- Crestron Electronics 3.6" FlipTop Touchpanel Control Center Specification Sheet

The C2N-FT-TPS4 provides an ingenious control and connectivity solution in a
stylish flush mount tabletop package. Simply flip open the "FlipTop" lid to expose a
color touchpanel and keypad, perfectly angled for easy access and operation. The
built-in cable storage compartment keeps interface cables at the ready for plugging
in computers, AV sources, and a host of other devices.
FlipTop Housing—Handsomely finished in either black anodized or brushed
aluminum, the C2N-FT-TPS4 mounts flush in any tabletop surface for a clean,
discreet appearance.
Integrated Touchpanel—Integrated into the FlipTop lid, the bright 3.6” active
matrix color touchscreen provides a fully-customizable user interface for control of
AV, lighting, and other functions. With 16-bit Isys
®
graphics, the C2N-FT-TPS4
produces amazing 3D graphics, dynamic text, and full-motion animations complete
with WAV file audio feedback. Ten programmable pushbuttons are also included
featuring translucent buttons with white LED backlighting and engravable faceplate.
To prevent accidental button presses, the touchpanel and pushbuttons are
automatically disabled whenever the lid is not fully opened.
Cable Storage Compartment—The C2N-FT-TPS4 also provides for extensive
connectivity through an easy pull-out cable storage mechanism to support a wide
range of applications and signal types. Eight grommeted holes are provided in the
bottom plate, allowing for smooth pass-thru of virtually any type of AV,
communication, control, or data cable (cables not included). When not in use, the
user end of each cable stows neatly within the FlipTop compartment while excess
cable simply drops out-of-sight below the box. An optional AC power receptacle
within the compartment is also available.
High-Speed Connectivity—Both Cresnet and high-speed Ethernet are standard on
the C2N-FT-TPS4, providing for easy network integration and seamless
communications with Crestron control systems.
> Stylish flush-mount FlipTop housing
> Integrated 3.6" active matrix color touchpanel
> 16-bit Isys graphics | 320 x 240 resolution
> Synapse Image Rendering Algorithm
> 10 translucent white backlit pushbuttons
> WAV file audio feedback
> Easy pull-out universal cable management
> Optional AC power outlet
> Cresnet and Ethernet communications
AVAILABLE MODELS
C2N-FT-TPS4-B
3.6" FlipTop Touchpanel Control Center, Black Anodized
C2N-FT-TPS4-BALUM
3.6" FlipTop Touchpanel Control Center, Brushed Aluminum
C2N-FT-TPS4-U-B
3.6" FlipTop Touchpanel Control Center without AC Outlet, Black Anodized
C2N-FT-TPS4-U-BALUM
3.6" FlipTop Touchpanel Control Center without AC Outlet, Brushed Aluminum
SPECIFICATIONS
Touchpanel
Display Type: Active matrix color LCD
Size: 3.6 inch (9.1 cm) diagonal
Resolution: 320 x 240 pixels
Color Depth: 18-bit, 262,144 colors
Brightness: 300 nits (cd/m2)
Contrast: 300:1
Illumination: Edgelit fluorescent
Viewing Angle: ±80° horizontal, +80°/-50° vertical
Processor
CPU: 32-Bit Freescale Coldfire
®
Microprocessor
Processing Speed: 96 MIPS
Memory
8 MB Flash, 16 MB DDR RAM
Graphic Engine
16 Bit non-palette graphics; 65,536 colors; Synapse image rendering algorithm
Ethernet
10/100BaseT, full duplex, IEEE 802.3u compliant
Buttons
Keypad: (10) translucent pushbuttons, white LED backlit, programmable
Reset: Hard reset via small hole above touchscreen, reboots the touchpanel
SETUP (bottom): Used for touch-settable ID (TSID)
LED Indicators - Bottom Panel
PWR: (green) Indicates 24 Volts DC power supplied from Cresnet control network
NET: (yellow) Indicates communication with Cresnet system
SETUP: Used for touch-settable ID (TSID)
Audio
Audio Feedback (WAV): 8 bit PCM, mono, 8 kHz sampling rates
Amplification: 1 Watt for built-in speaker
Connectors - Front Panel
125V (optional): (1) 3-prong grounded AC socket, AC power pass-thru outlet
Maximum Load: 10 Amps @ 125 Volts AC, 50/60 Hz
Connectors - Bottom Panel
125V (optional): (1) 6’ Grounded line cord, passes through to front panel AC power outlet
NET: (2) 4-pin 3.5mm detachable terminal blocks, Cresnet slave ports, paralleled
ETHERNET: (1) 8-wire RJ45 with 2 LED indicators; 10/100BaseT Ethernet port
Green LED indicates link status, Yellow LED indicates Ethernet activity
G: (1) 6-32 screw, chassis ground lug
www.crestron.com
|
800.237.2041
Crestron C2N-FT-TPS4
3.6" FlipTop Touchpanel
Control Center
Shown
with optional
AC power outlet