Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Warm white 13 W 290 lm 115 ° 6 V 2000 mA

CLD-DS38 REV 7

PRODUCT FAMILY DATA SHEET

Cree

XLamp

XM-L EasyWhite

LEDs

WWW.CREE.COM/XLAMP

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

PRODUCT DESCRIPTION

The XLamp

XM-L EasyWhite

(EZW) LED eliminates chromaticity

binning, and enables luminaire and

bulb manufacturers to deliver the

consistent color and high efcacy

light output of a multi-die LED in

the compact XM-L footprint. XLamp

XM-L EasyWhite LEDs can reduce

LED-to-LED color variation to within

a 2-step MacAdam ellipse, 94%

smaller than the total area of the

corresponding ANSI C78.377 color

region.

The XLamp XM-L EasyWhite LED

is the perfect choice for lighting

applications where moderate to high

luminous ux output is required

from a single, small point source.

Example applications include: LED

retrot bulbs, commercial/retail

display spotlights, and other indoor

general-illumination applications.

FEATURES

• Available in 4-step and 2-step

EasyWhite bins at 2700 K,

3000 K, 3500 K, 4000 K, 5000 K

CCT

• Wide range of operating

current – up to 2 A @ 6 V

• 85 °C binning and

characterization

• Available in 6-V and 12-V

versions

• Low thermal resistance:

2.5 °C/W

• Wide viewing angle: 115°

• Wide variety of CRI choices:

standard CRI as well as 80-,

85-, 90-minimum CRI

• Electrically neutral thermal path

• Unlimited oor life at

≤ 30 ºC/85% RH

• Reow solderable - JEDEC

J-STD-020C

• RoHS- and REACh-compliant

• UL-recognized component

(E349212)

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Cree

, the Cree logo, XLamp

and EasyWhite

are registered trademarks of Cree, Inc.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

TABLE OF CONTENTS

Characteristics ............................ 2

Flux Characteristics, Standard

Order Codes and Bins, 6-Volt

XM-L EZW .................................. 3

Flux Characteristics, Standard

Order Codes and Bins, 12-Volt

XM-L EZW ................................. 6

Relative Spectral Power

Distribution................................. 9

Relative Flux vs. Junction

Temperature ............................... 9

Electrical Characteristics ..............10

Relative Flux vs. Current .............11

Relative Chromaticity vs. Current

and Temperature ........................12

Typical Spatial Distribution ........... 13

Thermal Design ..........................13

Performance Groups – Brightness .14

Performance Groups –

Chromaticity ..............................15

Cree EasyWhite Bins Plotted on

the 1931 CIE Color Space ............16

Cree ANSI White Bins Plotted on

the 1931 CIE Color Space ............16

Bin and Order Code Format ..........17

Reow Soldering Characteristics ...18

Notes ........................................ 19

Mechanical Dimensions................21

Tape and Reel ............................22

Packaging .................................. 23

Summary of content (23 pages)

