Datasheet

ManualsBrandsCREE ManualsHighPower-LEDsHighPower LED Neutral white 3 W 118 lm 110 ° 2.9 V 1000 mA

PRODUCT FAMILY DATA SHEET

notice. Cree

, the Cree logo and XLamp

are registered trademarks of Cree, Inc. UL

and the UR logo are registered

trademarks of UL LLC.

CLD-DS56 REV 7A

Cree

XLamp

XP-E2 LEDs

PRODUCT DESCRIPTION

The XLamp

XP-E2 LED builds on the

unprecedented performance of the

original XP-E by increasing lumen

output up to 20% while providing

a single die LED point source for

precise optical control. The XP-E2

LED shares the same footprint

as the original XP-E, providing a

seamless upgrade path to more

lumens and/or greater efciency

while shortening the design cycle

for existing XP customers.

XLamp XP-E2 LEDs are the ideal

choice for lighting applications

where high light output and

maximum efcacy are required,

such as LED retrot lamps, outdoor,

portable, indoor directional,

emergency vehicle or architectural.

FEATURES

• Available in white, outdoor

white, 80-CRI, 85-CRI, 90-CRI

white, royal blue, blue, green,

PC amber, amber, red-orange &

red

• ANSI-compatible chromaticity

bins

• White binned at 85 °C

• Maximum drive current: 1 A

• Low thermal resistance: as low

as 5 °C/W

• Wide viewing angle: 110°-135°

• Unlimited oor life at

≤ 30 °C/85% RH

• Reow solderable - JEDEC

J-STD-020C compatible

• Electrically neutral thermal path

• RoHS- and REACh-compliant

• UL

recognized component

(E349212)

WWW.CREE.COM/XLAMP

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

TABLE OF CONTENTS

Characteristics .......................... 2

Flux Characteristics - White ........ 3

Flux Characteristics - Color ......... 4

Relative Spectral Power

Distribution............................... 7

Relative Flux vs. Junction

Temperature ............................. 8

Electrical Characteristics - White .. 9

Electrical Characteristics - Color .. 9

Relative Flux vs. Current - White 10

Relative Flux vs. Current - Color .10

Relative Chromaticity vs. Current

and Temperature ......................11

Typical Spatial Distribution .........12

Thermal Design ........................13

Reow Soldering Characteristics .14

Notes ......................................15

Mechanical Dimensions..............17

Tape and Reel ..........................18

Packaging ................................19

Summary of content (19 pages)

