Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Neutral white 13 W 430 lm 115 ° 12 V 1000 mA

CLD-DS93 REV 0

PRODUCT FAMILY DATA SHEET

Cree

XLamp

XM-L2 EasyWhite

LEDs

WWW.CREE.COM/XLAMP

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

PRODUCT DESCRIPTION

The XLamp XM-L2 EasyWhite LED

eliminates chromaticity binning

and enables luminaire and bulb

manufacturers to deliver the

consistent color and high efcacy

light output of a multi-die LED in

the compact XM-L footprint. XLamp

XM-L2 EasyWhite LEDs can reduce

LED-to-LED color variation to within

a 2-step MacAdam ellipse, 94%

smaller than the total area of the

corresponding ANSI C78.377 color

region.

The XLamp XM-L2 EasyWhite

LED is the perfect choice for

lighting applications where high

luminous ux output is required

from a single, small point source.

Example applications include LED

retrot bulbs, commercial/retail

display spotlights, and other indoor

general-illumination applications.

FEATURES

• Available in 4-step and 2-step

EasyWhite bins at 2700 K,

3000 K, 3500 K, 4000 K, 5000 K

CCT, ANSI white bins at 5700 K,

6500 K

• Wide range of operating

current – up to 2 A @ 6 V or 1 A

@ 12 V

• 85 °C binning and

characterization

• Available in 6-V and 12-V

versions

• Low thermal resistance:

2.5 °C/W

• Wide viewing angle: 115°

• Wide variety of CRI choices:

standard CRI as well as 80- &

90-minimum CRI

• Electrically neutral thermal path

• Unlimited oor life at

≤ 30 ºC/85% RH

• Reow solderable - JEDEC

J-STD-020C

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

the Cree logo, XLamp

and EasyWhite

are registered trademarks of Cree, Inc.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.407.5300

TABLE OF CONTENTS

Characteristics ............................... 2

Flux Characteristics, Standard Order

Codes and Bins, 6-V XM-L2 EZW ....... 3

Flux Characteristics, Standard Order

Codes and Bins, 12-V XM-L2 EZW ..... 5

Relative Spectral Power

Distribution.................................... 8

Relative Flux vs. Junction

Temperature .................................. 8

Electrical Characteristic ................... 9

Relative Flux vs. Current ............... 10

Relative Chromaticity vs. Current

and Temperature .......................... 11

Typical Spatial Distribution ............. 12

Thermal Design ............................ 12

Performance Groups – Brightness ... 13

Performance Groups – Chromaticity 13

Cree EasyWhite Bins Plotted on the

1931 CIE Color Space ................... 14

Cree’s Standard Cool White Kits

Plotted on ANSI Standard

Chromaticity Regions .................... 15

Cree ANSI White Bins Plotted on the

1931 CIE Color Space ................... 15

Bin and Order Code Format ............ 16

Reow Soldering Characteristics ..... 17

Notes .......................................... 18

Mechanical Dimensions.................. 19

Tape and Reel .............................. 20

Packaging .................................... 21

Summary of content (21 pages)

