- Crestron Electronics Server User Manual
2
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS - All the safety and 
operating instructions should be read before 
the product is operated.
KEEP INSTRUCTIONS - The safety and operating 
instructions should be kept for future 
reference.
HEED WARNINGS - All warnings on the product 
and in the operating instructions should be 
followed.
FOLLOW INSTRUCTIONS - All operating and use 
instructions should be followed.
CLEANING - Unplug this product from the wall 
outlet before cleaning. The product should 
be cleaned only with a soft dry cloth. Never 
clean with furniture wax, benzine, insecticides 
or other volatile liquids since they may 
corrode the cabinet.
ATTACHMENTS - Do not use attachments not 
recommended by the product manufacturer 
as they may cause hazards.
WATER AND MOISTURE - Do not use this product 
near water - for example near a bathtub, 
wash bowl, kitchen sink, or laundry tub; in a 
wet basement; or near a swimming pool; and 
the like.
ACCESSORIES - Do not place this product on 
an unstable cart, stand, tripod, bracket, or 
table. The product may fall, causing serious 
injury to a child or adult, and serious damage 
to the product. Use only with a cart, stand, 
tripod, bracket or table recommended by the 
manufacturer, or sold with the product. Any 
mounting of the product should follow the 
manufacturer’s instructions and should use 
a mounting accessory recommended by the 
manufacturer.
CART - A product and cart combination should be 
moved with care. Quick stops, excessive force 
and uneven surfaces may cause the product 
and cart combination to overturn: 
VENTILATION - Slots and openings in the cabinet 
are provided for ventilation and to ensure 
reliable operation of the product and to 
protect it from overheating. Do not block 
any ventilation openings. The openings 
should never be blocked by placing the 
product on a bed, sofa, rug or other similar 
surface. This product should not be placed 
in a built-in installation such as a bookcase 
or rack unless proper ventilation is provided. 
Install in accordance with the manufacturer’s 
instructions.
POWER SOURCES - This product should be 
operated only from the type of power source 
indicated on the marketing label. If you are 
not sure of the type of power supply to your 
home, consult your product dealer or local 
power company.
LOCATION - The appliance should be installed in 
a stable location.
NONUSE PERIODS - The power cord of the 
appliance should be unplugged from the 
outlet when left unused for a long period 
of time. 
GROUNDING OR POLARIZATION - If this product 
is equipped with a polarized alternating 
current line plug (a plug having one blade 
wider than the other), it will t into the outlet 
only one way. This is a safety feature. If you 
are unable to insert the plug fully into the 
outlet, try reversing the plug. If the plug does 
not t into the outlet, contact your electrician 
to replace your obsolete outlet. Do not 
defeat the safety purpose of the polarized 
plug. If this product is equipped with a three-
wire grounding type plug, a plug having a 
third (grounding) pin, it will only work in a 
grounding type power outlet. This is a safety 
feature. If you are unable to insert the plug 
into the outlet, contact your electrician to 
replace your obsolete outlet. Do not defeat 
the safety purpose of the grounding type 
plug.
POWER CORD PROTECTION - Power-supply cords 
should be protected from being walked on 
or pinched particularly at plugs, convenience 
receptacles, and the point where they exit 
from the product.
OUTDOOR ANTENNA GROUNDING - If an outside 
antenna or cable system is connected to the 
product be sure the antenna or cable system 
is grounded so as to provide some protection 
against voltage surges and built-up static 
charges. Article 810 of the National Electric 
Code. ANSI/NFPA70 provides information 
with regard to proper grounding of the mast 
and supporting structure, grounding of the 
lead-in wire to an antenna discharge unit, 
connection to grounding electrodes, and 
requirements for the grounding electrode. 
See Figure A.
LIGHTNING - For added protection for this 
product during a lightning storm, or when it is 
left unattended and unused for long periods 
of time, unplug it from the wall outlet and 
disconnect the antenna or cable system. This 
will prevent damage to the product due to 
lightning and power-line surges.
POWER LINES - An outside antenna system 
should not be located in the vicinity of 
overhead power lines or other electric light or 
power circuits, or where it can fall into such 
power lines or circuits. When installing an 
outside antenna system, extreme care should 
be taken to keep from touching such power 
lines or circuits as contact with them might 
be fatal.
OVERLOADING - Do not overload wall outlets, 
extension cords or integral convenience 
receptacles as this can result in a risk of re or 
electric shock.
OBJECT AND LIQUID ENTRY - Never push 
objects of any kind into this product through 
openings as they may touch dangerous 
voltage points or short-out parts that could 
result in a re or electric shock. Never spill 
liquid of any kind on the product.
SERVICING - Do not attempt to service this 
product yourself as opening or removing 
covers may expose you to dangerous voltage 
or other hazards. Refer all servicing to 
qualied service personnel.
DAMAGE REQUIRING SERVICE - Refer all servicing 
to qualied service personnel. Servicing 
is required when the apparatus has been 
damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been 
spilled or objects have fallen into the 
apparatus, the apparatus has been exposed to 
rain or moisture, does not operate normally, 
or has been dropped.
REPLACEMENT PARTS - When replacement parts 
are required, be sure the service technician 
has used replacement parts specied by the 
manufacturer or have the same characteristics 
as the original part. Unauthorized 
substitutions may result in re, electric shock, 
or other hazards.
SAFETY CHECK - Upon completion of any 
service or repairs to this product, ask the 
service technician to perform safety checks 
to determine that the product is in proper 
operating condition.
WALL OR CEILING MOUNTING - The product 
should not be mounted to a wall or ceiling.
HEAT - Do not install near any heat source such 
as radiators, heat registers, stores, or other 
apparatus (including ampliers) that produce 
heat.
The lightning ash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within the 
product’s enclosure that may be of sufcient magnitude to 
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the 
literature accompanying the appliance.










