AP30 REV 6

BINNING & LABELING

Cree

XLamp

MX Family LEDs

WWW.CREE.COM/XLAMP

the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and

is not a warranty or a specication. For product specications, please see the data sheets available at www.cree.com. For warranty

information, please contact Cree Sales at sales@cree.com.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

INTRODUCTION

This document describes the product nomenclature

required to select and order Cree’s XLamp

MX family

of LEDs. XLamp MX Family LEDs are tested and sorted

into bins which are then combined into orderable kits

identied by an order code.

All XLamp LEDs are tested and sorted by color and

brightness into a unique bin. Each bin contains LEDs

from only one color and brightness group and is uniquely

identied by a bin code. White XLamp LEDs are sorted

by chromaticity (color), luminous ux (brightness) and

sometimes voltage and/or color rendering index (CRI).

LEDs are shipped on reels containing LEDs from one bin

and are always labeled with the appropriate bin code.

Kits contain LEDs from a number of similar bins and

are fully dened by their order codes. A full explanation

of the order codes for XLamp MX Family LEDs, as well

as a list of standard order codes, is provided in this

document.

TABLE OF CONTENTS

Bin and Order-Code Format .................................. 2

Performance Groups – Brightness .......................... 3

Performance Groups – V

..................................... 3

Performance Groups – Chromaticity ....................... 4

Cree’s Standard Chromaticity Regions Plotted on the

1931 CIE Curve ...................................................7

Standard Order Codes and Bins

MX-3 Cool White ............................................... 8

MX-3 Warm White ............................................. 9

MX-6 Cool White ............................................. 10

MX-6 80-CRI Minimum Cool White .................... 11

MX-6 80-CRI Minimum, White .......................... 12

MX-6 Outdoor Warm White ............................... 14

MX-6 Warm White ........................................... 15

MX-6 2200 K, Warm White ............................... 16

MX-3S Cool White ........................................... 17

MX-3S Warm White ......................................... 18

MX-6S Cool White ........................................... 19

MX-6S 80-CRI Minimum, Cool White .................. 20

MX-6S 80-CRI Minimum, White ......................... 21

MX-6S Warm White ......................................... 23

Summary of content (24 pages)

