® ® Cree XLamp XP-E High-Efficiency White LEDs PRODUCT DESCRIPTION FEATURES XLamp XP-E High-Efficiency White • LEDs upgrade the XLamp XP-E to leading performance levels for dif- TABLE OF CONTENTS Light output and efficacy similar to XLamp XP-G • fuse lighting applications. XP-E HEW Maximum drive current: 1000 mA is designed to enable faster adop- • Low thermal resistance: 6°C/W tion of LED light in cost-sensitive, • Maximum consumer lighting products.
XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS FLUX CHARACTERISTICS (TJ = 25°C) - WHITE The following table provides several base order codes for XLamp XP-E HEW LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XP Family Binning and Labeling document. Color CCT Range Min. Max.
XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS CHARACTERISTICS Characteristics Unit Thermal Resistance, junction to solder point - white °C/W 6 degrees 120 Viewing Angle (FWHM) - white Temperature coefficient of voltage - white Minimum Typical mV/°C Maximum -3 ESD Classification (HBM per Mil-Std-883D) Class 2 DC Forward Current - white mA 1000 Reverse Voltage V 5 Forward Voltage (@ 350 mA) - white V 3.0 Forward voltage (@ 700 mA) - white V 3.15 Forward Voltage (@ 1000 mA) - white V 3.
XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS RELATIVE SPECTRAL POWER DISTRIBUTION (CONTINUED) Relative Radiant Power (%) 100 80 60 Outdoor White 85 & 90 CRI White 40 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 350 MA) 100% Relative Luminous Flux 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2010 Cree, Inc. All rights reserved.
XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS ELECTRICAL CHARACTERISTICS (TJ = 25°C) Electrical Characteristics (Tj = 25ºC) 1000 900 Forward Current (mA) 800 700 600 500 400 300 200 100 0 2.00 2.25 2.50 2.75 3.00 3.25 3.50 Forward Voltage (V) THERMAL DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient.
XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS RELATIVE FLUX VS. CURRENT (TJ = 25°C) Relative Luminous Flux (%) 250% 200% 150% 100% 50% Typical Spatial Radiation Pattern 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) TYPICAL SPATIAL DISTRIBUTION Relative Luminous Intensity (%) 120 100 80 60 40 20 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Angle (º) Copyright © 2010 Cree, Inc. All rights reserved.
XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp XP-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS Notes Lumen Maintenance Projections Cree currently recommends a maximum drive current of 700 mA for XLamp XP-E High Efficiency White in designs seeking the ENERGY STAR* 35,000 hour lifetime rating (≥ 94.1% luminous flux @ 6000 hours) or 1000 mA driver current in designs seeking the ENERGY STAR* 25,000 hour lifetime rating (≥ 91.8% luminous flux @ 6000 hours).
XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS 3.450 6 5 NOTICE 6 CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION 4 5 2.08 3 4 2 3 REV CONTAINED WITHIN ARE THE PROPRIETARY AND NOTICE CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION MAY NOT BE COPIED, CONTAINED WITHIN ARE THE REPRODUCED PROPRIETARY OR ANDDISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT OF BE CREE INC.
6 5 4 3 2 REVISONS NOTICE L. THIS PLOT AND THE INFORMATION ARE THE PROPRIETARY AND RMATION OF CREE, INC. THIS PLOT D, REPRODUCED OR DISCLOSED TO ANY RSON WITHOUTTHE WRITTEN CONSENT REV DESCRIPTION XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS TAPE AND REEL AllUser dimensions in mm. Feed Direction 1.5± .1 8±.1 END 1.5± .1 CATHODE SIDE User Feed Direction 4±.1 8±.1 END CATHODE SIDE 1.75 ±.10 START 2.5±.1 12.0 +.3 -.
XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS Dessicant Desiccant (inside bag) (inside bag) Humidity Indicator Humidity Indicator Card (inside bag)bag) (inside PACKAGING Vacuum-Sealed All dimensions in mm.
