Installation and Operating Manual

User Manual
040003A010 Rev A Page 12 of 25
PIN NO
NAME
SIGNAL
TYPE
DESCRIPTION
SIGNAL
STATES
CONDITION
APPROPRIATE
LOAD
15.
LOW PWR
Digital
Output
Alarm - Low
Output Power
<0.8V
Alarm the analog control loop is open
and unable to adjust the output power
level. Alarm is turned off only when the
analog control loop is closed. Check if
drive level is within normal limits. If RF
input is within range, and all other
conditions are normal, this may indicate a
potential PA failure.
> 100 kOhm,
< 100pF
>3.3V
Normal operation