Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Cold white 4 W 111 lm 120 ° 20 V 175 mA

CLD-DS31 REV 7

PRODUCT FAMILY DATA SHEET

Cree

XLamp

MX-6S LEDs

WWW.CREE.COM/XLAMP

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

PRODUCT DESCRIPTION

The Cree XLamp

MX-6S LED

provides the proven lighting-class

performance and reliability of Cree

XLamp LEDs in a high-voltage,

PLCC conguration. All members

of the MX family of LEDs have wide

viewing angle, uniform light output

without secondary optics, unlimited

oor life, and electrically neutral

thermal path.

The XLamp MX-6S LED brings high

performance and quality of light

to a range of lighting applications

that require near-line-voltage

conguration, including LED light

bulbs, uorescent retrots and

retail-display lighting.

FEATURES

• Available in white (2600 K to

8300 K CCT)

• Wide viewing angle: 120°

• 20 VDC nominal with voltage

binning available

• Electrically neutral thermal

path

• Qualication at maximum drive

current

• RoHS- and REACh-compliant

• UL-recognized component

(E349212)

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Cree

, the Cree logo and XLamp

are registered trademarks of Cree, Inc.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

TABLE OF CONTENTS

Characteristics .......................... 2

Flux Characteristics .................... 3

Relative Spectral Power

Distribution............................... 4

Relative Flux vs. Junction

Temperature ............................. 4

Electrical Characteristics ............. 5

Relative Flux vs. Current ............ 5

Typical Spatial Distribution .......... 6

Thermal Design ......................... 6

Reow Soldering Characteristics .. 7

Notes ....................................... 8

Mechanical Dimensions..............10

Tape and Reel ..........................11

Packaging ................................12

Summary of content (12 pages)

PAGE 1
CLD-ds31 Rev 7 Product family data sheet Cree® XLamp® MX-6S LEDs Product Description The Cree XLamp® MX-6S LED FEATURES Table of Contents • Available in white (2600 K to Characteristics........................... 2 8300 K CCT) Flux Characteristics..................... 3 provides the proven lighting‑class performance and reliability of Cree • Wide viewing angle: 120° Relative Spectral Power XLamp LEDs in a high‑voltage, • 20 VDC nominal with voltage Distribution.........................
PAGE 2
xlamp ® mx-6s leds Characteristics Characteristics Thermal resistance, junction to solder point Viewing angle (FWHM) Temperature coefficient of voltage ESD withstand voltage (HBM per Mil-Std-883D) DC forward current Unit Minimum Typical °C/W 5 degrees 120 mV/°C -20 Maximum V 8000 mA 175 Forward voltage (@ 60 mA) V LED junction temperature °C 20.0 22.0 150 ® ® Copyright © 2010 2010-2014 Cree, All reserved. rights reserved.
PAGE 3
xlamp ® mx-6s leds Flux Characteristics (TJ = 25 °C) The following table provides several base order codes for XLamp MX-6S LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp MX LED Family Binning and Labeling document. Color CCT Range Min. Cool White 5000 K 5000 K Max.
PAGE 4
xlamp ® mx-6s leds Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power (%) 100 90 80 70 60 5000 K - 8300 K CCT 50 3500 K - 5000 K CCT 40 2600 K - 3500 K CCT 30 20 10 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature Relative Flux vs.
PAGE 5
xlamp ® mx-6s leds Electrical Characteristics (Tj = 25ºC) Electrical Characteristics (TJ = 25 °C) 175 Forward Current (mA) 150 125 100 75 50 25 0 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 Forward Voltage (V) Relative Intensity vs. Current (Tj = 25ºC) Relative Flux vs. Current (TJ = 25 °C) Relative Luminous Flux (%) 250 200 150 100 50 0 0 25 50 75 100 125 150 175 Forward Current (mA) ® ® Copyright © 2010 2010-2014 Cree, All reserved. rights reserved.
PAGE 6
xlamp ® mx-6s leds Typical Spatial Radiation Pattern Typical Spatial Distribution Relative Luminous Intensity (%) 100 80 60 40 20 -100 -80 -60 -40 -20 0 0 20 40 60 80 100 Angle (º) Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient.
PAGE 7
xlamp ® mx-6s leds Reflow Soldering Characteristics In testing, Cree has found XLamp MX-6S LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder 3 °C/second max.
PAGE 8
xlamp ® mx-6s leds Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products.
PAGE 9
xlamp ® mx-6s leds Notes - Continued Storage Conditions XLamp MX-6S LEDs that have been removed from the original MBP but not soldered should be stored in one of the following ways: • Store the parts in a rigid metal container with a tight-fitting lid. Verify that the storage temperature is <30 °C, and place fresh desiccant and an RH indicator in the container to verify that the RH is no greater than 60%.
PAGE 10
xlamp ® mx-6s leds Mechanical Dimensions All measurements are ±.13 mm unless otherwise indicated. Top View Top View Bottom View Side View Recommended FR4 Solder Pad Recommended MCPCB Solder Pad Alternative Solder Pad ® ® Copyright © 2010 2010-2014 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc.
PAGE 11
6 5 4 3 2 1 REVISONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. REV DESCRIPTION BY A Released J.L. 7/1/09 B ADDED CATHODE AND ANODE NOTES DC 2/26/12 1.5±.1 4.0±.1 APP'D xlamp ® mx-6s leds 8.0±.1 1.75±.10 DATE 2.5±.1 D Cathode Side Tape and Reel All Cree carrier+.
PAGE 12
xlamp ® mx-6s leds Packaging Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Qty, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Dessicant (inside bag) Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Qty, Reel ID, PO # Humidity Indicator Card (inside bag) Label with Cree Bin Co