PAGE 1
Cree® XLamp® XM-L2 EasyWhite® LEDs CLD-DS93 Rev 0 Product family data sheet Product Description FEATURES Table of Contents The XLamp XM-L2 EasyWhite LED • Available in 4-step and 2-step Characteristics................................ 2 eliminates chromaticity binning EasyWhite bins at 2700 K, Flux Characteristics, Standard Order and enables luminaire and bulb 3000 K, 3500 K, 4000 K, 5000 K Codes and Bins, 6-V XM‑L2 EZW........
PAGE 2
xlamp xm-l2 easywhite leds Characteristics Characteristics Unit Thermal resistance, junction to solder point °C/W 2.5 Viewing angle (FWHM) Minimum Typical degrees 115 Temperature coefficient of voltage (6 V) mV/°C -5 Temperature coefficient of voltage (12 V) mV/°C -10 ESD withstand voltage (HBM per Mil-Std-883D) Maximum V 8000 DC forward current (6 V) mA 2000 DC forward current (12 V) mA 1000 Reverse current (6 V, 12 V) mA 0.1 Forward voltage (@ 700 mA, 85 °C, 6 V) V 5.8 6.
PAGE 3
xlamp xm-l2 easywhite leds Flux Characteristics, Standard Order Codes and Bins, 6-V XM‑L2 EZW (700 mA, Tj = 85 °C) The following table provides the order codes for 6-volt XLamp XM-L2 EZW LEDs. Color CCT Range 5000 K 4000 K Standard CRI EasyWhite 3500 K 3000 K 2700 K Base Order Codes Min.
PAGE 4
xlamp xm-l2 easywhite leds Flux Characteristics, Standard Order Codes and Bins, 6-V XM‑L2 EZW (700 mA, Tj = 85 °C) - Continued Color CCT Range Base Order Codes Min.
PAGE 5
xlamp xm-l2 easywhite leds Flux Characteristics, Standard Order Codes and Bins, 6-V XM‑L2 EZW (700 mA, Tj = 85 °C) - Continued Color Base Order Codes Min Luminous Flux @ 700 mA CCT Range 6500 K Standard CRI ANSI White 5700 K Chromaticity Regions Order Code Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* U6 380 443 V2 400 466 V3 420 486 XMLBEZ-00-0000-0B00V30E1 U6 380 443 XMLBEZ-00-0000-0B00U60E2 V2 400 466 V3 420 486 XMLBEZ-00-0000-0B00U60E1 0E1 XMLBEZ-00-0000-0B00V20E1 0E2 XMLBE
PAGE 6
xlamp xm-l2 easywhite leds Flux Characteristics, Standard Order Codes and Bins, 12-V XM‑L2 EZW (350 ma, TJ = 85 °C) - cONTINUED Color CCT Range Base Order Codes Min.
PAGE 7
xlamp xm-l2 easywhite leds Flux Characteristics, Standard Order Codes and Bins, 12-V XM‑L2 EZW (350 ma, TJ = 85 °C) - cONTINUED Color Base Order Codes Min Luminous Flux @ 700 mA CCT Range 6500 K Standard CRI ANSI White 5700 K Chromaticity Regions Order Code Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* U6 380 443 V2 400 466 V3 420 486 XMLBEZ-00-0000-0D00V30E1 U6 380 443 XMLBEZ-00-0000-0D00U60E2 V2 400 466 V3 420 486 XMLBEZ-00-0000-0D00U60E1 0E1 0E2 XMLBEZ-00-0000-0D00V20E1 XMLB
PAGE 8
xlamp xm-l2 easywhite leds Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power 100% 80% 60% Cool White Warm White 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (6-V - IF = 700 mA; 12-V - IF = 350 mA) Relative Luminous Flux 120% 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2010 Cree, Inc.
PAGE 9
xlamp xm-l2 easywhite leds Electrical Characteristics Electrical Characteristics (TJ = 85 °C) 2000 Forward Current (mA) 1750 1500 1250 XM-L2 EZW, 6V 1000 750 500 250 0 5.4 5.5 5.6 5.7 Electrical Characteristics 5.8 5.9 6.0 6.1 6.2 6.3 Forward Voltage (V) Forward Current (mA) 1000 750 XM-L2 EZW, 12V 500 250 0 10.8 11.0 11.2 11.4 11.6 11.8 12.0 12.2 12.4 12.6 Forward Voltage (V) Copyright © 2010 Cree, Inc. All rights reserved.
PAGE 10
xlamp xm-l2 easywhite leds Flux vs. Current Relative Flux vs. Current (TJ = 85°C) 225% Relative Luminous Flux 200% 175% 150% 125% XM-L2 EZW, 6V 100% 75% 50% 25% 0% 0 250 500 750 1000 1250 1500 1750 2000 Forward Current (mA) Flux vs. Current 225% Relative Luminous Flux 200% 175% 150% 125% XM-L2 EZW, 12V 100% 75% 50% 25% 0% 0 200 400 600 800 1000 Forward Current (mA) Copyright © 2010 Cree, Inc. All rights reserved.
PAGE 11
