Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Cold white 10 W 310 lm 125 ° 2.85 V 3000 mA

Binning & LaBeLing

, the Cree logo and

XLamp

are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specication. For

product specications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

WWW.CREE.COM/XLAMP

CLD-AP44 REV 9

Cree

XLamp

XM Family LEDs

INTRODUCTION

This document describes the product nomenclature required

to select and order Cree’s XLamp

XM family of LEDs. XLamp

XM family LEDs are tested and sorted into bins which are then

combined into orderable kits identied by an order code.

All XLamp LEDs are tested and sorted by color and brightness

into a unique bin. Each bin contains LEDs from only one color

and brightness group and is uniquely identied by a bin code.

White XLamp LEDs are sorted by chromaticity (color) and

luminous ux (brightness). High Voltage White XLamp LEDs

are sorted by chromaticity, luminous ux and voltage. LEDs are

shipped on reels containing LEDs from one bin and are always

labeled with the appropriate bin code.

Kits contain LEDs from a number of similar bins and are fully

dened by their order codes. A full explanation of the order

codes for XLamp XM family LEDs, as well as a list of standard

order codes, is provided in this document.

TABLE OF CONTENTS

Introduction ....................................................................................1

Bin and Order Code Formats .........................................................2

Performance Groups – Luminous Flux.........................................3

Performance Groups – Chromaticity ............................................4

Performance groups – Voltage ..................................................... 6

Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE

Curve ...............................................................................................7

Cree’s Standard Cool White Kits Plotted on ANSI Standard

Chromaticity Regions ....................................................................9

Cree’s Standard Warm and Neutral White Kits Plotted on ANSI

Standard Chromaticity Regions ..................................................10

Cree’s Standard Chromaticity Kits ..............................................12

Standard Order Codes and Bins

XM-L ANSI Cool White .........................................................13

XM-L ANSI Neutral White .....................................................14

XM-L ANSI Warm White .......................................................15

XM-L2 ANSI Cool White .......................................................16

XM-L2 ANSI Neutral White ...................................................17

XM-L2 ANSI Warm White .....................................................18

XM-L High Voltage ANSI Cool White ...................................20

XM-L High Voltage ANSI Neutral White ..............................21

XM-L High Voltage ANSI Warm White .................................22

Summary of content (22 pages)

