CKi Series Power Amplifiers CKi SERIES
Introduction Crest Audio, the first company to offer computer controlled amplification now raises the bar. With the introduction of the CKi series of amplifiers, Crest Audio has added many standard features that other manufactures either charge additional for or don’t offer at all.Whether your requirements are simple or extremely complex, CKi series amplification systems are perfect for permanent installations of any size.
CKiS Series Designed to drive low impedance loads Model Stereo 8Ω 2Ω Bridged 8Ω 4Ω 4Ω Class RMS Maximum CKi100s 60W 90W N/A 180W N/A AB 22V 31V CKi200s 120W 175W N/A 350W N/A AB 32V 45V CKi400s 255W 320W N/A 510W N/A AB 56V 64V CKi800s 440W 670W N/A 880W N/A AB 64V 90V CKi800-2s 420W 670W 870W 880W 1740W H 64V 90V CKi1200s 630W 940W 1130W 1880W 2260W H 78V 110V CKi1600s 815W 1130W 1440W 2260W 2880W H 90V 127V power ratings are Watts pe
CKiV Series Designed specifically for 70 Volt distributed applications Model 70.7 Volt 140 Volt* Class RMS Maximum CKi100v 50W 100W AB 92V 130V CKi200v 100W 200W AB 92V 130V CKi400v 200W 400W AB 92V 130V CKi800v 400W 800W AB 92V 130V CKi1600v 800W 1600W H 92V 130V CKi2400v 1200W 2400W H 92V 130V 70.7 Volt power rating is Watts per channel, both channels driven, 20Hz -20kHz, 0.
CKiX Series Engineered for 100 Volt transformer isolated systems Model Stereo 50 Volt* 70.7 Volt* 100 Volt Bridged 200 Volt Class RMS Maximum CKi150x 75W 75W 75W 150W AB 105V 150V CKi300x 150W 150W 150W 300W AB 105V 150V CKi500x 250W 250W 250W 500W AB 105V 150V CKi800x 400W 400W 400W 800W AB 105V 150V 50, 70.7, and 100 Volt power rating is Watts per channel, both channels driven, 40Hz -20kHz, 0.1% THD+N *50 and 70.
NxCobraNet Module Optional Module for NexSys Control and CobraNet Digital Audio The NxCobraNet® module supports all NexSys control and monitoring functions as well as delivering two channels of CobraNet digital audio to the amplifier on one ethernet cable. Supported computer controlled NexSys functions include gain, sequential power, and real time load monitoring.
NxDSP Optional DSP for NExSys Control and CobraNet Digital Audio The Crest Audio NxDSP plug in board for NxCobraNet and NxEthernet performs various functions depending on which module it is used with. NxEthernet module: provides speaker processing including limiting, equalization, speaker alignment, delay and gain.
Crest Audio reserves the right to make improvements in manufacturing or design which may affect specification. Crest Audio specification literature is available in electronic form to qualified users. Contact Crest Audio Inc. for more information. ©2004 Crest Audio Inc. Crest Audio Inc. 16-00 Pollitt Dr. Fair Lawn NJ 07410 USA TEL: 201.909.8700 FAX: 201.909.8744 www.crestaudio.