Product Brochure

Trusted by the Trades.
2
I
www.crescenttool.com www.crescenttool.com
I
3
COARSENESS
■ Area to be filed will determine specific cross-section (round, square, flat, etc.) to be used.
SHAPE
LENGTH
■ Length is measured exclusive of tang, from point to heel, unless specified otherwise
■ Desired stroke length, type of material and size will determine length required
Tang
Flat Three Square Mill Warding Square
Hand RoundKnife
Heel
Length
Belly Point
Half Round
File Terminology
TABLE OF CONTENTS
File Terminology ....................................................................... 3
Kinds of Teeth ........................................................................... 5
Selection Charts .................................................................. 5-6
American Pattern Files
File Sets ................................................................................. 7-11
10” General Purpose Laminate File with Handle .......... 11
2-in-1 Bastard and Smooth Cut Files ............................... 11
Flat Files ................................................................................... 13
Flat Files “A” Flat Aluminum Files .................................... 13
Half Round Files ..................................................................... 14
Hand Files ................................................................................ 15
Handy Files .............................................................................. 15
Magicut® Flat Files ................................................................ 16
Knife Files ................................................................................. 16
Long Angle Lathe Files .........................................................17
Square Files ..............................................................................17
Mill Files .................................................................................... 18
1 and 2 Round Edge Mill Files ............................................ 19
Axe Sharpening Files ........................................................... 19
Round Files .......................................................................19-20
Warding Files ......................................................................... 20
Round Chain Saw Files ........................................................ 21
Depth Gauge Chain Saw File .............................................. 21
Taper Files ............................................................................... 22
Tungsten Point Files ............................................................ 23
Three Square Files ............................................................... 23
Coarse Half Round Wood File........................................... 23
American Pattern Rasps
Pattern Maker’s Cabinent Rasps .................................... 24
Cabinent Rasps ..................................................................... 24
Wood Rasps ............................................................................ 24
■
Work to be accomplished, roughing or finishing, will determine type of teeth and coarseness for
each application
■
Most American pattern files are available with 3 grades of cut: bastard-cut, second-cut and
smooth-cut
■
Swiss pattern files are available in seven cuts: No. 00, 0,1, 2, 3, 4, and 6
■
The degree of coarseness is greater in longer files, but differences between bastard, second and
smooth are proportionate
American Pattern
Bastard cut
Second cut
Smooth cut
Swiss Pattern Files
64
0
1 2
300
4-in-1 Hand Rasps ................................................................ 25
3 Pc. 4-in-1 Combination Chisel and
Wood Rasp Set ...................................................................... 25
Farrier’s Handy Rasp .......................................................... 26
Magicut® Plater’s Special Horse Rasp .......................... 26
Horse Rasp ............................................................................. 26
Horse Rasp with Plain 1/2 File ..........................................27
Milled Tooth Bodifiles ...........................................................27
Swiss Pattern Files
6 Pc. Hobbie File Set ............................................................27
X.F. Swiss Pattern Needle File Assortment Sets ..28-29
Needle Files ...................................................................... 30-31
Silversmith’s Rifflers ............................................................ 31
Die Sinker’s Rifflers ............................................................. 32
Pillar Files ......................................................................... 32-33
Equaling Files ......................................................................... 33
Warding Files ......................................................................... 33
Barrette Files .......................................................................... 34
Hot Die Barette Files ............................................................ 34
Pippin File ................................................................................ 34
Half Round Files .................................................................... 35
Round Files ............................................................................. 35
Accessories
4 Pc. Thread Restoring File Set ....................................... 36
Thread Restoring Files ........................................................ 36
Milled Tooth Bodifiles ...........................................................37
File Cleaners ............................................................................37
Ergonomic File Handle ........................................................ 38
Plastic Screw-on Handles ................................................. 38
Universal Handles ............................................................... 38
Metal Ferruled Wooden Handles ..................................... 39