Datasheet
PRODUCT FAMILY DATA SHEET
Copyright © 2011-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree
logo and XLamp
®
are registered trademarks of Cree, Inc.
CLD-DS45 REV 10
Cree
®
XLamp
®
XB-D LEDs
PRODUCT DESCRIPTION
The XLamp
®
XB-D LED brings next-
generation performance, price and
size to all LED lighting applications.
The XB-D’s footprint enables
smaller designs with densely packed
arrays for better light mixing and
concentration.
The XB-D shares common footprint
and uniform package design across
all white and color congurations,
simplifying board and optical
designs for many LED systems. The
XB-D is optimized to dramatically
lower system cost in any illumination
application, from indoor and
outdoor lighting to architectural and
transportation lighting.
FEATURES
• Cree’s smallest lighting class
LED: 2.45 X 2.45 mm
• XB-D white binned @ 85 °C;
XB-D color binned @ 25 °C
• Up to 136 lm/W in cool white
(@ 85 °C, 350 mA)
• Available in white, 80-minimum
CRI white, and 70-minimum
CRI cool white, royal blue,
blue, green, amber, red-orange
& red
• 1 A maximum drive current
• Wide viewing angle: from 115°
(white) to 140° (red)
• Reow solderable - JEDEC
J-STD-020C compatible
• Unlimited oor life at
≤ 30 °C/85% RH
• Electrically neutral thermal path
• RoHS- and REACh-compliant
• UL-recognized component
(E349212)
WWW.CREE.COM/XLAMP
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
TABLE OF CONTENTS
Characteristics ......................... 2
Flux Characteristics ................... 3
Relative Spectral Power
Distribution.............................. 6
Relative Flux vs. Junction
Temperature ............................ 7
Electrical Characteristics ............ 8
Relative Flux vs. Current ........... 9
Relative Chromaticity vs.
Current ................................. 10
Relative Chromaticity vs.
Temperature .......................... 11
Typical Spatial Distribution ....... 11
Thermal Design ...................... 12
Reow Soldering
Characteristics ....................... 13
Notes .................................... 14
Mechanical Dimensions............ 15
Tape and Reel ........................ 16
Packaging .............................. 17