PAGE 1
® ® CLD-DS56 Rev 7A Product family data sheet Cree XLamp XP-E2 LEDs Product Description FEATURES Table of Contents The XLamp® XP-E2 LED builds on the • Available in white, outdoor Characteristics........................... 2 unprecedented performance of the white, 80-CRI, 85-CRI, 90-CRI Flux Characteristics - White......... 3 original XP-E by increasing lumen white, royal blue, blue, green, Flux Characteristics - Color..........
PAGE 2
xlamp ® xp-e2 leds Characteristics Characteristics Unit Minimum Typical Thermal resistance, junction to solder point - white, royal blue, blue °C/W 9 Thermal resistance, junction to solder point - green °C/W 15 Thermal resistance, junction to solder point - PC amber °C/W 9 Thermal resistance, junction to solder point - amber °C/W 7 Thermal resistance, junction to solder point - red-orange, red °C/W 5 Viewing angle (FWHM) - white degrees 110 Viewing angle (FWHM) - royal blue, blue, gre
PAGE 3
xlamp ® xp-e2 leds Flux Characteristics (TJ = 85 °C) - White The following table provides several base order codes for XLamp XP-E2 LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XP Family LEDs Binning and Labeling document. CCT Range Color Min.
PAGE 4
xlamp ® xp-e2 leds Flux Characteristics (TJ = 25 °C) - Color The following tables provide several base order codes for XLamp XP-E2 color LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XP Family LEDs Binning and Labeling document.
PAGE 5
xlamp ® xp-e2 leds Flux Characteristics (TJ = 25 °C) - Color (Continued) Dominant Wavelength Range Min. Color Group Green Max. DWL (nm) G2 520 Color G4 535 Amber A2 585 87.4 XPEBGR-L1-0000-00A01 Q3 93.9 XPEBGR-L1-0000-00B01 Q4 100 XPEBGR-L1-0000-00C01 Q5 107 XPEBGR-L1-0000-00D01 R2 114 XPEBGR-L1-0000-00E01 R3 122 XPEBGR-L1-0000-00F01 R4 130 XPEBGR-L1-0000-00G01 87.4 XPEBPA-L1-0000-00A01 Q3 93.
PAGE 6
xlamp ® xp-e2 leds Flux Characteristics (TJ = 25 °C) - Color (Continued) Dominant Wavelength Range Min. Color Group RedOrange Max. DWL (nm) O3 610 Group DWL (nm) O4 620 Dominant Wavelength Range Min. Color Group Red R2 Max. DWL (nm) 620 Group R3 DWL (nm) 630 Base Order Codes Min. Luminous Flux (lm) @ 350 mA Order Code Group Flux (lm) P2 67.2 XPEBRO-L1-0000-00701 P3 73.9 XPEBRO-L1-0000-00801 P4 80.6 XPEBRO-L1-0000-00901 Q2 87.4 XPEBRO-L1-0000-00A01 Q3 93.
PAGE 7
xlamp ® xp-e2 leds Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power (%) 100 90 80 70 60 Cool White 50 Warm White 40 30 20 10 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Spectral Power Relative Radiant Power (%) 100 80 Royal Blue Blue 60 Green PC Amber Amber 40 Red-Orange Red 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright © 2012-2015 Cree, Inc. All rights reserved.
PAGE 8
xlamp ® xp-e2 leds Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF = 350 mA) Relative Luminous Flux (%) 120 100 80 60 White 40 20 Relative 0Flux Output vs. Junction Temperature 25 50 75 100 125 150 Junction Temperature (ºC) 100 Relative Radiant Flux (%) 90 80 70 60 50 Royal Blue 40 30 20 10 0 25 50 75 100 125 Relative Flux Output vs.
PAGE 9
xlamp ® xp-e2 leds Electrical Characteristics Electrical Characteristics (Tj = 25ºC) (TJ = 85 °C) - White 1000 900 Forward Current (mA) 800 700 600 500 White 400 300 200 100 0 2.7 2.8 2.9 3.0 3.1 3.2 Forward Voltage (V) Electrical Characteristics (Tj = 85ºC) Electrical Characteristics (TJ = 25 °C) - Color 1000 Forward Current (mA) 900 800 700 Royal Blue, Blue 600 Green 500 PC Amber 400 Amber, Red-Orange, Red 300 200 100 0 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.
PAGE 10
xlamp ® xp-e2 leds Relative Intensity vs. Current (Tj = 85ºC) Relative Flux vs. Current (TJ = 85 °C) - White Relative Luminous Flux (%) 250 200 150 White 100 50 0 0 100 200 300 400 500 600 700 800 900 1000 Relative Intensity vs. Current (Tj = 25ºC) Forward Current (mA) Relative Flux vs. Current (TJ = 25 °C) - Color Relative Radiant Flux (%) 250 200 150 Royal Blue 100 50 Relative Intensity vs.
PAGE 11
xlamp ® xp-e2 leds Relative Chromaticity Vs. Current, WW Relative Chromaticity vs. Current and Temperature - Warm White* 0.020 T = 85 °C J 0.015 0.010 0.005 ΔCCx 0.000 ΔCCy -0.005 -0.010 -0.015 -0.020 0 100 200 300 400 500 Relative Chromaticity Vs. Temperature WW 600 700 800 900 1000 Current (mA) 0.020 I = 350 mA F 0.015 0.010 0.005 ΔCCx 0.000 ΔCCy -0.005 -0.010 -0.015 -0.020 0 20 40 60 80 100 120 140 160 Tsp (°C) * Warm White XLamp XP-E2 LEDs have a typical CRI of 80.
PAGE 12
Typical Spatial Radiation Pattern xlamp ® xp-e2 leds Typical Spatial Distribution Relative Luminous Intensity (%) 100 80 60 White 40 20 -90 -70 -50 -30 0 -10 10 30 50 70 90 Angle (°) Typical Spatial Radiation Pattern Relative Luminous Intensity (%) 100 80 60 Royal Blue, Blue, Green PC Amber Amber, Red-Orange, Red 40 20 -90 -70 -50 -30 -10 0 10 30 50 70 90 Angle (º) Copyright © 2012-2015 Cree, Inc. All rights reserved.
PAGE 13
xlamp ® xp-e2 leds Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics.
PAGE 14
xlamp ® xp-e2 leds Reflow Soldering Characteristics In testing, Cree has found XLamp XP-E2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
PAGE 15
xlamp ® xp-e2 leds Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products.
PAGE 16
xlamp ® xp-e2 leds Notes - Continued Vision Advisory WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
PAGE 17
C .65 xlamp ® xp-e2 leds 1.30 Mechanical Dimensions 6 All measurements are ±.13 mm unless otherwise indicated. 5 4 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. Anode B .60 6 3 6 1.20 TICE NOTICE D D THE INFORMATION AND THE INFORMATION .
PAGE 18
±0 .0 5 Y 5 E1 1.7 Do DETAIL B SCALE 2 : 1 REF 4.375 F(III) Bo xlamp ® xp-e2 leds REF 4.375 Bo R 0.2 TYPICAL Ko X X Tape and Reel D1 1.5 MIN. SECTION Y-Y Y RE R 0.2 TYPICAL All Cree carrier tapes Component Handling Systems Standard. Y Ko conform to EIA-481D, Automated P1 Ao D1 1.5 MIN. SECTION Y-Y All dimensions in mm. REF 0.59 FR 2.2 4 1.5 5 Do REF Po 4.0 ±0.1 (II) P2 2.0 ±0.05 (I) ±0 .0 4.375 CATHODE SIDE Y 5 Bo SECTION X-X 1.5±.1 4.0±.1 1.75±.10 .0 X 3.70 2.40 5.
PAGE 19
xlamp ® xp-e2 leds Packaging Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree O