Datasheet
CLD-DS33 REV 2
PRODUCT FAMILY DATA SHEET
Cree
®
XLamp
®
XM-L LEDs
WWW.CREE.COM/XLAMP
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
PRODUCT DESCRIPTION
The XLamp XM-L LED is the indus-
try’s highest performance, single-
die white lighting-class LED. XLamp
XM-L is 20% more efcient than
XLamp XP-G at the same current,
and can deliver 1000 lumens with
100 lumens per Watt efcacy. The
XLamp XM-L LED offers Cree’s in-
dustry-leading features: wide view-
ing angle, symmetrical package,
unlimited oor life and electrically
neutral thermal path.
XLamp XM-L LEDs can enable LED
light into new applications that re-
quire tens of thousands of lumens,
such as high bay and high-output
area lighting. XM-L is also the ide-
al choice for lighting applications
where high light output and maxi-
mum efcacy are required, such as
LED light bulbs, outdoor lighting,
portable lighting, indoor lighting
and solar-powered lighting.
FEATURES
• Maximum drive current:
3000 mA
• Low thermal resistance:
2.5°C/W
• Maximum junction
temperature: 150°C
• Viewing angle: 125°
• Available in warm, neutral and
cool white
• ANSI-compatible chromaticity
bins
• Unlimited oor life at
≤ 30ºC/85% RH
• Reow solderable -
JEDEC J-STD-020C
• Electrically neutral thermal
path
TABLE OF CONTENTS
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Copyright © 2010-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Label with Cree Bin Code,
Qty, Lot # ......................................
10
Label with Customer Order Code, ..
10
Qty, Reel ID, PO# ..........................
10
Flux Characteristics .................... 2
Characteristics .......................... 2
Relative Spectral Power
Distribution............................... 3
Relative Flux vs. Junction
Temperature ............................. 3
Electrical Characteristics ............. 4
Thermal Design ......................... 4
Relative Flux vs. Current ............ 5
Relative Chromaticity vs. Current
and Temperature (Cool White) ..... 5
Relative Chromaticity vs. Current
and Temperature (Warm White) ... 6
Typical Spatial Distribution .......... 7
Reow Soldering Characteristics .. 8
Notes ....................................... 9
Mechanical Dimensions..............10
Tape and Reel ........................... 9
Packaging ................................10
Label with Cree Bin Code,
Qty, Lot # .................................
10
Label with Customer Order
Code, ........................................
10
Qty, Reel ID, PO# .....................
10