INSTRUCTION MANUAL Bar Stool
BEFORE INSTALLATION Please list all parts as below first to check if any part is missing and make assembly easier. Do be careful that some parts are heavy and sharp. Please follow the assembly steps to install the product, if you find spare parts left, don't be worried, the left spare parts are prepared for bad ones if occurred. Once you hand tighten all of your bolts into place, we are going to use our wrench to fully tighten into place. Please do not exceed the bearing limitations of the product.
ASSEMBLY 1 PARTS REQUIRED A A E B 1PC 1PC F 1PC 1PC H D 2 K 3 C 8PCS K 2PCS 1PC C I G 1PC 2PC 2PC
ASSEMBLY PARTS REQUIRED 4 K K 2PCS Please make the seat and back piece to the position as the image showed, and then put into screw. 5 J 14PCS Please attach every single plastic cover to each screw. If you find stools uneven when assem bled, please loosen the 8 screws on the bars, then tighten these screws until stools are adjusted to be even.
WARM TIPS Warm Tips： If you have any problem with this product or our service, please don't hasty in writing negative review or feedback. Please welcome to contatct us at service@crestliveproducts.com right away, our service team will response within 24 hours , and we will try our best to help you. Thank you for giving us a chance to improve the product and our service. CARE & MAINTENANCE Do not put hot items directly on furniture surface. Do not clean furniture with harsh cleansers or polish.