PAGE 1
CLD-AP44 Rev 9 Binning & Labeling Cree® XLamp® XM Family LEDs Table of Contents Introduction Introduction.....................................................................................1 This document describes the product nomenclature required Bin and Order Code Formats..........................................................2 to select and order Cree’s XLamp® XM family of LEDs. XLamp Performance Groups – Luminous Flux.........................................
PAGE 2
XLamp ® XM Family LED Binning & Labeling Bin and Order Code Formats Bin codes and order codes for XM-L and XM-L2 White LEDs are configured in the following manner: Order Code Bin Code Series XMLA = XM-L XMLB = XM-L Gen 2 Series XMLA = XM-L XMLB = XM-L Gen 2 Internal code Internal code Luminous flux group Luminous flux group SSSSCC-BD-HHHH-NNNGFFWWW Color specification L = White 0 = Cool White B = 70 CRI minimum H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum Chromaticity group Color speci
PAGE 3
XLamp ® XM Family LED Binning & Labeling Performance Groups – Luminous Flux XLamp XM-L and XM-L2 White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code Min. Luminous Flux @ 700 mA (lm) Max.
PAGE 4
XLamp ® XM Family LED Binning & Labeling Performance Groups – Chromaticity Region 0A 0R 1A 1R 2A 2R 3A 3R 4A 4R x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.2980 0.2950 0.2970 0.3009 0.3042 0.3037 0.2937 0.3048 0.3130 0.3144 0.3186 0.3068 0.3068 0.3144 0.3186 0.3161 0.3059 0.3093 Region x y 0.2920 0.3060 x y 0.2984 0.3133 0.2895 0.3135 0.2962 0.3220 0.2962 0.3220 0.3028 0.3304 0.3042 0.2984 0.2880 0.2895 0.3133 0.3048 0.3135 0.2962 0.
PAGE 5
XLamp ® XM Family LED Binning & Labeling Performance Groups – Chromaticity (Continued) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 7B1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 0.3702 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 Region x y 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3612 0.3744 0.3722 0.3719 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 5A2 5B2 Region x y 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3685 0.3804 0.3797 0.3782 0.
PAGE 6
XLamp ® XM Family LED Binning & Labeling Performance Groups – Chromaticity (Continued) Region 7C1 7D1 8A1 8B1 8C1 8D1 x y Region x y 0.4385 0.4119 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4430 0.4212 0.4496 0.4236 0.4403 0.4259 0.4049 0.4449 0.3853 0.4300 0.4300 0.3939 0.4342 0.4028 0.4359 0.3960 0.4316 0.3873 0.4403 0.4049 0.4359 0.3960 0.4373 0.4418 0.3893 0.4418 0.3981 0.4465 0.4475 0.3994 0.4428 0.3906 0.4523 0.4085 0.4475 0.3994 0.4465 0.
PAGE 7
XLamp ® XM Family LED Binning & Labeling Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 3S 0.37 6500 K 2T 0.36 0.35 CCy 3B 2S 2C 1T 8000 K 0T 0.33 0C 0B 0.31 3R 2A 1D 2U ANSI C78.377A 2R 1A 1U 0D 0A 0.30 2D 1C 1B 0S 0.32 3A 2B 1S 0.34 1R 0U 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Neutral White 0.44 0.43 3500 K 6T 0.42 4000 K 0.41 5T 0.40 5S 5000 K 0.
PAGE 8
XLamp ® XM Family LED Binning & Labeling Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve - continued ANSI Neutral White and ANSI warm white 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K CCy 0.41 6C3 4500 K 6C2 6B3 0.40 6B2 5C3 5000 K 0.39 5B3 5B1 4C 0.37 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8A3 8A2 8A4 4D 8D1 8B4 8D2 8C2 8C1 8C3 8C4 8D3 8D4 6D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 0.
PAGE 9
XLamp ® XM Family LED Binning & Labeling Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 3S 51 6500 K 0.36 8000 K 6500 K 0T 0C 0B 0A 1U 1R 0U CCy 0.36 0.34 0.28 0.35 0.34 0.33 0.32 0.31 0.30 0.33 0.28 0.36 0.28 0.35 0R 0.29 CCx CCx 0.40 0.40 5000 K 0.39 0.38 0.38 0.36 0.36 2C 1S 0T 0.33 0S 0.32 0B 0.31 1C 0A 1D 2U 0S 0C 3R 2A 1D 2U ANSI C78.377A 2R 1A 1U 0D 0A 1R 3A 2D 1C 1B 0B 0.
PAGE 10
XLamp ® XM Family LED Binning & Labeling Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 4000 K 0.41 E6 4500 K E5 0.40 CCy E7 3500 K 5000 K 0.39 0.38 E3 0.37 E4 5B1 5D3 6D4 7A4 7A1 8B3 8C1 8B4 8C2 8C3 8C4 8D3 8D2 8D4 6A4 6A1 5D4 5D1 ANSI C78.377A 5A4 3B 8B2 6D1 5D2 5A2 3C 5A1 4D 0.
PAGE 11
XLamp ® XM Family LED Binning & Labeling Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Continued 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 Z6 4000 K 0.41 Z5 4500 K 0.40 CCy Z7 3500 K 0.39 5B3 5B1 4C 0.37 6D4 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8B1 7C4 8A2 8A4 8A3 8D1 4D 8B2 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 3B 5D3 7A2 6D3 6D2 6A3 6A2 5D2 5A3 5A2 4B 6B1 5C4 5C1 5B4 0.
