Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Warm white 240 lm 125 ° 2.9 V 700 mA

CLD-DS33 REV 2

PRODUCT FAMILY DATA SHEET

Cree

XLamp

XM-L LEDs

WWW.CREE.COM/XLAMP

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

PRODUCT DESCRIPTION

The XLamp XM-L LED is the indus-

try’s highest performance, single-

die white lighting-class LED. XLamp

XM-L is 20% more efcient than

XLamp XP-G at the same current,

and can deliver 1000 lumens with

100 lumens per Watt efcacy. The

XLamp XM-L LED offers Cree’s in-

dustry-leading features: wide view-

ing angle, symmetrical package,

unlimited oor life and electrically

neutral thermal path.

XLamp XM-L LEDs can enable LED

light into new applications that re-

quire tens of thousands of lumens,

such as high bay and high-output

area lighting. XM-L is also the ide-

al choice for lighting applications

where high light output and maxi-

mum efcacy are required, such as

LED light bulbs, outdoor lighting,

portable lighting, indoor lighting

and solar-powered lighting.

FEATURES

• Maximum drive current:

3000 mA

• Low thermal resistance:

2.5°C/W

• Maximum junction

temperature: 150°C

• Viewing angle: 125°

• Available in warm, neutral and

cool white

• ANSI-compatible chromaticity

bins

• Unlimited oor life at

≤ 30ºC/85% RH

• Reow solderable -

JEDEC J-STD-020C

• Electrically neutral thermal

path

TABLE OF CONTENTS

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

Label with Cree Bin Code,

Qty, Lot # ......................................

Label with Customer Order Code, ..

Qty, Reel ID, PO# ..........................

Flux Characteristics .................... 2

Characteristics .......................... 2

Relative Spectral Power

Distribution............................... 3

Relative Flux vs. Junction

Temperature ............................. 3

Electrical Characteristics ............. 4

Thermal Design ......................... 4

Relative Flux vs. Current ............ 5

Relative Chromaticity vs. Current

and Temperature (Cool White) ..... 5

Relative Chromaticity vs. Current

and Temperature (Warm White) ... 6

Typical Spatial Distribution .......... 7

Reow Soldering Characteristics .. 8

Notes ....................................... 9

Mechanical Dimensions..............10

Tape and Reel ........................... 9

Packaging ................................10

Label with Cree Bin Code,

Qty, Lot # .................................

Label with Customer Order

Code, ........................................

Qty, Reel ID, PO# .....................

Summary of content (20 pages)

