User's Manual

4
Green LED “DC ON” shines, if the power supply voltage is applied to the unit.
The fan rotates, when the rated RF signal is present at the input.
Red LED “LOW OUT” goes on, if the output power fails to more than 1 dB below the rated level.
It may indicate a problem inside the unit. Be sure that the power supply voltage and input power are in the
allowed limits.
Red LED “HIGH VSWR” goes on, when the load VSWR is greater than 2 – 2.5.
Red LED “HIGH TEMP” goes on, when the heatsink temperature exceeds +85ºC.
Part 90 Amplifier This is a 90.219 class B device
Warning: This is not a Consumer device. It is designed for installation by FCC Licensees and qualified installers. You must have an
FCC license or express consent of an FCC licensee to operate this device. You must register Part 90 Class B Signal boosters online at
www.fcc.gov/signal-boosters/registration. Unauthorized use may result in a significant forfeiture penalties, including in excess of
$100,000 for each continuing violation
RF EXPOSURE:
The antenna gain used with this transmitter should be 0 dBi or less and all persons should maintain a minimum safety
separation distance of 204.4 cm for the United States and 254.4 cm for Canada.