PAGE 1
Cree® XLamp® XM-L EasyWhite® LEDs Product Description The XLamp ® XM-L EasyWhite ® FEATURES Table of Contents • Available in 4-step and 2-step Characteristics.............................
PAGE 2
xlamp ® xm-l easywhite ® leds Characteristics Characteristics Unit Thermal resistance, junction to solder point °C/W Viewing angle (FWHM) Minimum Typical 2.5 degrees 115 Temperature coefficient of voltage (6 V) mV/°C -6.0 Temperature coefficient of voltage (12 V) mV/°C -12.0 ESD withstand voltage (HBM per Mil-Std-883D) Maximum V 8000 DC forward current (6 V) mA 2000 DC forward current (12 V) mA 1000 Reverse current (6 V, 12 V) mA -0.
PAGE 3
xlamp ® xm-l easywhite ® leds Flux Characteristics, Standard Order Codes and Bins, 6-Volt XM-L EZW (700 mA, Tj = 85 °C) The following table provides the order codes for 6-Volt XLamp XM-L EZW LEDs. Color CCT Range 5000 K 4000 K Standard CRI EasyWhite 3500 K 3000 K 2700 K Base Order Codes Min.
PAGE 4
xlamp ® xm-l easywhite ® leds Flux Characteristics, Standard Order Codes and Bins, 6-Volt XM-L EZW (700 mA, Tj = 85 °C) - Continued Color CCT Range Base Order Codes Min.
PAGE 5
xlamp ® xm-l easywhite ® leds Flux Characteristics, Standard Order Codes and Bins, 6-Volt XM-L EZW (700 mA, Tj = 85 °C) - Continued CCT Range Color 3000 K 90-CRI Minimum EasyWhite 2700 K Color ANSI White Base Order Codes Min.
PAGE 6
xlamp ® xm-l easywhite ® leds Flux Characteristics, Standard Order Codes and Bins, 12-Volt XM-L EZW (350 ma, TJ = 85 °C) The following table provides the order codes for 12-Volt XLamp XM-L EZW LEDs. Color CCT Range 5000 K 4000 K Standard CRI EasyWhite 3500 K 3000 K 2700 K Base Order Codes Min.
PAGE 7
xlamp ® xm-l easywhite ® leds Flux Characteristics, Standard Order Codes and Bins, 12-Volt XM-L EZW (350 ma, TJ = 85 °C) - Continued Color CCT Range 4000 K 3500 K 80-CRI Minimum EasyWhite 3000 K 2700 K 3000 K 85-CRI Minimum EasyWhite 2700 K Base Order Codes Min.
PAGE 8
xlamp ® xm-l easywhite ® leds Flux Characteristics, Standard Order Codes and Bins, 12-Volt XM-L EZW (350 ma, TJ = 85 °C) - Continued CCT Range Color 3000 K 90-CRI Minimum EasyWhite 2700 K Color ANSI White Base Order Codes Min.
PAGE 9
xlamp ® xm-l easywhite ® leds Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power (%) 100 80 60 5000 K CCT 3000 K CCT 40 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature Relative Flux vs.
PAGE 10
xlamp ® xm-l easywhite ® leds Electrical Characteristics (Tj = 85ºC) Electrical Characteristics (TJ = 85 °C) 2000 Forward Current (mA) 1750 1500 1250 1000 XM-L EZW 6V 750 500 250 0 5.20 5.40 5.60 5.80 6.00 6.20 6.40 Forward Voltage (V) Forward Current (mA) 1000 750 500 XM-L EZW 12V 250 0 10.00 10.50 11.00 11.50 12.00 12.50 13.00 Forward Voltage (V) ® ® ® Copyright © 2010 2011-2014 Cree,AllInc. All rights reserved.
PAGE 11
xlamp ® xm-l easywhite ® leds Relative LF vs. IFlux @ 85 vs. Current (TJ = 85°C) Relative Luminous Flux (%) 225% 200% 175% 150% 125% XM-L EZW 6V 100% 75% 50% 25% 0% 0 250 500 750 1000 1250 1500 1750 2000 Forward Current (mA) Relative Luminous Flux (%) 225% 200% 175% 150% 125% XM-L EZW 12V 100% 75% 50% 25% 0% 0 200 400 600 800 1000 Forward Current (mA) ® ® ® Copyright © 2010 2011-2014 Cree,AllInc. All rights reserved.
PAGE 12
xlamp ® xm-l easywhite ® leds XM-L EZW 6V Relative Chromaticity vs. Current and Temperature 0.020 XM-L EZW 6V XLamp XM-L EZW LED, 6-V 0.020 0.015 0.010 0.015 0.005 0.010 0.000 0.005 ΔCCx -0.005 0.000 ΔCCy -0.010 ΔCCx -0.005 -0.015 ΔCCy -0.010 -0.020 -0.015 0 500 -0.020 1000 1500 2000 Current (mA) 0 500 1000 1500 2000 Current (mA) XM-L EZW 12V XLamp XM-L EZW LED, 12-V 0.020 XM-L EZW 12V 0.015 0.020 0.010 0.015 0.005 0.010 0.000 0.005 -0.005 0.000 -0.
