Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Warm white 6 W 168 lm 110 ° 46 V 125 mA

Product family data sheet

WWW.CREE.COM/XLAMP

Cree

, the Cree logo and XLamp

are registered trademarks of Cree, Inc.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.407.5300

CLD-DS44 REV 6

Cree

XLamp

XM-L HVW LEDs

PRODUCT DESCRIPTION

The Cree XLamp

XM-L High-Voltage

White (HVW) LED provides the

lighting-class performance and

reliability of Cree XLamp LEDs in

the standard XM package. The

XM-L HVW LED is an order of

magnitude smaller than other high-

voltage LED arrays, allowing easy

implementation of space-constrained

lighting applications with smaller,

more efcient high-voltage drivers.

Among these applications are lamps

such as A19, B10, GU10, MR16,

PAR30 and E17.

FEATURES

• Binned at 85 °C

• Typical forward voltage of 46 V @

44 mA, with Vf binning available

• Cree-standard XM mechanical

footprint, with electrically neutral

thermal path

• Low thermal resistance: 3.5 °C/W

• Wide viewing angle: 110°

• Maximum drive current: 125 mA

• Maximum junction temperature:

150 °C

• Unlimited oor life at ≤

30 ºC/85% RH

• Reow solderable

• Available in standard CRI and

80-minimum CRI congurations

• UL-recognized component

(E349212)

TABLE OF CONTENTS

Characteristics .......................... 2

Flux Characteristics .................... 2

Relative Spectral Power

Distribution............................... 3

Relative Flux vs. Junction

Temperature ............................. 3

Electrical Characteristics ............. 4

Relative Flux vs. Current ............ 4

Typical Spatial Distribution .......... 5

Thermal Design ......................... 5

Reow Soldering Characteristics .. 6

Notes ....................................... 7

Mechanical Dimensions............... 8

Tape and Reel ........................... 9

Packaging ............................... 10

Summary of content (10 pages)

PAGE 1
® CLD-DS44 rev 6 Product family data sheet ® Cree XLamp XM-L HVW LEDs Product Description FEATURES Table of contents The Cree XLamp® XM-L High‑Voltage • Binned at 85 °C Characteristics........................... 2 White the • Typical forward voltage of 46 V @ Flux Characteristics..................... 2 and 44 mA, with Vf binning available (HVW) lighting-class LED provides performance reliability of Cree XLamp LEDs in the standard XM package.
PAGE 2
XLamp ® XM-l HVW LED Characteristics Characteristics Unit Thermal Resistance, junction to solder point °C/W 3.5 degrees 110 mV/°C -35 Viewing Angle (FWHM) Temperature coefficient of voltage Minimum Typical ESD Classification (HBM per Mil-Std-883D) Maximum Class 2 DC Forward Current mA 125 Reverse Current mA 0.
PAGE 3
XLamp ® XM-l HVW LED Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power 100% 80% 60% 5000K - 8300K CCT 2600K - 3700K CCT 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF = 44 mA) Relative Luminous Flux 120% 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2011-2014 Cree, Inc. All rights reserved.
PAGE 4
XLamp ® XM-l HVW LED Electrical Characteristics (TJ = 85 °C) 140 Forward Current (mA) 120 100 80 60 40 20 0 40 42 44 46 48 50 52 Forward Voltage (V) Relative Flux vs. Current (TJ = 85 °C) Relative Luminous Flux 250% 200% 150% Thermal Design 100% 50% 0% 0 25 50 75 100 125 Forward Current (mA) Copyright © 2011-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
PAGE 5
XLamp ® XM-l HVW LED Typical Spatial Distribution Relative Luminous Intensity 100% 80% 60% 40% 20% -90 -70 -50 0% -10 -30 10 30 50 70 90 Angle (º) Thermal Design 140 Maximum Current (mA) 120 100 80 60 40 Rj-a Rj-a Rj-a Rj-a 20 0 0 = = = = 10°C/W 15°C/W 20°C/W 25°C/W 20 40 60 80 100 120 140 Ambient Temperature (ºC) Copyright © 2011-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
PAGE 6
XLamp ® XM-l HVW LED Reflow Soldering Characteristics In testing, Cree has found XLamp XM-L HVW LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow-soldering equipment.
PAGE 7
XLamp ® XM-l HVW LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products.
PAGE 8
XLamp ® XM-l HVW LED Mechanical Dimensions 6 5 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT 6 MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT NOTICE 6 5 OF CREE INC. CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINEDNOTICE WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CREE CONFIDENTIAL.
PAGE 9
6 5 4 3 2.00[.079] 4.00[.157] 1 2 REVISIONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. DESCRIPTION REV BY DATE APP'D POCKET SIZE Do1.50 P2 +.10 +.0039 .0591 -.00 -.0000 [ ] 1.75[.069] E1 Po Ao - 5.40mm [.213"] Bo - 5.40mm [.213"] Ko - 3.35mm [.132"] Tape and Reel 3.0° 5.
PAGE 10
XLamp ® XM-l HVW LED Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Qty, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Qty, Reel ID, PO # Label with Cree Bin Code, Qty, Reel ID Label with Custo Code, Qty, Reel Boxed Reel Label with Cree Order Code, Qty, Reel ID, PO # Patent Label Label with Cree Bin Code, Qty, Reel ID Patent Label Copyright © 2011-2014 Cr