PAGE 1
CLD-DS33 REV 2 PRODUCT FAMILY DATA SHEET Cree® XLamp® XM-L LEDs PRODUCT DESCRIPTION FEATURES The XLamp XM-L LED is the indus- • try’s highest performance, singledie white lighting-class LED. XLamp XM-L is 20% more efficient than XLamp XP-G at the same current, and can deliver 1000 lumens with 3000 mA • Low thermal resistance: 2.5°C/W • 100 lumens per Watt efficacy. The Maximum junction Electrical Characteristics.............. 4 Thermal Design..........................
PAGE 2
XLAMP XM-L LEDS FLUX CHARACTERISTICS (TJ = 25°C) The following table provides several base order codes for XLamp XM-L LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XM-L Binning and Labeling document. CCT Range Color Min. Max.
PAGE 3
XLAMP XM-L LEDS RELATIVE SPECTRAL POWER DISTRIBUTION Relative Radiant Power (%) 100 Relative Spectral Power 80 60 2600K -3700K CCT 3700K - 5000K CCT 40 5000K - 8300K CCT 20 0 400 450 500 550 600 650 700 750 -20 Wavelength (nm) RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 700 MA) 100% Relative Luminous Flux 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2010-2011 Inc. All rights reserved.
PAGE 4
XLAMP XM-L LEDS ELECTRICAL CHARACTERISTICS Electrical Characteristics (Tj = 25ºC) (TJ = 25°C) 3000 2800 2600 Forward Current (mA) 2400 2200 2000 1800 1600 1400 1200 1000 800 600 400 200 0 2.00 2.20 2.40 2.60 2.80 3.00 3.20 3.40 3.60 Forward Voltage (V) THERMAL DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient.
PAGE 5
XLAMP XM-L LEDS RELATIVE FLUX VS. CURRENT (TJ = 25°C) 350% Relative Luminous Flux (%) 325% 300% 275% 250% 225% 200% 175% 150% 125% 100% 75% Typical Spatial Radiation Pattern 50% 25% 0% 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 Forward Current (mA) RELATIVE CHROMATICITY VERSUS CURRENT AND TEMPERATURE (COOL WHITE) Cool White 0.020 0.015 0.010 0.005 0.000 ΔCCx -0.005 ΔCCy -0.010 -0.015 -0.020 0 500 1000 1500 2000 2500 3000 Current (mA) Warm White 0.020 0.
PAGE 6
XLAMP XM-L LEDS RELATIVE CHROMATICITY VERSUS CURRENT AND TEMPERATURE (COOL WHITE) Cool White 0.020 0.015 Cool0.010 White 0.005 0.020 0.000 0.015 -0.005 0.010 -0.010 0.005 -0.015 0.000 -0.020 ΔCCx ΔCCy -0.005 25 50 75 -0.010 100 125 150 Tsp (°C) ΔCCx ΔCCy -0.015 -0.020 White RELATIVEWarm CHROMATICITY VERSUS CURRENT TEMPERATURE (WARM WHITE) 0 500 1000 1500 AND2000 2500 3000 Current (mA) 0.020 0.015 0.010 Warm White 0.005 0.020 0.000 0.015 -0.005 0.010 -0.010 0.005 -0.015 0.000 -0.020 -0.
PAGE 7
0.000 ΔCCx -0.005 ΔCCy -0.010 -0.015 XLAMP XM-L LEDS -0.020 25 50 75 100 125 150 RELATIVE CHROMATICITY VERSUS CURRENT AND TEMPERATURE (WARM WHITE) Tsp (°C) Warm White 0.020 0.015 0.010 0.005 0.000 ΔCCx -0.005 ΔCCy -0.010 -0.015 -0.020 25 50 75 100 125 150 Tsp (°C) TYPICAL SPATIAL DISTRIBUTION Relative Luminous Intensity (%) 120 100 80 60 40 20 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Angle (º) Copyright © 2010-2011 Inc. All rights reserved.
PAGE 8
XLAMP XM-L LEDS REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp XM-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder 3°C/second max.
PAGE 9
XLAMP XM-L LEDS NOTES Lumen Maintenance Projections Cree currently recommends a maximum drive current of 1500 mA for XLamp XM-L white in designs seeking the ENERGY STAR* 35,000 hour lifetime rating (≥ 94.1% luminous flux @ 6000 hours) or 25,000-hour lifetime rating (≥ 91.8% luminous flux @ 6000 hours). Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
PAGE 10
4.8 C XLAMP XM-L LEDS MECHANICAL DIMENSIONS All measurements are ±.13 mm unless otherwise indicated. 4.7 3.9 0.6 B 6 5 4 NOTICE 6 CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION 4.7 NOTICE CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT THIS PLOT AND THE INFORMATION CONTAINED WITHINTO ARE THE PROPRIETARY AND MAY NOT BE COPIED, REPRODUCED OR DISCLOSED ANY CONFIDENTIAL OF CREE, INC.
PAGE 11