CLD-AP22 REV 13 BINNING & LABELING Cree XLamp XP Family LEDs ® ® WWW. CREE.COM/XLAMP TABLE OF CONTENTS Introduction.................................................................................................................................................................2 Bin and Order-Code Format...........................................................................................................................................2 Performance Groups – Brightness................................
CLD-AP22 REV 13 INTRODUCTION This document describes the product nomenclature required to select and order Cree’s XLamp XP Family LEDs. XLamp XP Family LEDs are tested and sorted into bins which are then combined into orderable kits identified by an order code. All XLamp LEDs are tested and sorted by color and brightness into a unique bin. Each bin contains LEDs from only one color and brightness group and is uniquely identified by a bin code.
CLD-AP22 REV 13 PERFORMANCE GROUPS – BRIGHTNESS XLamp XP Family LEDs (except Royal Blue) are tested for luminous flux and placed into one of the following luminousflux groups: Group Code Min. Luminous Flux @ 350 mA (lm) Max. Luminous Flux @ 350 mA (lm) J 23.5 30.6 K2 30.6 35.2 K3 35.2 39.8 M2 39.8 45.7 M3 45.7 51.7 N2 51.7 56.8 N3 56.8 62.0 N4 62.0 67.2 P2 67.2 73.9 P3 73.9 80.6 P4 80.6 87.4 Q2 87.4 93.9 Q3 93.
CLD-AP22 REV 13 PERFORMANCE GROUPS – CHROMATICITY White XLamp LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the following pages. Region WK WA WM WB WE WN WC x y .283 .284 .295 .297 .298 .288 .287 Region x y .314 .355 .316 .332 .306 .322 .276 .301 .342 .292 .306 .317 .319 .295 .297 .329 .330 .283 .284 .329 .318 .279 .291 .318 .308 .295 .297 .329 .345 .308 .311 .329 .330 .310 .300 .317 .319 .
CLD-AP22 REV 13 PERFORMANCE GROUPS – CHROMATICITY (CONTINUED) Region 0A 0R 1A 1R 2A 2R 3A 3R 4A 4R x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.3042 0.2980 0.2950 0.3009 0.3042 0.3037 0.3048 0.3130 0.3290 0.3144 0.3186 0.3068 0.3068 0.3144 0.3186 0.3161 0.3059 0.3093 0.2993 0.3215 0.3290 0.3290 0.3300 0.3222 0.3222 0.3290 0.3300 0.3290 0.3180 0.3231 Region x y 0.2920 0.3060 x y 0.2984 0.3133 0.2895 0.3135 0.2962 0.3220 0.2962 0.3220 0.
CLD-AP22 REV 13 PERFORMANCE GROUPS – CHROMATICITY (CONTINUED) Region 5A1 5B1 5C1 5D1 5R 6A1 6B1 6C1 6D1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 Region x y 0.3686 0.3649 x y 0.3744 0.3685 0.3702 0.3722 0.3763 0.3760 0.3763 0.3760 0.3825 0.3798 0.3612 0.3744 0.3685 0.3804 0.3721 0.3702 0.3722 0.3719 0.3719 0.3797 0.3736 0.3797 0.3782 0.3874 0.3802 0.3782 0.3837 0.3802 0.3916 0.3763 0.3760 0.3782 0.3837 0.3869 0.3958 0.3847 0.3877 0.
CLD-AP22 REV 12 13 PERFORMANCE GROUPS – CHROMATICITY (CONTINUED) Region 7A1 7B1 7C1 7D1 8A1 8B1 8C1 8D1 x y 0.4147 0.4183 0.4242 0.3919 0.4203 0.4221 0.4259 0.4073 0.4322 0.4096 0.4281 Region x y 0.3814 0.4183 0.3898 0.4221 0.4281 0.4006 0.3833 0.4242 0.3984 0.4259 0.4299 0.4165 0.4364 0.4188 0.4006 0.4322 0.4096 0.4342 0.4028 0.4385 0.4385 0.4119 0.4430 0.4449 0.4141 0.4496 0.4236 0.4403 0.4049 0.4449 0.4141 0.4259 0.3853 0.4300 0.3939 0.4300 0.
