Instruction Manual

CRESTRON
Reserved Join Numbers
A reserved join number is a feature of the software that enables a designer to create a
button on a touchpanel page that either calls up the Setup Menu, ramps contrast, etc.
The table shown below provides a list of reserved join numbers available within the
software.
Reserved Join Numbers for Series 3200 Touchpanels
JOIN NUMBER FUNCTION
V
ALUE
1016 Brightness On
1017 Brightness Low
1018 Brightness Medium
1019 Brightness High
1023 Contrast Up
1024 Contrast Down
1035 Call up Setup Menu Not Applicable
1160 Keyclick Volume Up
1161 Keyclick Volume Down
1172 Keyclick On
1173 Keyclick Off
Problem Solving
Troubleshooting
The table below and on the next page provides corrective action for possible trouble
situations. If further assistance is required, please contact a Crestron customer
service representative.
Series 3200 Touchpanel Toubleshooting
TROUBLE
POSSIBLE
CAUSE(S)
CORRECTIVE ACTION
Touchpanel
does not
function.
Touchpanel is not
communicating to the
network.
Use Performance Viewport (via SIMPL Windows
or VT Pro) to poll the network. Verify network
connection to the touchpanel.
Verify touchpanel is in "CRESNET II" mode as
defined in "Interface Menu", page 13.
Touchpanel is not
receiving network
power.
Confirm that power is supplied to the network.
Touchpanel is
incorrectly calibrated.
Enter "SETUP MODE" and recalibrate.
Operations Guide - DOC. 5725 Series 3200 Touchpanels • 19