Owner`s manual

Front panel features

TAPEIN level

On the rear panel there are Left and Right TAPEINconnectors, both 1/4”

TRSand RCA. They can be used to bring in a stereo source such as a two-track

playback from tape, CD, MD, or a sampler. This knob controls the level to the Aux

1/2 and Left/Right buses.

TAPEIN assignment

TOA1-2This assigns the stereo TAPEINto Auxes 1 and 2, which are con-

figured as a stereo pair. This is useful for stereo program monitoring.

TOL-RThis assigns the stereo TAPEINfeed to the Left and Right mix

buses. This is useful for in-between-set background music and as an extra stereo

return.

AUXOUT1-2 level control

This is the master stereo output level control for the AUX 1/2 pair.

Aux 1-2 AFL

This button assigns the AUX 1/2 stereo pair to the solo system. Since it is

AFL, the signal is monitored after the AUXinsert and master level control. Auxes

1 & 2 show up in stereo in the System - 1 on the left and 2 on the right.

AUX OUT 3, 4, 5 & 6 level controls

These are the master output level controls for Auxes 3, 4, 5 &6.

Aux 3, 4, 5, & 6 AFL

These buttons assign Auxes 3, 4, 5 & 6 to the solo system. Since they are

AFL, the signals are monitored after the AUXinserts and master level controls.

Master section

p.31