PAGE 1
CLD-ap30 Rev 6 Binning & Labeling Cree® XLamp® MX Family LEDs Table of contents Introduction This document describes the product nomenclature Bin and Order-Code Format................................... 2 MX family Performance Groups – Brightness........................... 3 of LEDs. XLamp MX Family LEDs are tested and sorted Performance Groups – VF ...................................... 3 into bins which are then combined into orderable kits Performance Groups – Chromaticity.....................
PAGE 2
xlamp ® mx led binning & labeling Bin and Order-Code Format For MX-6 and MX-3 (parallel), bin codes and order codes are configured in the following manner: Order Code Bin Code Series MX6A = MX-6 MX3A = MX-3 Series MX6A = MX-6 MX3A = MX-3 Color specification A1 = White 01 = Outdoor White (MX-6 only) H1 = 80 CRI Color specification A1 = White 01 = Outdoor White (MX-6 only) H1 = 80 CRI Luminous or radiant flux group Kit number Internal code SSSSCC-BD-WWW-FF-G-AAAAA SSSSCC-BB-HHHH-NNNNNN Inter
PAGE 3
xlamp ® mx led binning & labeling Performance Groups – Brightness White XLamp MX Family LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code Min. Luminous Flux (lm) Max. Luminous Flux (lm) N4 62 67.2 P2 67.2 73.9 P3 73.9 80.6 P4 80.6 87.4 93.9 Q2 87.4 Q3 93.9 100 Q4 100 107 Q5 107 114 R2 114 122 R3 122 130 R4 130 139 R5 139 148 Performance Groups – VF MX-6 Group Code Min. V @ 300 mA Max.
PAGE 4
xlamp ® mx led binning & labeling Performance Groups – Chromaticity Region 0A 0R 1A 1R 2A 2R 3A 3R 4A 4R x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.2980 0.2950 0.2970 0.3009 0.3042 0.3037 0.2937 0.3048 0.3130 0.3144 0.3186 0.3068 0.3068 0.3144 0.3186 0.3161 0.3059 0.3093 Region x y 0.2920 0.3060 x y 0.2984 0.3133 x y 0.2984 0.3133 0.2895 0.3135 0.2962 0.3220 0.2962 0.3220 0.3028 0.3304 0.3048 0.3207 0.3068 0.3113 0.3042 0.2984 0.
PAGE 5
xlamp ® mx led binning & labeling Performance Groups – Chromaticity (continued) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 7B1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 0.3702 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 0.3825 0.3847 0.3912 0.3917 0.3887 0.3836 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3889 0.3915 0.3768 0.3981 0.3800 0.3953 0.3720 0.3941 0.3968 0.4040 0.3966 0.4010 0.4080 0.4113 0.4001 0.4186 0.4037 0.4150 Region x y 0.
PAGE 6
xlamp ® mx led binning & labeling Performance Groups – Chromaticity (continued) Region 7C1 7D1 8A1 8B1 8C1 8D1 AA1 AB1 AC1 AD1 x y 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4403 Region x y 0.4385 0.4119 x y 0.4449 0.4141 x y 0.4403 0.4049 0.4430 0.4212 0.4496 0.4236 0.4496 0.4236 0.4562 0.4260 0.4449 0.4141 0.4513 0.4164 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071 0.4259 0.3853 0.4300 0.3939 0.4300 0.3939 0.4342 0.4028 0.4359 0.3960 0.
PAGE 7
xlamp ® mx led binning & labeling Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve 0.42 0.41 4500K 0.40 5000K 0.39 4T 4S 0.38 4C 3S 0.37 6500K 0.34 0T 0.33 0S 0.32 0B 0.31 0A 0.30 4U 4R 3U 3R 2A 1D ANSI C78.377A 2U 2R 1A 0D 2D 1C 1B 0C 3A 2B 1S 4A 3D 2C 1T 8000K 4D 3B 2S 0.35 4B 3C 2T 0.36 CCy 3T 5700K 1U 1R 0U 0R 0.29 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx 0.45 0.44 2200K 2450K 2700K 3000K 0.
PAGE 8
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-3 Cool White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-3 LED Standard Order Codes - Cool White Min. Luminous Flux (lm) @ 350 mA* Group Flux (lm) Calculated Min.
PAGE 9
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-3 Warm White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-3 LED Standard Order Codes - Warm White Min. Luminous Flux (lm) @ 350 mA* Group Flux (lm) Calculated Min. Luminous Flux (lm) @ 300 mA** Chromaticity Regions Order Code CCT Flux (lm) Warm White (2,600 K – 4,300 K) P2 P3 P4 Q2 Q3 Q4 67.2 73.
PAGE 10
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6 Cool White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6 LED Standard Order Codes - Cool White Min. Luminous Flux (lm) @ 300 mA* Group Flux (lm) Calculated Min.
PAGE 11
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6 80-CRI Minimum Cool White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6 LED Standard Order Codes - 80-CRI Minimum, Cool White Min. Luminous Flux (lm) @ 300 mA* Group Flux (lm) Calculated Min.
PAGE 12
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6 80-CRI Minimum, White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6 LED Standard Order Codes - 80-CRI Minimum, White Min. Luminous Flux (lm) @ 300 mA* Group Flux (lm) Calculated Min.
PAGE 13
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6 80-CRI minimum, White) - continued XLamp MX-6 LED Standard Order Codes - 80-CRI Minimum, White Min. Luminous Flux (lm) @ 300 mA* Group Flux (lm) Calculated Min.
PAGE 14
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6 Outdoor Warm White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6 LED Standard Order Codes - Outdoor Warm White Min. Luminous Flux (lm) @ 300 mA* Calculated Min. Luminous Flux (lm) @ 350 mA** Chromaticity Regions Order Code CCT MX6AWT-01-0000-000BE7 3000 K Group Flux (lm) Flux (lm) Q3 93.
PAGE 15
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6 Warm White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6 LED Standard Order Codes - Warm White Min. Luminous Flux (lm) @ 300 mA* Group Flux (lm) Calculated Min.
PAGE 16
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6 Warm White) - Continued XLamp MX-6 LED Standard Order Codes - Warm White Min. Luminous Flux (lm) @ 300 mA* Group Flux (lm) Calculated Min. Luminous Flux (lm) @ 350 mA** Chromaticity Regions Order Code CCT Flux (lm) Warm White (2,600 K – 4,300 K) Q3 Q4 93.
PAGE 17
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-3S Cool White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-3S LED Standard Order Codes - Cool White Min.
PAGE 18
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-3S Warm White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-3S LED Standard Order Codes - Warm White Min. Luminous Flux (lm) @ 115 mA* Group Chromaticity Regions Order Code CCT 2700 K Flux (lm) Warm White (2,600 K – 4,300 K) P2 P3 P4 Q2 Q3 Q4 67.2 73.9 80.6 87.4 93.
PAGE 19
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6S Cool White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6S LED Standard Order Codes - Cool White Min.
PAGE 20
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6S 80-CRI Minimum, Cool White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6S LED Standard Order Codes - 80-CRI Minimum, Cool White Min.
PAGE 21
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6S 80-CRI Minimum, White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6S LED Standard Order Codes - 80-CRI Minimum, White Min. Luminous Flux (lm) @ 60 mA* Group Chromaticity Regions Order Code CCT Flux (lm) Warm White (2600 K – 4300 K) P3 P4 Q2 * 73.9 80.6 87.
PAGE 22
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6S 80-CRI minimum, White) - continued XLamp MX-6S LED Standard Order Codes - 80-CRI Minimum, White Min.
PAGE 23
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6S Warm White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MX-6S LED Standard Order Codes - Warm White Min.
PAGE 24
xlamp ® mx led binning & labeling Standard Order Codes and Bins (MX-6S Warm White) - Continued XLamp MX-6S LED Standard Order Codes - Warm White Min.