xlamp xm-l2 easywhite leds XM-L2 EZW 6V Relative Chromaticity vs. Current and Temperature XM-L2 EZW, 6 V 0.005 0.004 0.003 0.002 0.001 0.000 -0.001 -0.002 -0.003 -0.004 -0.005 -0.006 -0.007 ΔCCx ΔCCy 0 500 1000 1500 2000 Current (mA) XM-L2 EZW 12V XM-L2 EZW, 12 V 0.005 0.004 0.003 0.002 0.001 0.000 -0.001 ΔCCx -0.002 ΔCCy -0.003 -0.004 -0.005 -0.006 -0.007 0 200 400 600 800 1000 Current (mA) XM-L2 EZW, 6V, 12V XM-L2 EZW, 6 V & 12 V 0.005 0.004 0.003 0.002 0.001 0.000 -0.
PAGE 12
xlamp xm-l2 easywhite leds Typical Spatial Radiation Pattern Typical Spatial Distribution Relative Luminous Intensity 100% 80% 60% 40% 20% -100 -80 -60 -40 -20 0% 0 20 40 60 80 100 Angle (º) Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient.
PAGE 13
xlamp xm-l2 easywhite leds Performance Groups – Brightness (TJ = 85 °C) XLamp XM-L2 EasyWhite LEDs are tested for luminous flux and placed into one of the following bins. Group Code Min. Luminous Flux @ 700 mA, 6 V, @ 350 mA , 12 V Max.
PAGE 14
xlamp xm-l2 easywhite leds Performance Groups - Chromaticity (Tj = 85 °C) - Continued ANSI White Bins Code CCT Bin Code 1A0 1B0 0E1 6500 K 1C0 1D0 ANSI White Bins x y 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 Code Bin Code CCT 2A0 x y 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3068 0.3113 0.3222 0.3243 0.3028 0.3304 0.3207 0.3462 0.3115 0.3391 0.3290 0.3538 0.3130 0.3290 0.3290 0.3417 0.3048 0.3207 0.3115 0.3391 0.3205 0.3481 0.3213 0.
PAGE 15
xlamp xm-l2 easywhite leds Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 5000K 0.39 0.38 5700K E2 0.37 3S 6500K 0.36 2T E1 0.35 2C 1T CCy 8000K 3A 2B 0.34 1S 0T 0.33 0S 0.32 3B 2S 0B 0.31 1D 2U ANSI C78.377A 2R 1A 1U 0D 0A 3R 2A 1B 0C 2D 1C 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Cree ANSI White Bins Plotted on the 1931 CIE Color Space (TJ = 85 °C) 0.40 0.39 ANSI C76.377 Quadrangle 0.
PAGE 16
xlamp xm-l2 easywhite leds Bin and Order Code Format Bin codes and order codes are configured as follows: Order Code Bin Code SSSCCC-BB-HHHH-NNNNNNNNN Series XML = XM-L Series XML = XM-L Internal code Internal code Internal code Flux bin Kit code Internal code Vf class: B = 6-V class D = 12-V class SSSCCC-B-WWW-FFF-GAAAAAA Vf class: B = 6-V class D = 12-V class Reel size 0 = 1000 (standard) Chromaticity bin Color BEZ = XM-L2 EasyWhite Color BEZ = XM-L2 EasyWhite Copyright © 2010 Cr
PAGE 17
xlamp xm-l2 easywhite leds Reflow Soldering Characteristics In testing, Cree has found XLamp XM-L2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder 3 °C/second max.
PAGE 18
xlamp xm-l2 easywhite leds Notes Lumen Maintenance Projections Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document at www.cree.com/xlamp_app_notes/LM80_results. Please consult the XLamp Long-Term Lumen Maintenance application note at www.cree.
PAGE 19
4.8 C xlamp xm-l2 easywhite leds 2.26 Mechanical Dimensions 4.7 3.9 All measurements are ±.13 mm unless otherwise indicated. 6 6 5 B 4 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND 6 CONFIDENTIAL INFORMATION OF CREE, INC. 5 THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY NOTICE 4.7 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC.
PAGE 20
6 5 4 3 REVISIONS 4.00[.157] DESCRIPTION REV BY DATE APP'D POCKET SIZE D 2.00[.079] 1 2 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. Do1.50 P2 +.10 +.0039 .0591 -.00 -.0000 [ ] 1.75[.069] E1 Po Tape and Reel Ao - 5.40mm [.213"] Bo - 5.40mm [.213"] Ko - 3.35mm [.132"] 3.
PAGE 21
xlamp xm-l2 easywhite leds Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Qty, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Qty, Reel ID, PO # Label with Cree Bin Code, Qty, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Qty, Reel ID, PO # Patent Label Label with Cree Bin Code, Qty, Reel ID Patent Label Copyright © 201