PAGE 13
xlamp ® xm-l easywhite ® leds Typical Spatial Radiation Pattern Typical Spatial Distribution Relative Luminous Intensity (%) 100 80 60 40 20 -100 -80 -60 -40 0 -20 0 20 40 60 80 100 Angle (º) Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient.
PAGE 14
xlamp ® xm-l easywhite ® leds Performance Groups – Brightness (TJ = 85 °C) XLamp XM-L EasyWhite LEDs are tested for luminous flux and placed into one the following bins. Group Code Min. Luminous Flux @ 700 mA, 6 V (@ 350 mA , 12 V) Max. Luminous Flux @ 700 mA, 6 V (@ 350 mA, 12 V) S6 180 200 T2 200 220 T3 220 240 T4 240 260 T5 260 280 T6 280 300 U2 300 320 U3 320 340 U4 340 360 U5 360 380 U6 380 400 V2 400 420 ® ® ® Copyright © 2010 2011-2014 Cree,AllInc.
PAGE 15
xlamp ® xm-l easywhite ® leds Performance Groups – Chromaticity (TJ = 85 °C) XLamp XM-L EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step EasyWhite Color Temperatures – 2-Step Code Code 50F 40F 35F 30F 27F CCT 5000 K 4000 K 3500 K 3000 K 2700 K x y 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3744 CCT x y 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3521 0.
PAGE 16
xlamp ® xm-l easywhite ® leds Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space (TJ = 85 °C) 0.45 ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step 0.44 2700K 3000K 0.43 3500K 0.42 4000K 0.41 4500K 0.40 5000K CCy 0.39 5700K 0.38 0.37 0.36 0.35 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj=85 °C) 0.45 0.44 2900K 2600K 3000K 0.
PAGE 17
xlamp ® xm-l easywhite ® leds Bin and Order Code Format Bin codes and order codes are configured as follows: Order Code Bin Code Series XML = XM-L Series XML = XM-L Internal code Internal code Internal code Flux bin Kit code Internal code SSSCCC-BB-HHHH-NNNNNNNNN Vf class: B = 6-V class D = 12-V class SSSCCC-B-WWW-FFF-GAAAAAA Vf class: B = 6-V class D = 12-V class Reel size 0 = 1000 (standard) Chromaticity bin Color EZW = EasyWhite Color EZW = EasyWhite ® ® ® Copyright © 2010 2011-201
PAGE 18
xlamp ® xm-l easywhite ® leds Reflow Soldering Characteristics In testing, Cree has found XLamp XM-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder 3 °C/second max.
PAGE 19
xlamp ® xm-l easywhite ® leds Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products.
PAGE 20
xlamp ® xm-l easywhite ® leds Notes - Continued Vision Advisory WARNING. Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. ® ® ® Copyright © 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved.
PAGE 21
4.8 C xlamp ® xm-l easywhite ® leds 2.26 Mechanical Dimensions 4.7 3.9 All measurements are ±.13 mm unless otherwise indicated. 6 6 5 B 4 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND 6 CONFIDENTIAL INFORMATION OF CREE, INC. 5 THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY NOTICE 4.7 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC.
PAGE 22
6 5 4 3 REVISIONS 4.00[.157] DESCRIPTION REV BY DATE POCKET SIZE D 2.00[.079] 1 2 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. Do1.50 P2 +.10 +.0039 .0591 -.00 -.0000 [ ] 1.75[.069] E1 Po Tape and Reel Ao - 5.40mm [.213"] Bo - 5.40mm [.213"] Ko - 3.35mm [.132"] 3.
PAGE 23
xlamp ® xm-l easywhite ® leds Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Qty, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Qty, Reel ID, PO # Label with Cree Bin Code, Qty, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Qty, Reel ID, PO # Patent Label Label with Cree Bin Code, Qty, Reel ID Patent Label ® ® ® Copyri