XLAMP XM-L LEDS 6 5 4 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND NOTICE CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION NOTICE MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE UNAUTHORIZED PERSON WITHOUT THEINFORMATION WRITTEN CONSENT CONFIDENTIAL INFORMATION CREE, INC.
PAGE 12
Dessicant Desiccant XLAMP XM-L LEDS (inside bag) (inside bag) Humidity Indicator Humidity Indicator Card (inside bag)bag) (inside PACKAGING Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label Bin with Cree Bin CREE Code & Barcode Label Code, Qty, Lot # Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Label with Customer P/N, Qty, Lot #, PO## Code, Qty, Lot Label with Cree Bin
PAGE 13
CLD-AP44 REV 1 BINNING & LABELING Cree® XLamp® XM-L LED INTRODUCTION TABLE OF CONTENTS This document describes the product nomenclature re- Bin and Order-Code Format................................... 2 quired to select and order Cree’s XLamp XM-L LEDs. Performance Groups – Brightness........................... 2 XLamp XM-L LEDs are tested and sorted into bins which Performance Groups – Chromaticity........................
PAGE 14
XLAMP XM-L LED BINNING & LABELING BIN AND ORDER-CODE FORMAT Bin codes and order codes are configured in the following manner: Order Code Bin Code Series XMLA = XM-L Series XMLA = XM-L Internal code Internal code Luminous flux group SSSSCC-BD-HHHH-NNNNNNNNN SSSSCC-B-WWW-FFF-GG-AAAA Kit number Color WT = White Internal code Chromaticity group Color WT = White PERFORMANCE GROUPS – BRIGHTNESS XLamp XM-L LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Gro
PAGE 15
XLAMP ML FAMILY LEDS BINNING & LABELING, REV 1 PERFORMANCE GROUPS – CHROMATICITY Region 0A 0R 1A 1R 2A 2R 3A 3R 4A 4R x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 Region x y 0.2920 0.3060 x y 0.2984 0.3133 0.2895 0.3135 0.2962 0.3220 0.2962 0.3220 0.3028 0.3304 0.3042 0.2984 0.3133 0.3048 0.3207 0.2980 0.2880 0.2950 0.2970 0.2895 0.3135 0.2962 0.2870 0.3210 0.2937 0.3009 0.3042 0.3037 0.2937 0.2937 0.3312 0.3005 0.3415 0.2962 0.3220 0.
PAGE 16
XLAMP ML FAMILY LEDS BINNING & LABELING, REV 1 PERFORMANCE GROUPS – CHROMATICITY (CONTINUED) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 Region x y 0.3686 0.3649 x y 0.3744 0.3685 x y 0.3726 0.3612 0.3702 0.3722 0.3763 0.3760 0.3763 0.3760 0.3825 0.3798 0.3744 0.3685 0.3804 0.3721 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646 0.3702 0.3722 0.3719 0.3797 0.3719 0.3797 0.3736 0.3874 0.3782 0.
PAGE 17
XLAMP ML FAMILY LEDS BINNING & LABELING, REV 1 PERFORMANCE GROUPS – CHROMATICITY (CONTINUED) Region 7B1 7C1 7D1 8A1 8B1 8C1 8D1 x y 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 0.4006 0.4342 0.4385 0.4449 0.4141 0.4403 0.4049 0.4259 0.3853 0.4300 0.3939 0.4359 0.3960 0.4316 0.4373 0.4418 0.3981 0.4475 0.3994 0.4428 0.3906 0.4465 0.4513 0.4573 0.4178 0.4523 0.4582 0.4634 0.4193 0.4695 0.4207 0.4641 Region x y 0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.
PAGE 18
XLAMP XM-L LED BINNING & LABELING CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE ANSI Cool White 0.40 5000K 0.39 0.38 5700K 3S 0.37 6500K 2T 0.36 0.35 2C 1T 8000K CCy 3B 2S 0T 0.33 0C 3R 2A 1D 2U ANSI C78.377A 2R 1A 0B 0.31 2D 1C 1B 0S 0.32 3A 2B 1S 0.34 1U 0D 1R 0A 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx ANSI Neutral and Warm White 0.46 0.45 2700K 3000K 0.44 0.43 3500K 0.42 4000K 0.
PAGE 19
XLAMP XM-L LED BINNING & LABELING The following tables of order codes list flux minimums and chromaticity regions for XLamp XM-L LEDs. For other flux and chromaticity combinations, contact Cree or an authorized distributor. STANDARD ORDER CODES AND BINS (XM-L ANSI COOL WHITE) XLamp XM-L LED Standard Order Codes - White Min.
PAGE 20
XLAMP XM-L LED BINNING & LABELING STANDARD ORDER CODES AND BINS (XM-L ANSI WARM WHITE) XLamp XM-L LED Standard Order Codes - White Min.