CLD-AP22 REV 13 PERFORMANCE GROUPS – DOMINANT WAVELENGTH Color XLamp LEDs are tested for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Color DWL Group Min. DWL (nm) @ 350 mA Max.
CLD-AP22 REV 13 CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE Cool White ANSI Cool White 0.40 5000K 0.39 0.38 5700K 3S 0.37 6500K 2T 0.36 0.35 2C 1T 8000K CCy 3B 2S 0T 0.33 0S 0.32 0C 0.31 3R 2A 1D 2U ANSI C78.
CLD-AP22 REV 13 CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE (CONTINUED) Outdoor White 0.43 0.42 4000K 0.41 4500K 5T 0.40 5S 5000K 4T 0.39 5B3 CCy 5B4 3T 0.34 5A1 5U 5R 3D 4U 3A 5D1 5A4 4A 0.35 5D4 5A2 4D 3B 5D3 5D2 5A3 4B 3C 0.36 5B1 4C 3S 0.37 5C4 5C1 5B2 4S 0.38 5C3 5C2 ANSI C78.377A 4R 3U 3R 0.33 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 CCx Copyright © 2008-2010 Cree, Inc. All rights reserved.
CLD-AP22 REV 13 CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE (CONTINUED) ANSI Neutral White and ANSI warm white 0.46 0.45 2700K 3000K 0.44 0.43 3500K 0.42 4000K 4500K 6C3 6C2 CCy 6B2 5C3 5000K 0.39 5C4 5B4 0.38 5B1 4C 0.37 4B 4D 3B 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8B1 7C4 8A2 8A3 8A4 8D1 8B2 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 6D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 0.
CLD-AP22 REV 13 The following tables of order codes list flux minimums and chromaticity regions for the various categories of XLamp XP LEDs. For other flux and chromaticity combinations, contact Cree or an authorized distributor. STANDARD ORDER CODES AND BINS (XP-C COOL WHITE) XLamp XP-C LED Standard Order Codes - White Min. Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code Flux (lm) Cool White (5000 K – 10,000 K) P4 80.6 Q2 87.4 Q3 93.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-C NEUTRAL WHITE) XLamp XP-C LED Standard Order Codes - White Min Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 XPCWHT-L1-0000-007F5 4300 K 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 XPCWHT-L1-0000-007E5 4000 K 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 XPCWHT-L1-0000-007F6 3700 K 3A, 3B, 3C, 3D XPCWHT-
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-C WARM WHITE) XLamp XP-C LED Standard Order Codes - White Min Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPCWHT-L1-0000-005F8 2900 K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPCWHT-L1-0000-005E8 2700 K 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XPCWHT-L1-0000-006F7 32
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-C COLOR) XLamp XP-C LED Standard Order Codes - Royal Blue Color Royal Blue Min. Radiant Flux (mW) @ 350 mA* Group Flux (mW) Flux (mW) 12 250 104 13 14 300 350 Dominant Wavelength (nm) Calculated Min. Radiant Flux (mW) @ 125 mA* 124 145 Min. Max.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-C COLOR CONTINUED) XLamp XP-C LED Standard Order Codes - Color Color Red-Orange Red Min. Luminous Flux (lm) @ 350 mA* Calculated Min. Luminous Flux (lm) @ 125 mA* Dominant Wavelength (nm) Min. Max. Order Code M3 45.7 17.5 O3 610 O4 620 XPCRDO-L1-0000-00301 N2 51.7 19.8 O3 610 O4 620 XPCRDO-L1-0000-00401 N3 56.8 21.7 O3 610 O4 620 XPCRDO-L1-0000-00501 N4 62.0 23.7 O3 610 O4 620 XPCRDO-L1-0000-00601 K3 35.2 13.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E COOL WHITE) XLamp XP-E LED Standard Order Codes - White Min.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E ANSI COOL WHITE) XLamp XP-E LED Standard Order Codes - White Min.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E OUTDOOR WHITE) XLamp XP-E LED Standard Order Codes - White Min.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E NEUTRAL WHITE) XLamp XP-E LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Flux (lm) P4 80.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E 80-CRI MINIMUM, WHITE) XLamp XP-E LED Standard Order Codes - 80-CRI White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-H1-0000-008F8 2900 K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-H1-0000-008E8 2700 K 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 XP
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E WARM WHITE) XLamp XP-E LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-L1-0000-007E8 2700K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-L1-0000-008E7 3000K 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-L1-0000-008F8
