Installation Instructions

33
15. Seal gap between inactive insert and head
jamb with self-stick Q-LON corner seal. Trim
pad to fit, peal release liner and stick pad in
place (FIGURES 13 & 14).
16. Clean up any excess caulk using a spray bottle
filled with denatured alcohol and a soft clean shop
towel.
17. Repeat Steps 5 through 16 to install second
inactive insert.
4-Wide – Inactive Insert Installation (cont.)
CUT PAD
TO WIDTH
SKIN TO EXTERIOR
(No Foam Exposed)
FIGURE 13
FIGURE 14
Improper use of hand and power tools could
result in personal injury and/or product damage.
Follow equipment manufacturers’ instructions for
safe operation. Always wear safety glasses.
4-Wide
All
Wd Bk Mld
Cld Nail Fin
Gen - All