PAGE 12
XLamp ® XM Family LED Binning & Labeling Cree’s Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits.
PAGE 13
XLamp ® XM Family LED Binning & Labeling The following tables of order codes list flux minimums and chromaticity regions for XLamp XM family LEDs. For other flux and chromaticity combinations, contact Cree or an authorized distributor.
PAGE 14
XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L ANSI Neutral White, TJ = 25 °C) XLamp XM-L LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 700 mA* Code Flux (lm) Order Codes 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K – 5000 K) E3 F4 4750 K E4 4500 K F5 E5 Z5 * 5000 K 4250 K 4000 K 4000 K T6 280 XMLAWT-00-0000-000LT60E3 T5 260 XMLAWT-00-0000-000LT50E3 T4 240 XMLAWT-00-0000-000LT40E3 T5 260 XMLAWT-00-000
PAGE 15
XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L ANSI Warm White, TJ = 25 °C) XLamp XM-L LED Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 700 mA* Kit Code Flux (lm) 80 CRI Typical T4 240 XMLAWT-00-0000-000LT40F6 XMLAWT-00-0000-000HT40F6 T3 220 XMLAWT-00-0000-000LT30F6 XMLAWT-00-0000-000HT30F6 T2 200 XMLAWT-00-0000-000LT20F6 XMLAWT-00-0000-000HT20F6 T4 240 XMLAWT-00-0000-000LT40E6 XMLAWT-00-0000-000HT40E6 T3 220 XMLAWT-00-0000-000LT
PAGE 16
XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L2 ANSI Cool White, TJ = 85 °C) XLamp XM-L2 LED Standard Order Codes - White Chromaticity Minimum Luminous Flux (lm) @ 700 mA* Kit Code CCT Flux (lm) Order Codes 65 CRI Typical 85 CRI Minimum ANSI Cool White (5000 K – 8300 K) 51 53 50 E1 E2 * 6200 K 6000 K 6200 K 6500 K 5700 K U3 320 XMLBWT-00-0000-0000U3051 U2 300 XMLBWT-00-0000-0000U2051 T6 280 XMLBWT-00-0000-0000T6051 T5 260 XMLBWT-00-0000-0000T5051
PAGE 17
XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L2 ANSI Neutral White, TJ = 85 °C) XLamp XM-L2 LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 700 mA* Code Flux (lm) Order Codes 70 CRI Minimum 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K – 5000 K) E3 F4 E4 F5 E5 Z5 * 5000 K 4750 K 4500 K 4250 K 4000 K 4000 K U3 320 XMLBWT-00-0000-000BU30E3 U2 300 XMLBWT-00-0000-000BU20E3 XMLBWT-00-0000-000LU20E3 T6 280 XML
PAGE 18
XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L2 ANSI Warm White, TJ = 85 °C) XLamp XM-L2 LED Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 700 mA* Kit Code CCT Flux (lm) Order Codes 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XMLBWT-00-0000-000PT20E7 XMLBWT-00-0000-000UT20E7 ANSI Warm White (2700 K - 3750 K) F6 E6 Z6 F7 E7 Z7 * 3750 K 3500 K 3500 K 3250 K 3000 K 3000 K T6 280 XMLBWT-00-0000-000LT60F6 XMLBWT-00
PAGE 19
XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L2 ANSI Warm White, TJ = 85 °C) - Continued XLamp XM-L2 LED Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 700 mA* Kit Code Flux (lm) 80 CRI Typical T5 260 XMLBWT-00-0000-000LT50F8 XMLBWT-00-0000-000HT50F8 T4 240 XMLBWT-00-0000-000LT40F8 XMLBWT-00-0000-000HT40F8 CCT Order Codes 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XMLBWT-00-0000-000PS60F8 XMLBWT-00-0000-000US60F8 XMLBWT-00-0000-000US5
PAGE 20
XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L High Voltage ANSI Cool White, TJ = 85 °C) XLamp XM-L HVW LED Standard Order Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 44 mA* Code Flux (lm) Order Codes 65 CRI Typical ANSI Cool White (5000 K – 8300 K) 51 53 50 * 6200 K 6000 K 6200 K T5 260 XMLHVW-Q0-0000-0000LT551 T4 240 XMLHVW-Q0-0000-0000LT451 T3 220 XMLHVW-Q0-0000-0000LT351 T2 200 XMLHVW-Q0-0000-0000LT251 T5 260 XMLHVW-Q0-0000-00
PAGE 21
XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L High Voltage ANSI Neutral White, TJ = 85 °C) XLamp XM-L HVW LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 44 mA* Code Flux (lm) Order Codes 75 CRI Typical 80 CRI Minimum ANSI Neutral White (3700 K – 5000 K) E3 F4 E4 F5 E5 * 5000 K 4750 K 4500 K 4250 K 4000 K T5 260 XMLHVW-Q0-0000-0000LT5E3 T4 240 XMLHVW-Q0-0000-0000LT4E3 T3 220 XMLHVW-Q0-0000-0000LT3E3 T2 200 XMLHVW-Q
PAGE 22
XLamp ® XM Family LED Binning & Labeling Standard Order Codes and Bins (XM-L High Voltage ANSI Warm White, TJ = 85 °C) XLamp XM-L HVW LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 44 mA* Code Flux (lm) Order Codes 80 CRI Typical 80 CRI Minimum ANSI Warm White (2700 K - 3750 K) F6 E6 F7 E7 F8 E8 * 3750 K 3500 K 3250 K 3000 K 2850 K 2700 K T3 220 XMLHVW-Q0-0000-0000LT3F6 T2 200 XMLHVW-Q0-0000-0000LT2F6 XMLHVW-Q0-0000-0000HT2F6 S6 182 XMLHVW-Q0-0