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E 85-CRI MINIMUM, WHITE) XLamp XP-E LED Standard Order Codes - 85-CRI White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-P1-0000-006F8 2900 K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-P1-0000-006E8 2700 K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XP
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E COLOR) XLamp XP-E LED Standard Order Codes - Royal Blue Color Royal Blue Dominant Wavelength (nm) Min. Radiant Flux (mW) @ 350 mA* Group Flux (mW) 14 350 15 425 16 500 Min. Max.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E COLOR CONTINUED) XLamp XP-E LED Standard Order Codes - Color Dominant Wavelength (nm) Min. Luminous Flux (lm) @ 350 mA* Color Min. Max. Order Code M3 45.7 A2 585 A3 595 XPEAMB-L1-0000-00301 N2 51.7 A2 585 A3 595 XPEAMB-L1-0000-00401 N3 56.8 A2 585 A3 595 XPEAMB-L1-0000-00501 N4 62.0 A2 585 A3 595 XPEAMB-L1-0000-00601 N3 56.8 O3 610 O4 620 XPERDO-L1-0000-00501 N4 62.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E HEW OUTDOOR WHITE) XLamp XP-E HEW LED Standard Order Codes - White Min.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E HEW OUTDOOR WHITE, CONTINUED) XLamp XP-E HEW LED Standard Order Codes - White Min.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E HEW NEUTRAL WHITE) XLamp XP-E HEW LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 3A, 3B, 3C, 3D XPEHEW-L1-0000-00DE3 5000 K 3C, 3D, 4A, 4B XPEHEW-L1-0000-00DF4 4750 K 4A, 4B, 4C, 4D XPEHEW-L1-0000-00DE4 4500 K 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 XPEHEW-L1-0000-00DF5 4300 K 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 XPEHEW-L1-000
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E HEW 80-CRI MINIMUM, WHITE) XLamp XP-E HEW LED Standard Order Codes - 80-CRI White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEHEW-H1-0000-00AF8 2900 K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEHEW-H1-0000-00AE8 2700 K 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3,
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E HEW WARM WHITE) XLamp XP-E HEW LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEHEW-L1-0000-00AF8 2900 K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEHEW-L1-0000-00AE8 2700 K 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XPEHEW-L1-00
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-E HEW 85-CRI MINIMUM, WHITE) XLamp XP-E HEW LED Standard Order Codes - 85-CRI White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEHEW-P1-0000-008F8 2900 K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEHEW-P1-0000-008E8 2700 K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3,
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-G ANSI COOL WHITE) XLamp XP-G LED Standard Order Codes - White Min.
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-G NEUTRAL WHITE) XLamp XP-G LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 3A, 3B, 3C, 3D XPGWHT-L1-0000-00DE3 5000 K 3C, 3D, 4A, 4B XPGWHT-L1-0000-00DF4 4750 K 4A, 4B, 4C, 4D XPGWHT-L1-0000-00DE4 4500 K 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 XPGWHT-L1-0000-00DF5 4300 K 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 XPGWHT-L1-0000-00DE5
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-G 80-CRI MINIMUM, WHITE) XLamp XP-G LED Standard Order Codes - 80-CRI White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPGWHT-H1-0000-00AF8 2900 K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPGWHT-H1-0000-00AE8 2700 K 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XP
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-G WARM WHITE) XLamp XP-G LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPGWHT-L1-0000-00AF8 2900 K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPGWHT-L1-0000-00AE8 2700 K 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XPGWHT-L1-0000-00BF7
CLD-AP22 REV 13 STANDARD ORDER CODES AND BINS (XP-G 90-CRI MINIMUM, WHITE) XLamp XP-G LED Standard Order Codes - 90-CRI White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Order Code CCT 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPGWHT-U1-0000-008F8 2900 K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPGWHT-U1-0000-008E8 2700 K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XP
